Jennair 2002 Model June 20, 2019 for Model Number JSD2789GES My refrigerator door is not closing completely, has very little gravity. Freezer side works great. I have to push the refrigerator side close and sometimes the freezer side pops open and self-close. In the part list, it identifies three parts, a hinge pin, and two closers. One closer with a cup (WP6100572) and the other closer without a cup (WP61003647). As I look on the bottom of my refrigerator, the metal square bracket requires a hinge pin, since it is square too and appears that is the only piece that should fit in that slot. Do I need both the closer and if so do they sit/stack on top of each other? And if only one is needed, please let me know which one and the purpose /functionality over the other. Any guidance on the closers would be helpful.
1 Answer Hello Jennair 2002 Model, You will need to order WP61005724, two WP61003174, 61005726, and two 61003647 for the model provided. You should lubricate these with petroleum jelly, clean the face of the refrigerator cabinet and door seal with antibacterial soap, and try to move heavier items into the unit to prevent excessive wear of the hinge parts from the added weight in the door. Read More...
Mike July 15, 2015 for Model Number MZD2766GES Maytag fridge main door does not shut all the way unless its forced closed. Think its a worn out CAM, what are your thoughts and what parts do I need to fix it? Thanks alot.
1 Answer Hello Mike. You need to look and see if the hinge cam WP61003174 and the closer 61003647 is bad on the unit. Read More...
Carlos October 13, 2013 for Model Number MSD2732GR How do I install door closer for refrigerator door?
1 Answer Carlos, To replace the door closer WP61005724 you will first need to remove the upper hinge cover and the hinge. Remove the door from the unit and lay on a flat surface. Remove the old door closer and install the new one and reinstall the door. Read More...
Dave June 28, 2013 for Model Number JCD2389GES Jenn-Air side by side... Fresh food outer door doesn't seal shut. Info online says it's a worn-out cam. On the parts list page it has a "door closer" and a "door closer WITH something (forgot right now). Do I need BOTH of these things, or is the more expensive part some sort of combo of two parts? Very confusing. Thanks.