Beverly April 07, 2014 for Model Number Dv218aebxaa My dryers power comes on but will not show time nor will run to dry clothes. Would this be the fuse?
1 Answer Hello Beverly. You need to look for a bad belt on the unit. If the belt is good, check the thermal fuse and the door switch. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Gerry February 09, 2014 for Model Number DV419AE Is part number #35001119 the correct part for the Samsung Electric Dryer # DV419AE and is the heater coil and all limits included? What is the wattage of the heater?
1 Answer Hello Gerry! No, part number 35001119 is not listed for your model. According to the model number supplied you'll use part number DC97-14486A. This includes the thermostats, heater coil, and housing. Thanks! Read More...
Eric January 20, 2014 for Model Number DV444AEW/XAA I have an electric dryer made by Samsung. When I use your site to look up the heater part it comes up with a Whirlpool element part no AP4045843. And when I look at the diagram image it shows a gas dryer. Is that the right part?
1 Answer Hello Eric! The model number supplied, DV444AEW/XAA, is not pulling up in our system or the manufacturer site as a valid model number. Please double check your appliance model number and repost for further assistance. Thank you. Read More...
John December 26, 2013 for Model Number dv338aeb/xaa I need a replacement heating element for my Samsung dryer! What part number should I order?
1 Answer Hello John. Based on the information you provided, you will need to order and replace the heater assembly DC47-00019A on the unit. Read More...
1 Answer Jimb, The error code that you may be getting would be a tS. The t would look like an E missing the top line and the S would look like a 5. If this is the case then the error would be a thermistor failure. You would want to check the thermistor and wiring for the thermistor which would be located at the front of the duct. Read More...
Bg September 13, 2013 for Model Number Samsung dv350AE Samsung dryer will run, but not heat up. Model Number DV350AE. What heating element do I need to repair and where is it located on the dryer?
1 Answer Hello BG. First make sure the element is bad. Check and make sure you have 240 volts coming to the dryer. Check and make sure the unit is not set to Air Fluff. Also check the heater and thermostats and see if they are good. You can test these with a multi-meter MA-DM1. They should read closed for continuity. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
1 Answer Hello Joe. The element is located in the bottom right corner if you are facing the dryer. You will need to remove the front panel to access the heater in the unit. Read More...
Doug F. March 29, 2013 for Model Number DV337AER/XAA My dryer is a samsung dryer. It has a burned out heater element and the only replacement that the site has is an AP4045843. Is this the correct unit for my dryer since the site does not have my model number in it's parts base. Thanks Doug
Ron I. January 21, 2012 for Model Number Maytag MDE 9700 AYW The heating element has failed on my Maytag Neptune MDE 9700 AYW electric clothes dryer. Do I have to buy and replace the entire heater duct assembly? Or can I purchase just the heating element? Thanks!
1 Answer Hello Ron! The manufacture only offers the element in an assembly. The entire assembly will need to be replaced, part number WPW10222771. Thanks! Read More...
Rudy July 20, 2011 for Model Number MDE9700AYM Do you have a drawing which will show how to remove the heater duct?
1 Answer Hello Rudy! We do not have a diagram available, however, I have located the service manual to your product. Please check your e-mail for a copy of the service manual. Thanks! Read More...