Peter D. December 28, 2014 for Model Number ALY2280BDS The three top burners on our stove appear to be pressed in place. Are they replaceable? Thanks
1 Answer Hello Peter, These are sealed burners and they are removed from the cooktop by turning them about 1/3 od a turn counterclockwise. If they are too tight, you can remove them with a strap wrench if done carefully so as not to damage the burners. Read More...
Lana D. June 24, 2014 for Model Number 35FA-931 x Serial # 10C633160847 I need right front large burner, do you have one? Thanks
1 Answer Hello Lana. The right front large burner for this unit was part number 7406P024-60. Unfortunately the manufacturer has discontinued this part and we no longer have any left in stock. Thanks! Read More...
Christine June 04, 2014 for Model Number MGR5750ADA I received this part and installed it. It does work better....blue flame and no blackened pots. Thank you for your prompt service. One problem, and I don't know if this is a totally separate issue or related to the burner. That burner only lights with a match now. The electronic ignition does not work. Do you know if that is a burner problem or something else? Any suggestions or info. would be greatly appreciated. Thank you again.
1 Answer Hello Christine. You need to check and make sure the igniter is plugged into the harness for that burner. If so, replace the switch on the unit. Read More...
1 Answer Doyle, The burners for a gas range would never have charcoal in them. This would cause the unit to not work. Read More...
Gary March 27, 2014 The burner heads burner out after two years or so. The flame get to be orangish yellow and does not produce sufficient heat, Cooking times increase, boiling water takes forever. Once I replace the burner head everything returns to normal
1 Answer Gary, The issue may not be caused by burnt out burner heads. If you check the ports on the burner head, it is likely that they are getting clogged up. If you clean them the unit should go back to normal. Read More...
Randall729 December 02, 2013 for Model Number MGR5770ADW CONFUSED about getting the right part from you. Here's what I have. Maytag Model #MGR5770ADW gas range. The right front burner is leaking gas UNDER the rim of the burner head. I don't know the difference between part # mfg3412d024-26 or the mfg #3412d024-28. I don't know what the sealed burner consists of? would this part help with ignition of the burner? Have had help from NINJA in the past. Appreciate pointers and getting the part number straight so we can order.
1 Answer Randall, The WP3412D024-26 3412D024-26 is the correct burner for the model number you supplied. This will be a complete, gray in color burner assembly, and will have everything you need to replace the original. The 3412D024-28 3412D024-28 is the same burner assembly in a different color (tan). Yes, depending on the issue the replacement burner could solve the ignition issue, and solve the gas leak as well. Read More...
Jose November 25, 2013 for Model Number Maytag Performa What is the part # of the burner? Do you guys have it? Thanks.
1 Answer Hello Jose. We will need your model number to help you with this. Please post your model number with a new question on the parts page. http://www.appliancepartspros.com/modelnumber_locator.aspx Read More...
Patricia September 25, 2013 for Model Number CGR3742BDQ Will this burner head fit my stove? My serial number is 1378908ZF.
1 Answer Hello Patricia! Yes, the burner head WP3412D025-09 is the correct replacement and will fit your model CGR3742BDQ. Thanks! Read More...
Earl September 15, 2013 for Model Number Crosley Gas Range When turning on 1 burner all igniters spark ! After the flame comes on they continue sparking.
1 Answer Hello Earl. Make sure the burners are clean. It is normal for all to spark. If they continue, either the spark switch or the module will need to be replaced if the burners are good and clean. Read More...
Mike September 11, 2013 for Model Number 5710ADW Have a gas leak between burner head and pan. Was wondering if new burner head will resolve problem, if so, is head available and what is cost. Thanks Mike
1 Answer Hello Mike. It sounds like you need to order part number WP3412D024-26 for the unit. Read More...