Parts for Frigidaire FRA14EHT211: 03 - Recomended Spare Parts

This air filter screens the air moving through your appliance's ventilation system, capturing odors and fine particles. Replacing a clogged or damaged filter helps maintain proper airflow so the unit vents and circulates air as designed. What it does:

• Captures odors and airborne particles as air passes through the unit
• Helps maintain proper airflow/venting performance
• Reduces debris buildup on internal components
• Common signs it's due: persistent odors, reduced airflow/venting, a visibly dirty or damaged filter

• 1 air filter

• Disconnect power and allow hot surfaces to cool before servicing
• Open the filter access panel or grille and note the filter's orientation
• Remove the old filter; seat the new filter fully and close the cover
• Restore power and verify proper airflow

The Heater is an OEM part for Frigidaire air conditioners. Designed to provide supplemental heating, this heater extends the usability of your air conditioning unit into the colder months, enabling both cooling and heating from a single appliance. 

Causes of a bad heater can include electrical faults like short circuits or failing elements, accumulation of dust or debris that impedes functionality, and general wear and tear that deteriorates its components over time.

Symptoms of a bad heater include:

• Reduced heating efficiency, failing to adequately warm the space
• Circuit breaker trips when the heater is turned on
• Unusual or loud noises during operation
• Smell of burning when the heater is active

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This dryer drive motor powers the drum and blower so clothes tumble and air circulates for effective drying. Replaces a worn or noisy motor to restore normal drum rotation and airflow. What it does:

• Spins the dryer drum so clothes tumble during the cycle
• Powers the blower wheel to move air through the drum and vent
• Stops abnormal noise or shaking caused by a failing motor
• Helps eliminate no-rotation or intermittent-rotation symptoms

• One dryer drive motor assembly

• Disconnect power before servicing to avoid shock or injury
• Verify motor orientation and blower-wheel seating before final assembly
• Inspect and replace worn belts or idler pulleys while unit is open

This water inlet valve controls water flow to the refrigerator's ice maker and dispenser, restoring reliable water delivery when the valve is functioning properly. It replaces a failing inlet valve to stop leaks and restore dispensing and ice filling. What it does:

• Opens and closes to allow water into the ice maker and dispenser when commanded
• Stops water flow to prevent overfilling and leaks when closed
• Commonly found when the dispenser or ice maker won't fill or water flow is weak
• Can leak or drip when the valve diaphragms or seals fail
• Works with the refrigerator's water supply and control signals

• Turn off power and shut off the water supply before starting any repair
• Inspect inlet hoses and fittings for damage; replace damaged hoses to prevent leaks
• Use basic hand tools; avoid overtightening fittings which can cause leaks

This is a replacement lower cabinet base panel that supports the appliance cabinet and restores proper fit and stability. It replaces a cracked, bent, or missing base to help keep the appliance secure and aligned. What it does

• Provides structural support for the appliance cabinet and helps maintain proper clearance with the floor.
• Secures and locates leveling legs and other lower-mount hardware.
• Reduces cabinet flex and helps prevent vibration-related noise.
• Commonly used when the original base is cracked, warped, or severely corroded, or when the cabinet sits unevenly.

• Disconnect power and turn off water before beginning work.
• Remove the kickplate and any lower trim to access mounting fasteners; support the cabinet while removing the old base.
• Handle edges carefully; use proper fasteners and align the base before tightening.

This fastener kit supplies the assorted screws and clips used to secure panels and components on compatible Frigidaire appliances, helping restore proper fit and stop loose or rattling parts. Ideal for repairs where original mounting hardware is missing or damaged. What it does:

• Replaces worn, missing or damaged mounting hardware so panels, brackets and trim stay secure
• Helps eliminate vibration noise and loose-fitting parts that cause rattling
• Restores correct alignment for doors, panels or internal assemblies that use small fasteners
• Provides the specific fasteners needed for the factory-replacement process

• Basic hand tools (screwdrivers, nut drivers) are typically required; refer to your model's service manual for exact fastener locations and torque
• Turn off power and disconnect the appliance before starting any repair to avoid shock or injury
• Handle small parts carefully and keep them away from children and pets

This run capacitor helps the refrigerator's motor start and run more reliably, reducing strain on the compressor and fan. Replacing a failing capacitor can restore normal motor operation and help the appliance cool properly. What it does:

• Provides the electrical phase shift needed for motor start and continuous operation
• Helps reduce motor overheating and hard-start symptoms
• Commonly replaced when motors hum, won't start, or cycle erratically
• Supports steady compressor and fan performance for consistent cooling

• One run capacitor (single unit as pictured)

• Disconnect power to the appliance before inspecting or replacing the capacitor
• Discharge the capacitor safely before handling to avoid shock
• Verify terminal markings and wiring; replace with same type and ratings

This electronic control board manages the refrigerator's core functions and user interface, restoring proper control when the original board fails. Replaces a faulty main board to help return normal temperature and cycle control. What it does:

• Receives input from the control panel and sensors to run compressors, fans and defrost cycles
• Regulates cooling cycles and timing for consistent refrigerator performance
• Restores display and button responsiveness when the control is unresponsive or blank
• Can stop erratic cycling or prevent the unit from powering up when the board is defective

• Disconnect power to the appliance before starting any repair
• Handle the board by its edges and avoid static discharge; use gloves or an anti-static wrist strap if available

This oven temperature sensor detects the internal temperature and sends readings to the range control so the oven can maintain accurate cooking temperatures. Replaces a failed or intermittent sensor to restore reliable temperature control. What it does:

• Senses oven cavity temperature and provides temperature data to the control board
• Helps the control maintain set bake/roast temperatures
• Common symptom: oven temperature is incorrect or fluctuates during cooking
• Common symptom: cook cycles take too long or oven does not reach set temperature
• Common symptom: oven displays a temperature sensor or sensor fault code

• One oven temperature sensor (1 each)

• Disconnect electrical power to the appliance before removing or installing the sensor
• Handle the sensor carefully to avoid damaging the probe or wiring and ensure proper connector seating
• Inspect wiring and connector for damage; replace if frayed or corroded

A handheld replacement remote control that restores convenient, wireless operation of your appliance's basic functions. Use it to power the unit on/off and change settings from across the room without touching the control panel. What it does:

• Sends wireless commands to the appliance to control power, temperature, fan speed, and mode selection.
• Replaces a lost, damaged, or unresponsive remote to regain full remote operation.
• Uses standard batteries.

• Insert fresh batteries before first use and follow the appliance's pairing or sync procedure if required.
• Keep remote dry and avoid dropping; do not attempt to open or service the remote—replace if internal damage is suspected.
• Dispose of batteries properly and remove batteries if storing the remote for extended periods.