Emily February 23, 2017 for Model Number NE58F9710WS Hello, My touch screen/display works, but the oven temp and clock does not show. Any idea on what part I would need to fix this?
1 Answer Emily, The most likely cause for this issue will be a faulty display assembly which is part number DE96-01027A. Read More...
Terri October 19, 2016 for Model Number Samsung NE589500SS The display panel is totally black and I'm not able control my clock, oven, etc but the burners work. Darren (other person question who had the same issue) I went by the response that was given to him and ordered the part #DE96-01027A Assy Display and installed it. It still doesn't work "totally blank". Before I send the part back is there anything else I should check? I made sure all the connectors where tight. I'm not sure if there is anything more I can do.
1 Answer Terri, You will want to check the ribbon connection at the main PCB to make sure that there is a good connection with no corrosion. If this checks ok then the most likely issue will be the main control board that is faulty. Read More...
Darren August 15, 2016 for Model Number NE 58F9500SS AA THE TOUCHSCREEN ON OUR SAMSUNG RANGE IS TOTALLY BLANK AND DARK, THE SURFACE ELEMENTS WORK BUT THE INDICATOR LIGHTS FOR THEM DONT. I AM FIGURING THAT THE TOUCHSCREEN DISPLAY IS BAD JUST WANTED TO SEE IF THERE IS ANYTHING ELSE I SHOULD CHECK
1 Answer Hello Darren. Check and make sure all the wiring is good and tight on the unit. If so, you will need to order and replace the display board on the unit. Read More...
Arturo August 13, 2016 for Model Number Ne58f900ss Does it come with the glass screen? Or how do I go about taking the tape/wire hooked up to glass screen
1 Answer Arturo, The glass screen does not come with the display assembly and to remove the ribbon harness, where it connects to the board, pull up on the top part of the connector from the sides and it should lift up and the ribbon can be pulled out. Read More...
Darnia April 19, 2016 for Model Number NE58F9500SS I am looking for the control board that controls the upper surface cooling fan. Is this the correct part? >>AP5800743
1 Answer Darnia, The part number for the control board that controls the blower would be the main control board DE92-02439G. Read More...
Arnie March 22, 2016 for Model Number NE58F9500SS/AA Hello, can you tell me the procedure on how to replace part# "DE96-01027A" control computer in the front control panel of this model slide in range?
1 Answer Arnie, If you open the oven door there should be 3 or 4 screws under the panel that you will need to remove and possibly one or 2 on the side of the control panel to remove in order to take the control panel off to change the display assembly. Read More...
Larry M November 29, 2015 for Model Number NE58F9500SS/AA-0000 Can I buy just the stainless front piece #1-6 on assy display ne-f900a,1c part #ap5800743
Niki February 15, 2015 for Model Number NE58F9710WS/AA-0000 Need to replace the touch screen mother board. Do you have it in stock?
1 Answer Niki, the display assembly listed for your model is part number DE96-01027A. You may click on the part number to view stock and parts information. Thanks! Read More...
1 Answer Ravi, To remove the control panel for the unit you will need to pull the unit out from installation and remove the rear cover over the control panel. This will give you access to the components on the control. The display will be able to be removed from here. Read More...