M September 11, 2011 for Model Number MVWC6ESWW1 Problem with unit not filling with selected temp water. Even the rinse water can be hot instead of cold. Hoses are hooked up properly. Unit is just over 1 year old. If I turn off the hot water valve, the washer won't fill at all or just trickle into tub. Outside water service water temp can be as high as 95 F+ in the summer where I live. Could this be an issue? Looking at replacing part # AP4364774 or maybe water temp switch?
1 Answer M, The extreme water temperatures could present a minor issue with the water temperature in the tub, but it will not affect the overall fill time. Your first check and repair, should be to flush the cold water supply and faucet, remove and clean, or replace the hose screened washer and screen in the water valve inlet. If you still have a water temperature problem, you're going to need the water temperature sensor switch WPW10248240. Good Luck and Thanks Read More...
Billy H. August 15, 2011 for Model Number MAYTAG MVWC6ESWW0 AUTOMATIC WASHER How do I replace the part AP4364774?
1 Answer Hello Billy. Here is a repair video link to help you change the water valve WPW10175893. The only difference will be the panel clips. They remove screws for the control panel, and your model number has clips under the front corners. You will use a flat blade putty or butter knife to remove them. Press in on the clips and flip the control panel backwards. Hope this helps. http://www.youtube.com/watch?v=QgmH5vWRGj8 Read More...
1 Answer Hello Billy. What is the model number of the unit your working on? Thanks. http://www.appliancepartspros.com/modelnumber_locator.aspx Read More...
Victor August 13, 2011 for Model Number MVWC6ESWW0 My maytag washer does not fill water at all (hot,warm, or cold). I have already replace the water valve, the water flow meter & the timer and still won't fill water in.
1 Answer Hello Victor. Based on the information you provided, it sounds like the sensor switch WPW10292584 is bad and will need to be replaced. Hope this helps. Read More...
Dan May 26, 2011 for Model Number mvwc6esww1 Can this valve not allow watter to go into the machine. The machine is 1 year 2 months old and out of warranty.
1 Answer Hello Dan. If there is no water going into the machine, you will need to replace WPW10248240. This is the load level switch. If it is bad, the unit does not fill with water. Hope this helps. Read More...