Parts for Frigidaire FN38NGDC: 03 - Recommended Spare Parts

Right-side end cap for grill handles. Replaces cracked, broken, or missing caps to restore a finished look and secure grip on your handle assembly.

Small plastic end cap that finishes and secures your grill door handle. Replaces cracked, broken, or missing caps to restore a clean look and secure fit.

If your grill burner won't light or sparks weakly, this electrode spark igniter creates the spark needed for reliable gas ignition. Simple DIY fix.

Replace a grill main burner that won't ignite or has uneven flames. Requires removing grates, heat shields, and screws. Moderate DIY repair project.

Grill flavor grid that sits above the burner to distribute heat and protect components. Replace if cracked, warped, rusted, or missing for proper cooking.

Control knob for grill burner valve operation. Installs on the front control panel. Replace if cracked, broken, loose, or missing for proper valve control.

Replace your grill's hood cover if it's cracked, warped, or damaged. This exterior cover protects internal components and completes the top assembly.

Burners won't light or spark is weak? This ignitor module restores reliable spark generation to ignite gas burners. Straightforward repair.

If your grill has uneven flames or burners won't light properly, the gas manifold may need replacement. This part distributes gas to each burner evenly.

Fix low flame, uneven heating, or burners that won't stay lit with a new gas pressure regulator. Controls gas flow from tank to burners. Basic repair.

This genuine control panel replaces a cracked, damaged or worn console surface to restore the appliance's exterior and support the console controls. It provides a direct fit for models that list this exact part number. What it does

• Serves as the front surface for the appliance control console and provides mounting for buttons, displays or switches
• Replaces cracked, warped or cosmetically damaged panels that expose internal components
• Helps protect electronic controls and wiring from spills and debris
• Restores the factory appearance of the console after impact or wear

• Follow the appliance manufacturer's disassembly steps to access and remove the console; disconnect power before starting
• Handle with care to avoid scratching the finish or damaging attached trim or mounting tabs
• Retain any screws, bezels or clips from the original panel for reuse unless replacement hardware is specified
• If electronic components need transfer, ground yourself and follow static-safety practices

Replace a cracked, worn, or missing grill control knob. Restores safe, accurate temperature selection with reliable grip and clear pointer feedback.

Replacement wire for your grill. Installs in the control or ignition system. Order a new one if your existing wire is frayed, damaged, or broken.

Wire component for grill assembly. Installs in electrical or structural system. Replace if damaged, frayed, disconnected, or missing for safe operation.

This is a replacement glass shelf for refrigerators that restores stable storage space and helps keep food organized. It provides a solid, easy-to-clean surface for storing items and prevents sagging or items falling between compartments. What it does

• Replaces a cracked, chipped or missing shelf to restore usable storage area
• Supports food containers, produce and other refrigerator items on a stable surface
• Reduces spills and makes cleaning simple with a smooth glass surface
• Improves organization by re-establishing proper shelf spacing

• Remove all food and loose parts from the cabinet before installing
• Handle the glass carefully; wear cut-resistant gloves to reduce risk of injury
• Slide into the existing shelf guides or supports until fully seated; do not force or bend supports
• If damaged guides or clips are present, replace them before installing this shelf

If your grill burner won't light or has delayed ignition, this electrode creates the spark needed to ignite gas. Simple DIY fix restores reliable lighting.

Replacement cap for your grill. Installs to cover and protect exposed components. Order a new cap if yours is cracked, broken, or missing.

Grill motor not turning? This rotisserie motor replacement restores smooth rotation for even cooking. Moderate DIY repair, typically 30-45 minutes.

Rotisserie fork for grills. Secures food to the rotisserie spit for even cooking. Replace if bent, broken, or missing to restore rotisserie function.

Replacement hose for your grill. Connects gas supply to burner assembly. Order a new hose if yours is cracked, damaged, or shows signs of wear and leaking.

This replacement elbow is a molded connector that routes and secures flexible tubing for proper water or drain flow, restoring sealed connections and preventing leaks. Easy to swap when the original is cracked or worn. What it does

• Connects and redirects flexible tubing to maintain proper water/drain routing.
• Restores a sealed pathway where a cracked or brittle elbow causes leaks.
• Helps stop slow drainage or water pooling caused by a failed connector.
• Provides a secure fit for tubing to prevent disconnection during normal use.

• One replacement elbow as shown.

• Disconnect power and shut off water supply before beginning any repair.
• Remove surrounding panels as needed to access the elbow; retain screws and clips for reassembly.
• Inspect mating tubing and fittings; replace damaged tubing or use approved clamps for a secure seal.

Replace your grill's gas supply hose. Installs between the fuel source and burner assembly. Order a new hose if yours is cracked, kinked, or worn.

Replacement mounting bolt for grill assembly. Secures components and panels in place. Order a new bolt if yours is stripped, rusted, or missing.

Replacement mounting screw for grills. Secures panels, trim, brackets, and assemblies. Needed when original screw is missing, stripped, or damaged.

Replacement mounting screw for grill assembly. Secures components and panels in place. Order a new screw if original is stripped, missing, or damaged.

Fix intermittent power or component failures with this insulated wire lead. Restores electrical continuity when original wiring is damaged or corroded.

Mounting nut for grill assembly. Secures components and hardware throughout your grill. Replace if stripped, corroded, or missing for proper fit.

Wire harness for grills. Connects electrical components within your grill assembly. Replace if wires are frayed, damaged, or connections are loose.