Willy June 12, 2013 for Model Number Maytag MEW5627DDB Control switch OEM Part Number: AP4427175 MFG Part Number: 5701M799-60 Made by: Whirlpool Our Price $328.49. Hi my name is willy, I need some help with this Wall Oven I sent it to my mom overseas in JORDAN where the have only 220volts and the oven works to 300 F temp nothing over. She got an electric guy and saw it he told her you need to change the controller and it must work with 220V 50W. NOT 110/220 V 60W they only have in Jordan up to 60W. so please need some help what to do. I sent to her dryer washer and dishwasher they all work great and they had on them 110-220V 50-60W. So do you think if I buy this part it will work. thank you so much again
1 Answer Willy, Only having 50 hz coming into the unit would cause the units clock to run slow but the oven should still operate normally. You will want them to check to make sure that the clock is not set for Celcius rather than Fahrenheit as this will make a difference in the reading. It would be good to have a clock rated for 220 50 htz but this clock will work in the unit. Read More...
Kim Thiemann November 10, 2012 for Model Number Mer6875acb The inside burner of the right front burner stopped working, is this a fuse issue?
1 Answer Hello Kim, if your wiring is ok, it's likely a failure in the switch WP74003122 or the element W10823713 itself. Hope this helps! Read More...
Dj January 10, 2012 for Model Number MER6875AAS Would it be easy to replace the AP4427175 clock/control panel part myself?
1 Answer Hello DJ. These are not hard to replace. Disconnect the power and remove the back panel of the control panel. Remove the screws from the bracket securing the clock assembly WP5701M799-60. Remove the clock assembly and unplug the wires and install them onto the new clock. The re-install with the new clock assembly in reverse order. Hope this helps. Read More...
Dj January 10, 2012 for Model Number MER6875AAS I have a Maytag Gemini range (Model# 6875AAS) on which the control panel for the oven will not work. After brief (2min) power outage the clock on the panel did not come back on. When I tried to reset the clock I found that none of the buttons on the control panel worked. The stove top works because the dials can still be turned, but the oven won't because the push button panel is dead. I have checked the breaker box and no breakers are tripped.
1 Answer Hello DJ. Based on the information you provided, it sounds like the clock WP5701M799-60 is bad and will need to be replaced. Hope this helps. Read More...
Daryl December 05, 2011 for Model Number MER6875AAB We heard the stove beep like someone was trying to input something. It was like the timer had been set with no time. Cancel button beeps but cant input anything in to set the oven mode or temp. Cant input anything to check the quick test. What do we need to do?
1 Answer Hello Daryl. Based on the information you provided, it sounds like the controlsw WP5701M799-60 is bad and will need to be replaced. Hope this helps. Read More...
Richard M. September 28, 2011 for Model Number MER6875AAB/F/N/Q/sw Does the control panel come in colors to match the range. My range is a almond or cream color . Your picture of the control panel is pictured black in color.
1 Answer Hello Richard. According to the manufacture WP5701M799-60 is the correct part number for the almond/cream color. Hope this helps. Read More...
Richard M. September 28, 2011 for Model Number MER6875AAB/F/N/Q/SW One of the upper oven light wires shorted on the metal frame. When I replaced the light, the control panel upper oven light switch will not turn the upper oven light off(It beeps when pushed). Is there a way of replacing the a relay switch for the light or did the control panel get fried. Or is it something else?
1 Answer Hello Richard. Based on the information you provided, it sounds like the control board WP5701M799-60 is bad and will need to be replaced. Hope this helps. Read More...