John P September 03, 2016 for Model Number JGB282DET2BB I'm converting back to Gas from lp. I have the original Natural gas Cooktop orifices but don't remember changing the oven and broiler ones. Do these need to be switched to natural gas orifices ? If they do I cannot find any part number for them and i don't remember them coming with LP ones in the kit.
1 Answer John, On this model it is showing that the oven has to be converted with orifices as well. This will require the broil elbow WB28K10310 and the oven safety valve WB19K10078. Unfortunately this is the only way to get the natural orifices. Read More...
Robert Z. January 27, 2016 for Model Number GE Profile model no. PGP989SN1SS I'm looking for the correct orifices for propane on my cook top. It has one small, 2 medium, and one large. Do I need a special tool for it or just standard sockets? I just thread all the way down till its tight then? Thank you
1 Answer Hello Robert, You will need to order WB28X26296 for the right rear, two WB28T10017 for the left front and left rear, and WB28X26295 for the right front. You will need a 7 mm socket to remove and install these orifices. They will thread to the bottom without over tightening. Read More...
Troy January 05, 2016 for Model Number JGSP44AEV2AA Which parts do I need to convert this GE stove to propane? The installation manual says that the L.P. orifice studs are on a bracket behind the storage drawer, but the previous owner of the stove must have removed and discarded them. Thank you
1 Answer Hello Troy, You will need WB28K5087 for the small burners, WB28K145 for the medium burners, and WB28K146 for the large burners. Read More...
Kay September 21, 2015 for Model Number JGBC156EN1WH I purchased a used GE stove and it has no orifices to convert to propane. Can you tell me what part numbers I need? Thanks in advance!
Steve December 01, 2014 for Model Number C2S980SEM5SS I'm changing from lp to nat gas and was wanting to know if this model you need to change the orifice or just adjust.If i need to change the orifice can i just drill them out sense i'm going from lp to nat gas? Is there a manual on doing the conversion?
1 Answer Steve, The LP orifices must be changed to Natural gas orifices. The LP orifices are larger than the natural gas orifices and you would need the Natural. To remove you would need to take the burner caps and burner heads off and then you can use a wrench to get the orifices off. Read More...
Walt August 31, 2014 for Model Number jgp310el1bc Changing to propane, what orifice would I need, was nat. gas. Thanks, Walt
1 Answer Hello Walt! There are not orifices or conversion kits needed to convert to LP, the unit is adjustable. You'll need to bottom the orifices out and come back up one and a half turns. Adjust the burner flame until it is blue. Thanks. Read More...
Frank August 14, 2014 for Model Number JGB605SET1SS I would like to get the parts for the parts needed to convert from propane to natural gas. Thanks.
1 Answer Frank, to convert back to NG you'll need to purchase the orifice holders. The left front holder is part number WB28K10813, the left rear holder is part number WB28K10815, the center is part number WB28K10289, the right front holder is part number WB28K10812, and the right rear holder is part number WB28K10817. You'll need to flip the regulator back to NG. Thanks. Read More...
Anna August 06, 2014 for Model Number GE JGP328WECWW I'm trying to change my stove over from natural gas to propane. Can you suggest the right orifices to use for a GE JGP328WECWW stovetop? The numbers on the two orifices we've removed are 84L and 79L, and we're not actually certain whether these are for natural gas or propane since we bought the stove used. Thanks for your help!
1 Answer Anna, you'll need two orifices part number WB28T10017 and two orifices part number WB28T10017 to convert the unit to LP. Hope this helps you. Thanks. Read More...
Andy O. August 03, 2014 for Model Number JGP933BEK1BB I need to convert from natural gas to LP. What orifaces do I need? Thanks.
1 Answer Andy, the small burner uses orifice part number WB28K10031, large burner uses orifice part number WB28K10214, medium burner uses orifice part number WB28K10215, and the right front burner uses orifice part number WB28T10033. Thanks. Read More...
Jason June 03, 2014 for Model Number jpg328bek2bb I need the parts to covert from LP to natural gas please.
1 Answer Jason, I believe your model should read JGP328BEK2BB. You'll need the right rear tube WB28T10108, left rear tube WB28T10132, left front tube WB28T10227 and right front tube WB28T10136 to convert the unit back to NG. Thanks. Read More...