Vince B. October 27, 2012 for Model Number Rv36w. Serial 261835 Unit won't work. Z1 appears burnt and had continuity between L3 and fuse. What is part number of new main board and do I need new circuit board? What is new circuit board part number?
Bill September 24, 2012 for Model Number RV36B Randomly, my fan on the vent just comes on. Is it likely the board, or some other problem? Thanks
1 Answer Hello Bill. Make sure that a button is not sticking on the unit. If not, replace the control board DE81-07744A on the unit. Read More...
John F. September 21, 2012 for Model Number RSD30S Do you carry touchpad/control panel for RSD30S model? Also, filter?
1 Answer John, the membrane is part number 82063B and the convection filter is part number DE81-04961A. Thanks! Read More...
Jim H. September 11, 2012 for Model Number rv30b My vent fan motor runs all the time. The vent raises and lowers but the fan runs all the time. I am unable to change the speed even when pressing the other speed buttons. The buttons light when pressed but that is all they do except the up and down button which works normal. Is this a circuit board problem or a switch adjustment problem? The circuit board has a part # stamped on the back of 82622.
1 Answer Hi Jim. If the on key is stuck electrically then it will stay on no matter what. Key Printed Circuit Board Item Number: DE81-09578A. - This Keyboard (PCB) is used on Dacor raised vent models RV30, RV36 and RV46. For the rubber key touch pad order DE81-07764A. Thank You. Read More...
Vince August 14, 2012 for Model Number RV36W My 18 yr old cooktop downdraft vent needs a new main control board. Your site says your #AP4366857 will work the same as dacor part #700991. My dealer says the Dacor # is 86100 which has been discontinued for 3 or 4 years. What is Right?
1 Answer Hello Vince, If you read closely, you will find that the board you are asking about can be used for RVs only. The RVC and RVR boards are no longer available. Read More...
Linda April 01, 2012 for Model Number RV36R The main control board has a burned spot and has stopped working. The part # is 82633 and its for a DACOR RV36R serial# RH8391172. What board can I buy that will work?
Lenny March 08, 2012 for Model Number RV46[MFG/1995 The correct wiring connections to the fan motor-not this units dates to 1995.
1 Answer Hi Lenny. All the information we have says this is the correct board for your unit. The upgraded control board will look different but will work. Plug in as normally connected. The new board will determine the correct options you will utilize. Part # DE81-07744A.Main Control Board Assembly - Used on RV models only. The board for the RVC and RVR models have been discontinued. Thank You. Read More...
Bob January 29, 2012 for Model Number RV30S My DACOR cooktop and ventilator are about 19 years old and the raised downdraft ventilator has needed the main control board assembly (MCBA) replaced twice... we were told the rubber touch pad sometimes contributes to malfunction. Well it has once again stopped working... after just working now and then... but only if I pushed that button just right. I haven't checked to see whether my unit's DACOR No. is 700991 but in any case I am wondering whether your AP4366857 part will replace our unit's MCBA.
1 Answer Hello Bob! Yes, the main control board assembly part number DE81-07744A will work on your Dacor model RV30S. Thanks! Read More...
Paul January 20, 2012 for Model Number Dacor RV-36 I have a 12 year of model RV-36 I have had two main control pcb boards fail so far. I now need another one. Is the part number 72881, your part AP3672785 the very latest version of the board? Its my understanding dacor has improved this board.
1 Answer Hello Paul! Part number 72881 has been discontinued and has been replaced with our part number DE81-07744A. This is the most updated part the manufacture offers in replaced to 72881. Thanks! Read More...
Jeff H February 27, 2011 my dacor 72881 for dacor rv36w looks different than your photo it has a burned area on circuit board under part labeled Z1 is this a zener diode? can i just replace this part?