Jlen April 23, 2011 for Model Number kithcen aid dishwasher/motor extremely loud K37ABMN-0677, P/N 8535759 K37ABMN-0677, P/N 8535759, the dishwasher was top of the line, but it sounds like a jet. I have to run it when I leave the house, literally! Help, lol. So I removed the motor the impeller doesnt turn good at all, should I replace? thanks
1 Answer Hello. Depending on the model number you might be able to repair the impeller. You could also purchase a motor and sump assembly and remove the old one and install the new assembly. We will need the model number to verify which part is correct. Thanks Read More...
Sidney April 19, 2011 for Model Number kudi01ilbs1 Can the motor pump assembly cause your dishwasher to leak water?
1 Answer Hello Sidney. Yes, if one of your seals is bad or if it is cracked, it can cause the dishwasher to leak. Hope this helps. Read More...
John April 06, 2011 That's what I though! Thanks. So from my understanding there's 2 motors in this machine, a pump and circulation motor? Which is the one I would need since my machine drains properly. The circulation motor? If so, is this the model? Thanks.
1 Answer You're welcome John! Yes, that is correct. There is a drain pump and a circulation pump/motor. You will need the motor-pump WPW10757217. You have the correct part number. Thanks. Read More...
John April 06, 2011 Hi again, thanks for the info. Since you only ship in the USA and I live in Canada, could you email me the actual part number from whirlpool so I can try and find a local vendor? Thanks again! I'm pretty sure AP4434021 is your part number only as your site is the only one that comes up on Google when I search for it! :)
1 Answer Hello John! Yes, WPW10757217 is our internal part number. Unfortunately, we do not have the Whirlpool OEM number available. You will more than likely have to contact the Whirlpool Canadian call center to verify the correct part number. Sorry! Read More...
John April 02, 2011 for Model Number Whirlpool Gold - Quite Partner III Mod: GU2300XTLQ3 - type: 577-0 Hi again, so I took everything apart inside the dishwasher and cleaned everything out (including the food-chopper) There was some debris (broken class / build-up of soap I'm guessing) which I cleaned out. I put everything back together and the machine is still whining pretty loudly. (it doesn't when it drains) It's almost like it's not pumping enough water or something.. like staling, but when I open the door there's water in there. The top rack dishes however still aren't getting cleaned properly.
1 Answer Hello John. It sounds like the motor-pump is bad and will need to be replaced. Hope this helps. Read More...
Nick R March 26, 2011 for Model Number GU2400XTPT6 When running the dishwasher there is a high pitched squeal. Can't stand to be in the house while its running. Will a pump correct this, or does it take a pump and motor assembly? Thank you
1 Answer Hello Nick. Disassemble the motor pump and see if there is any debris causing the noise. If all is clear, you will need to replace the assembly. Hope this helps. Read More...
Ray March 17, 2011 for Model Number KUDSO3FTS Water comes in, but then it just hums. When I press cancel it drains out the water. Thanks.
1 Answer Hello Ray. It sounds like you may have a bad motor-pump assembly. Check and make sure no debris has clogged it up. Hope this helps. Read More...
Gene March 16, 2011 for Model Number 66513752K602 I have a Kenmore Elite dishwasher model 66513752K602 that's about 5 years old. From time to time while it's washing, it growls and dishes in the upper rack no longer get cleaned. I have checked the sump for foriegn matter and removed some minor debris. I feel it is starving for water but I have good water pressure. Could it be the pump/pump assembly and/or a water level sensor? Suggestions?
1 Answer Hello Gene. You can check the float and make sure it is working properly. If so, you could have a bad motor/pump. Hope this helps. Read More...
Guest March 12, 2011 I have a kitchen aid model number kuds01fkpa1. I notice two model types for the main motor. Which one should I order?
1 Answer Hello, for the motor and impeller assembly you will order WPW10757217, you can also get the motor with the sump pump assembly part # W10782773. Read More...
Eric March 12, 2011 for Model Number Quiet Partner 3 Hello I have an issue with my dishes getting clean. I have removed and cleaned the chopper assembly. but when I found it the blade had popped off and the screen was totally clogged. I was able to repair the blade with some epoxy but the machine is still not getting the dishes clean. It fills and drains normaly but I suspected that the pump motor may be bad. I pulled it out and there is no rust or symptoms of a leak, but when I manually put power to the motor it does nothing at all. Any ideas/suggestions before I spring for a new motor? I just want to make sure I am buying the right part.
1 Answer Hello Eric. It sounds like you have narrowed it down to the motor-pump assembly. This should fix you problem. Hope this helps. Read More...