Customer Questions and Answers for Door Handle (Bsq) by Whirlpool

Lori, Part #1 is the clear plastic sheet adhered to the inside of the metal door liner of the microwave, a part you wont need to disturb or dismantle. In order to replace the door handle, you will need to dismantle the door. " 1. Unplug microwave oven or disconnect power. 2. Remove the air grille. 3. Remove the 1 T-10 Torx® screw from the top hinge of the door. 4. Lift the door up and off the other hinge to remove the door. 5. Place the door face down on a protective surface.1. There are 4 tabs on the top edge, 3 tabs on each side and 5 tabs on the bottom edge. 2. Use a putty knife to open the gap between the door frame and the choke seal. 3. Locate each tab and use a flat blade screwdriver to gently lift the choke seal and release each tab. Place the screwdriver in the slot directly beside each tab and lift from there. 4. Only lift enough to release each tab all the way around the choke seal to avoid bending and possibly breaking the choke seal. 2. Beginning at the bottom left corner, work your way across the bottom edge to release 4 tabs. Release 3 tabs on the right edge and 2 tabs on the left edge. 3. Gently lift the inner door from the bottom edge to release the 4 clips along the top edge. Handle removal: 1. Remove two screws from the door bracket that secure the handle to the front of the door. 2. The handle can be replaced without regard for orientation of top and bottom. Door bracket removal: 1. Remove two screws that secure the door bracket to the door frame. Door Latch Removal: 1. After removing the Inner door, turn it over. 2. Each door latch is secured with one screw. Remove the screw and slide the latch out of the slot in the inner door." These are "basic" instructions, your machine maybe slightly different, but you'll have the basics to perform the repair.

Hi Kevin, yes the handle for your model is black. Order part# 4393782 for the black handle. Thanks!

PJ, the microwave door handle in white is part number 4393777. Thanks!

You will have to take the door apart and unscrew the handle from inside. Click on the link for further installation help. http://forum.appliancepartspros.com/microwave-repair/255-microwave-handle.html