Jb H June 21, 2014 for Model Number sce30600b All oven control buttons work but the cancel. Would the overlay fix this?
1 Answer Hello! From the issue described, yes, it does seem as if you'll need to replace the overlay part number WP71002233. Thanks! Read More...
Jack H October 14, 2013 for Model Number SCE30600 The display is no longer working. Is it possible to just replace the display unit? Everything works fine.
Sam May 29, 2013 for Model Number SCE30600W Searching your website for control panel keypad for my Jenn Air electric range, model SCE30600W, which would be white in color, leads to the same part number (AP4089287) as for a model SCE30600B, which would be black in color. How can white and black be the same part number?? How can I be sure of getting a white one?
1 Answer Hello Sam. The white has been discontinued and it is only available in black now. Sorry. Read More...
1 Answer Louis, The F1 error code for this unit indicates that there is power to the element relay energized during time of day display. You will want to check the J2 harness to make sure that it is not shorted. If this checks ok then you would need to replace the power relay board W10757086. Read More...
Keith April 08, 2013 for Model Number sce30600w When my oven heats up to set temp above 390 -400 it will begin to beep afer a short time with an f5 error code. Any fix for this problem?
1 Answer Hello Keith. The F5 code is for a faulty sensor or the contact on the PRB is bad and you will need to replace the control board in the unit. Read More...
Shirley August 29, 2012 for Model Number SVD48600 At first the oven would quit and give us various error codes. Sometimes it would just turn itself off with an error code, usually f2, and then it would beep and beep until we switched off the breaker to stop it. Then it finally just died all together. The gas cooktop still works fine but there is no power to the oven or control panel. Do we fix it or just move on. Thanks for any help you can give.
1 Answer Hello Shirley, F-2 is the fault code for a stuck key on the control panel WP71002310. Read More...
David T. December 31, 2011 for Model Number SCE30600B Are there door and drawer parts that would give the range a more stainless steel look?
1 Answer Hi David. Unfortunately there are no stainless parts available for your unit. Thank You. Read More...
Asunriseview July 23, 2011 for Model Number SCE30600B Apparently we had a power surge. Panel doesn't light up and the timer keeps beeping but the stove and stove-top still works. Is the clock assembly the part that controls the lighting for everything including the touchpad? I found the panel but it appears to just be a replacement cover... Thanks,
1 Answer Hello asunriseview. Based on the information you provided, it sounds like the electronic control WP71001799 is bad and will need to be replaced. Hope this helps. Read More...