Joanna February 05, 2020 When the part is a baffle for the right side of the dishwasher, does that mean for the right side when one is facing the dishwasher?
Sybil J. May 14, 2015 I do not have a manual for my dishwasher. . Where do I find the model number onGE Pot Scrubber 600?
1 Answer Hello Sybil! Here is a link to our model number locator tool. Hope it helps! http://www.appliancepartspros.com/modelnumber_locator.aspx Read More...
Brian July 15, 2012 for Model Number Gsd5560g03ss How do you remove and replace the tub corner baffle?
1 Answer Hello Brian. The old baffle lifts out of the corner of the tub and the new baffle WD8X227 presses into place. Read More...
Kiki June 11, 2012 for Model Number GE GSD940L Does this baffle get installed at the bottom of the tub where the hinge is located? It looks just like the one that is in my machine and I am hoping that a new one will keep the dishwasher from leaking a bit from this lower right corner. Thank you.
1 Answer Hi Kiki. Yes this is the part that my be missing from your dishwashers front inner lower lt. corner. Tub Corner Baffle -WD8X228. For right side use WD8X227. Thank You. Read More...
Mario R. May 11, 2011 for Model Number GE Nautilus My GE Nautilus is not draining water. I removed the panel and ran the motor, which seems to be ok, but I notice that the white plastic fan shaped piece that seems to have to drop "down" in order for the pump mechanism to engage does not engage. When I push it with my finger, it engages fine and the water drains. Then the plastic piece resets to "up". Does this mean I have to replace the whole machine or is this something more easily fixed?
1 Answer Hello Mario. You will need to test and see if there is power coming to the solenoid when the machine is in drain cycle. If so, but the solenoid does not engage, you will need to replace the solenoid WD21X10060. You can test this with a multi-meter MA-DM1. Here is a link on how to use a multi-meter. Hope this helps. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Jim K March 31, 2011 My GE Portable Dishwasher works fine but leaks at the bottom under the front door. Could it be the corner baffles are damaged and need replacing?
1 Answer Hello Jim. You will need to inspect the corner baffles for wear. Also look at the door seal and make sure there are no suds inside the dishwasher from to much soap. Hope this helps. Read More...