Lee November 22, 2022 for Model Number SCS3017RS05 Please provide all four of the Burner Orifice Holders and the spark On/Off switch part numbers.
1 Answer Lee, Thanks for the question!!! Here are the part numbers you requested: WPW10128449 right front orifice holder, WPW10128450 left rear orifice holder, WPW10128451 (uses two) left front and right rear orifice holder. The last part number you need for that switch harness is WP4456905. Read More...
Marc M September 16, 2018 for Model Number KGCS105GSS08 Hi, cannot determine correct orifice holders to replace for the 4 burners on this KA cooktop. Each burner is different BTUs: RF BURNER is 6,000btu, RR burner is 12,500BTUs, LF burner is 14,000 BTUs and LR burner is 9,000 BTUs. Parts don’t indicate correct orifice for each of these burners. I presume I need 4 different orifices but don’t know which one goes to each burner. All of the parts diagrams I can find only show one orifice. Are they all the same? Any help greatly appreciated! Thanks, Marc
1 Answer Marc, For the orifice holders you would need for the right front WPW10128448, right rear WPW10128451, left rear WPW10128450 and left front WPW10155786. Read More...
Ayyaz C June 12, 2016 for Model Number KGCK366VSS01 The holder-orifice attaches to the rail burner. There are two screws on the bottom of the rail burner that secures the holder-orifice in place. What is the part number for these 2 Phillip screws? I replaced the holder-orifice however, the Philips screws will not go back in all the way now.
Adam May 03, 2015 for Model Number KGCS166GSS07 Which of the orifice holder parts is the correct one for the LEFT FRONT burner?
Jim June 27, 2012 for Model Number kitchenaid kgcc506rww00 Does the part come with the igniter (the ceramic piece with the strip of metal inside)? That is what is broken on my stovetop. How do I remove the old part?
1 Answer Hello Jim! Yes, the orifice holder WPW10128451 comes with the ignitor. For the igniter only use part number WP9782116. You will need to remove the orifice holder and flip it over. There is a screw that you remove to remove the igniter. Hope this helps, thanks! Read More...