Patricia December 30, 2019 for Model Number EVM1750SM1SS My turntable quit spinning. The spinner is broken. Which part do I need.
1 Answer Patricia, if the plastic coupler has broken, then the part number for the replacement is WB06X10420. If the motor shaft does not spin, and the motor receives 120VAC, then the motor WB26X10233 would need to be replaced. Read More...
Kathy August 14, 2019 for Model Number em031mzc-x1 Hello, Which turntable shaft should I purchase for this model number?
1 Answer Kathy, unfortunately, we would not have any information on Hamilton Beach products. Read More...
Carl May 21, 2019 My turn table coupler just broke. It has three different part numbers on it. They are JVM1640 JVM1440 JVM1430 does this mean any of these numbers will work in my microwave?
1 Answer Carl, if you could provide the model number for your appliance, this will allow for the most accurate part number to be provided. The markings on the coupler are for the manufacturers records and do not indicate their part number. Read More...
John May 07, 2019 for Model Number turntable coupler AP3416049 Microwave will not turn when heating food. Suspect the coupler is not engaging properly. Coupler seems to fit but table does not turn.
1 Answer John, you will want to test the turntable motor to see if it is receiving 120VAC during operation. If it is receiving voltage and not turning, then you will have a motor issue as the coupler is fitting onto the motor shaft. If it is not receiving voltage, then the voltage would have to be traced back to point of voltage loss. Read More...
Eddy November 21, 2018 for Model Number PSB1001NSS01 What is the part # for the turntable coupler . Also what is the part # for the glass urntable?
1 Answer Eddy, The parts requested / needed for your product are : WB06X10693 / WB06X10693 MICROWAVE TURNTABLE SHAFT, and WB27X43590 / WB49X10166 Microwave Glass Tray. Both parts are in stock and available at this time. Thanks, Read More...
Jennifer October 22, 2018 I have a motorhome sylvania model SR11092BNG SYL060300783G microwave. I have the turntable part but it doesn't catch the pin to seat and spin... What is the length of the stem on these parts? thank you
1 Answer Jennifer, Unfortunately we do not have any parts or technical information for Sylvania Microwaves. Read More...
Nancy B October 18, 2017 for Model Number Oster microwave ogb81101 I need a turntable coupler for foster microwave model ogb81101
Mj October 17, 2017 Turntable Coupler: PS651211 I bought this coupler for my microwave but it doesn't fit even though I get the right model number. There is a little ridge on the side of the coupler and it won't allow it to fit all the way into the hole. So basically it is at an angle and the plate that sits on top of it is at an angle. What am I doing wrong? Thanks!
1 Answer MJ, Wouldn't think you're doing anything wrong. The coupler should fit and be pressed down onto the turntable motor shaft. The "little ridge on the side of the coupler" could be "slag" left over from the extrusion process, but not likely. The opening in the base of the cavity is usually a bit larger than the way you described it, but you didn't supply a model number so we can re check and verify the correct part. Use a small file, and remove the ridge on the coupler may be an option you could consider. Read More...
Richard May 04, 2017 for Model Number VL902539B The brown coupler (JVM 1630 OTR8) glass turn table of our microwave. How do I order the proper replacement? Based on my search no replacement part is listed.
F Paint June 19, 2016 for Model Number FMV158FMB Fridgidare Microwave pt# 5304456173. The part number for the turntable coupler is no longer available. is there a replacement part that is listed somewhere else?
1 Answer F Paint, This part WB06X10420 has been permanently discontinued by the manufacturer with no suitable replacement given. Read More...