Parts for Thermador HDDW36FS-01: Range Hood Parts

The Module Operating is an OEM part for Bosch chimney-style range hoods. As the main control center, it regulates all hood functions including fan speeds, lights, timers, and sensors. Working seamlessly with other internal components, the operating module ensures precise hood operation.

Causes of a bad operating module can include water damage, failure of electronic components over time, or damage from power surges. 

Symptoms of a bad operating module include: 

• Inability to turn hood functions on or off
• Lights not illuminating when selected  
• Preset fan speeds not engaging properly
• Unusual noises or behaviors from internal workings

This Bosch operating module replacement restores full functionality to the hood. It is also compatible with some Thermador, Gaggenau, and Broan-NuTone models. Replacing the module ensures precise performance and conveniences like easy access to controls.

The Halogen Lamp is an OEM component specifically designed for select Bosch downdraft ventilation hoods. As an illumination source, it provides sufficient light for safe nighttime cooktop use.

Toughened outer casings protect encased bulbs against accidental breakage. Ventilated globe designs dissipate heat for prolonged lamp life while avoiding premature degradation.

Causes requiring replacement relate to cumulative burning hours expended. Direct physical impacts could also crack protective glass allowing water damage that accelerates filament failure. 

Symptoms of a bad lamp include:

• Diminished lighting failing to sufficiently illuminate cook surfaces   
• Flickering or inability to power on through expected lifecycles
• Broken housing fragments exposing live connectors to short circuits

This OEM Bosch replacement halogen lamp is also compatible with Thermador, Gaggenau, and some Kenmore range hoods employing self-contained lighting solutions. Proper bulb installation will restore intended visibility for safe evening meals.
 

The Halogen Lamp is an OEM component specifically designed for select Bosch downdraft ventilation hoods. As an illumination source, it provides sufficient light for safe nighttime cooktop use.

Toughened outer casings protect encased bulbs against accidental breakage. Ventilated globe designs dissipate heat for prolonged lamp life while avoiding premature degradation.

Causes requiring replacement relate to cumulative burning hours expended. Direct physical impacts could also crack protective glass allowing water damage that accelerates filament failure. 

Symptoms of a bad lamp include:

• Diminished lighting failing to sufficiently illuminate cook surfaces   
• Flickering or inability to power on through expected lifecycles
• Broken housing fragments exposing live connectors to short circuits

This OEM Bosch replacement halogen lamp is also compatible with Thermador, Gaggenau, and some Kenmore range hoods employing self-contained lighting solutions. Proper bulb installation will restore intended visibility for safe evening meals.
 

This is a fan motor that is installed inside several range hoods. It is located inside the hood and helps ensure the fan operates correctly. As a part of the fan, this motor helps filter smoke and other contaminants in the kitchen air to the outside of the home. It removes fumes, greases, steam, and heat from the air. If the fan is no longer operating on a range hood, this could be the result of a damaged fan motor. If that's the case, the component will need to be replaced.First, make sure the range hood is unplugged or the circuit breaker has been turned off. Remove the bottom panel and filters from the appliance. Take off the side panels and pull the range hood down from the cabinet. The fan blade will need to be removed to access the fan motor. Take out the old motor and install the replacement part before reassembling the range hood for use.The fan motor is sold as an individual item. It is a genuine OEM replacement component that is sourced directly from the manufacturer. This part is made for use with range hoods made by Bosch and Thermador.

This fuse holder secures the appliance's cartridge fuse and helps maintain a reliable power connection. Replacing a worn or damaged holder restores proper fuse seating and reduces risk of intermittent power or electrical faults. What it does:

• Holds the cartridge/inline fuse securely in the appliance's electrical circuit
• Ensures consistent contact to prevent intermittent power, appliance not powering on, or blown-fuse symptoms
• Provides a safe mounting point for the fuse so the fuse can protect the appliance from electrical surges
• Restores reliable connection when the original holder is cracked, loose, or corroded

• Disconnect power (unplug or shut off circuit breaker) before starting any repair
• Access the holder through the appliance service panel; keep track of any screws or brackets
• Replace the fuse with the correct type and rating before reapplying power

This cable harness routes and connects electrical circuits between components to restore proper power and signal flow. It replaces a damaged or worn wiring connector assembly to help resolve intermittent power or component failures. What it does

• Provides secure connections between control board, sensors, and powered components
• Restores power and signal continuity when original wiring is frayed, pinched, or corroded
• Helps stop intermittent operation, no-power symptoms, or components that fail to respond
• Maintains correct wire routing and connector fit for reliable operation

• Disconnect power before beginning any repair to avoid shock or damage
• Handle connectors gently and seat each plug fully; match connector shapes and clip locations
• Note original wire routing and secure harness with existing clips or ties to prevent chafing

This electronic control module manages the appliance's control signals and cycle logic so the unit can run selected programs and respond to user inputs. Replaces a failed or unresponsive main control board to restore normal operation. What it does

• Interprets user commands and starts/stops cycles according to selected settings.
• Controls timers, relays and sensors to sequence wash/heating/pump operations.
• Works as the appliance's logic center when displayed error codes point to control faults.

• Disconnect power before accessing or replacing the control to avoid shock.
• Handle the board by edges and avoid touching components or connector pins.
• Verify connectors are fully seated and secured before restoring power.

The Filter is an OEM part for Bosch range hoods. It is designed to capture and trap grease particles, preventing them from entering the ventilation system and keeping your kitchen air clean and fresh.

A bad filter can occur due to a buildup of grease and debris, damage from accidental mishandling or harsh cleaning agents, or normal wear and tear over time. Signs of a faulty grease filter include reduced airflow, unpleasant odors, or visible grease accumulation on surfaces and within the ventilation system.

Symptoms of a bad filter include:

• Reduced airflow and ventilation 
• Lingering odors in the kitchen
• Visible grease within the ventilation system

Replace your worn-out or damaged filter with this genuine OEM Bosch part to restore your range hood. This Bosch part can also be used on Thermador and Gaggenau appliances.
 

This air channel guides and directs airflow inside the appliance to maintain proper ventilation and circulation. Replacing a damaged channel restores correct air routing to help the unit run safely and perform as designed. What it does:

• Directs internal airflow between housing sections to ensure proper ventilation
• Helps the heating/air path operate efficiently and evenly
• Prevents air from bypassing critical components or causing hot/cold spots
• A worn or cracked channel can contribute to poor drying, reduced performance, or unusual airflow noises

• One air channel

• Intended for technicians or experienced DIYers; disconnect power (and gas if applicable) before accessing internal components
• Handle plastic parts carefully to avoid cracks; use proper fasteners and gaskets as shown in the service diagram