Skip to Content

2 Day Quick Delivery!
365 Day Return Policy!
15 million satisfied customers
Over 2.1 Million Parts In Stock
Free Tech Support!
Google Trusted Store

Customer Questions and Answers for Electronic Control Board by Whirlpool

Best Seller

Manufacturer Part

Electronic Control Board

4.89 (64)

By: Whirlpool

Part Number: OEM18063840

Manufacturer Part Number: WPW10424330

The Electronic Control Board is an OEM part for Whirlpool ovens. This control board is essential for managing the oven's functions, including temperature settings, baking, broiling, and timing operations. It acts as the central brain of the oven, receiving input from the user and sending signals to various components to execute the desired functions.

Causes of a bad control board can include electrical surges, wear and tear from prolonged use, or damage from high temperatures. A faulty control board can prevent the oven from operating correctly, leading to various issues in cooking performance.

Symptoms of a bad oven electronic control board include:

The oven not heating
Error codes displayed on the control panel
Unresponsive or malfunctioning buttons
The oven shutting off unexpectedly

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

More

$248.17

Compare At:: $281.41
You Save:: $33.24

IN STOCK

Ships Monday Guaranteed

Add to Cart

Questions & Answers

For Whirlpool Electronic Control Board (Part Number: OEM18063840)

Harvey Z. June 11, 2018 for Model Number WFG361LVQ2

Control panel was flashing F2E0 and beeping, what is this code or what should I do?

1 Answer

Hello Harvey, This fault code indicates a stuck key on the touchpad WPW10424330. It will have to be replaced to correct the issue.

Read More...

Mike January 16, 2016 for Model Number wfg31lvs

My accubake shows a pict to clean and won't go off that. The oven doesn't work.

1 Answer

Mike, You will want to check the door lock assembly to make sure that it is not faulty and if it checks ok then the issue with the unit will be a faulty control board.

Read More...

Tom F. September 28, 2015 for Model Number WFG361LVD0

Oven converted to service with LP gas. Occasional smell of gas from the range while not in operation. Traced smell origin most probably to pilot stem. Suspected bad regulator solenoid. Replaced regulator. Gas smell problem still remains. Occasionally seems that the control unit may emit soft clicking sounds when not in use. Suspect perhaps that the control unit is bad and allowing pilot stem to release gas when not intended. Does this sound like a control board issue? This is a dangerous problem and we are about to simply replace an oven that should not have to be replaced. Thanks

1 Answer

Hello Tom, This sounds like an issue with one of the controls WPW10424330 or WPW10331686, but I would also replace the valve WPW10293048.

Read More...

Randy L February 09, 2015 for Model Number WFG374LVS-1

Start switch on oven is not working, took it out and took circuit board out of cover and plugged it in again. I pushed the start button and it keeps telling me to push start. Is it the start button or possibly the igniter gone bad. Hate to buy a new board only to find out it is the igniter. Any way to test it?

1 Answer

Hello Randy. It is not the igniter. It is the control board WPW10424330 on the unit that will need to be replaced.

Read More...

Tracy January 12, 2015 for Model Number WFG361LVD0

My oven used to count up from 100° to the temperature I set it to then beeped when it reached that temperature. Now it usually stops at about 190º and sometimes shuts off. I've turned the oven off, unplugged it and turned back on but then it only displays the temperature I set it to, still doesn't beep when it reaches that temp and will still randomly shut the oven off. What could be causing this and how can it be fixed? I've been without my oven for close to a month trying to figure out what the problem is. Please help.

1 Answer

Hello Tracy, This can be an issue with the ignitor, spark module, gas valve, temperature sensor, wiring harness, or the control board. The control board is the most likely on this configuration but the tech sheet should be pulled from the unit and the diagnostics mode run to pull the fault codes. This will pinpoint the circuit that is experiencing the failure.

Read More...

Rick September 18, 2014 for Model Number WFG361LVQ1

Hi, My oven temperature is off. It's not getting up to where it needs to be. A frozen pizza set at 400 degrees will not even melt the cheese. When increased to 460 degrees than pizza starts to bake. I have changed the oven temperature sensor 8053344, oven igniter 9758079 and gas valve 5306380. Still not getting up to temperature.Can you help ? Thanks Rick

1 Answer

Hello Rick. If the oven temp is not reading properly, and the sensor is now, you will need to replace the control board WPW10424330 on the unit.

Read More...

David August 21, 2014 for Model Number WFG374LVQ2

Control board does not light up. I have power at outlet.

1 Answer

Hello David. Test for power to the board. If there, and it does not work, replace the board. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html

Read More...

Henry July 22, 2014 for Model Number wfg371lvs1

Oven temp keeps rising past setting. Sensor w10181986 tests good.

1 Answer

Hello Henry. If the sensor is testing good, you will need to order and replace the electronic control board WPW10424330 on the unit.

Read More...

Ed S. August 04, 2013 for Model Number WFG361LVS

I have a gas range that is about 8 months old. The oven will not work. The display says that it is in the cool cycle of the clean mode. I have tried unplugging the range but it does the same. Any suggestions or do you think it is the electronic control board?

1 Answer

Hello Ed, This will be one of two parts. It will either be caused by the Door Latch Assembly WPW10107820 or the Electronic Control Board WPW10424330.

Read More...

Keith R. November 13, 2011 for Model Number wfg361lvq1

I changed the sensor and my oven is still running too hot. Now I must need the control .

1 Answer

Hello Keith. Yes, if you replaced the sensor, and the oven still over heats, you will need to replace the electronic control WPW10424330. Hope this helps.

Read More...

Have questions? Ask our pros!

Contact us in a way that is convenient for you

Call us 1-877-477-7278

Need Help? Chat with a Pro

Or ask a question by filling in the form

Share your thoughts with other customers

Over 2.1 Million Parts In Stock
2 Day Quick Delivery!
365 Day Return Policy!
Free Tech Support!
Google Trusted Store