Parts for Crosley CAE29ERR410A19: Recommended Spare Parts

This refrigerator water filter removes common impurities from the ice and water supply so you get cleaner-tasting water and clearer ice. Designed to fit inline/replaceable filter housings used in many Frigidaire refrigerators. What it does:

• Reduces chlorine taste and odor for improved drinking water flavor
• Helps reduce sediment and particulates that can affect ice clarity
• Keeps water flowing properly when replaced as part of routine maintenance
• Addresses symptoms like cloudy ice, bad-tasting water, or reduced water quality

• One replacement refrigerator water filter cartridge

• Replace filter according to your refrigerator manufacturer's instructions; typically twist or push in to seat and lock
• Run several gallons of water through the dispenser after installation to flush the system and remove loose carbon fines
• If water flow is restricted after installation, check filter orientation and seating; do not force
• For safety, disconnect power to the appliance before accessing internal filter housings

Electronic control board that manages a refrigerator's cooling, defrost and user-interface functions, restoring responsive controls and proper cycling when a failed system control causes erratic operation. What it does

• Regulates compressor, fans and relay switching to manage cooling cycles — failure can cause warm interior or continuous running.
• Controls defrost timing and heater operation to prevent frost buildup and excessive ice.
• Powers and communicates with the display and user controls — faults can cause blank or unresponsive controls.
• Monitors sensor inputs and coordinates system responses to maintain set temperatures.

• Disconnect power to the appliance before servicing to avoid shock or equipment damage.
• Handle the board by its edges and avoid static discharge — use anti-static precautions if available.
• Secure all connectors and mounting hardware, then power up and confirm normal operation and proper temperature cycling.

This replacement wire provides a single insulated conductor used to reconnect or repair electrical connections inside the appliance, restoring reliable signal or power flow to the affected component. What it does

• Re-establishes an electrical connection between components when an original wire is damaged or disconnected
• Helps resolve symptoms such as intermittent operation, no power to a circuit, or a loose connection in the appliance
• Prevents arcing and poor contact when a worn or frayed wire is replaced
• Used as a direct inline conductor where the OEM wiring is faulty

• One replacement insulated wire

• Disconnect power to the appliance before starting any repair to avoid shock or injury
• Match wire routing and terminal orientation to the original; secure with existing clips or ties to prevent chafing
• Ensure proper connector seating and no exposed conductor is left exposed after installation
• If multiple wires or a full harness are damaged, replace the entire harness per manufacturer guidance

This refrigerator door handle provides a stable grip for opening and closing the door and restores the door's original appearance and function. Designed as a direct-fit replacement where this OEM-style handle is specified. What it does

• Replaces a damaged, cracked, or loose refrigerator door handle to restore safe, reliable opening and closing.
• Provides a secure grip and proper alignment for the door during normal use.
• Helps prevent further wear to the door edge and surrounding trim by restoring correct handle function.
• Compatible with factory handle mounting points when the OEM part number matches.

• One refrigerator door handle

• Installation typically requires removing the old handle screws or clips and securing the replacement in the same mounting locations.
• Use appropriate hand tools; avoid overtightening fasteners which can crack the handle or strip threads.
• Keep the door supported during removal/installation to avoid hinge or door damage.
• Turn off power to any nearby components (ice maker lights, etc.) before working.

A direct-replacement power cord that restores electrical connection to compatible Frigidaire appliances. Simple swap-in part to replace a damaged or worn cord so your appliance can receive power safely. What it does:

• Provides the electrical connection between the appliance and the wall outlet.
• Replaces frayed, cut, or damaged cords that cause intermittent power or unsafe operation.
• Helps restore normal appliance operation when a failed cord is the source of a power issue.
• Designed to match the OEM fit and connections for the specified part number.

• One replacement power cord.

• Disconnect power at the breaker or unplug the appliance before beginning any work.
• Follow the manufacturer's wiring diagram when connecting.
• Use only compatible screws/connectors and route the cord as the original to avoid pinch or abrasion.

The Thermistor is an OEM replacement part for Frigidaire room air conditioners. Located within the air conditioner unit, the thermistor accurately monitors and regulates the equipment's internal air temperature. Precisely calibrated at the factory, the thermistor allows the unit to continuously achieve and maintain the preset cooling level preferred by the user. 

Symptoms of a bad thermistor include:  

• Inconsistent or fluctuating room temperatures
• Difficulty reaching or maintaining desired temperatures  
• The control panel shows abnormal temperature readings

Causes can be age-related deterioration of sensing components, moisture exposure damaging circuitry, or loose wiring connections preventing exact temperature measurement over time. This OEM thermistor restores precise temperature control.

Replacing a faulty thermistor prevents improper compressor cycling which wastes energy. Compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This oven temperature sensor detects the internal temperature and sends readings to the range control so the oven can maintain accurate cooking temperatures. Replaces a failed or intermittent sensor to restore reliable temperature control. What it does:

• Senses oven cavity temperature and provides temperature data to the control board
• Helps the control maintain set bake/roast temperatures
• Common symptom: oven temperature is incorrect or fluctuates during cooking
• Common symptom: cook cycles take too long or oven does not reach set temperature
• Common symptom: oven displays a temperature sensor or sensor fault code

• One oven temperature sensor (1 each)

• Disconnect electrical power to the appliance before removing or installing the sensor
• Handle the sensor carefully to avoid damaging the probe or wiring and ensure proper connector seating
• Inspect wiring and connector for damage; replace if frayed or corroded

This replacement capacitor stores and releases electrical energy to support proper operation of the appliance's circuit. Replacing a weakened or failed capacitor restores reliable startup and smooth performance in the affected component.

• Stores electrical energy and delivers a brief boost during startup as designed by the circuit
• Helps stabilize operation, reducing humming, stalling, or overheating from a weak capacitor
• Common signs include motors that hum but won't start, intermittent operation, breaker trips
• Visual clues of failure: swollen case, leaking oil, or burnt odor

• Disconnect power and verify no voltage is present before servicing
• Properly discharge the old capacitor using safe, approved procedures
• Note wire positions or take a photo; transfer leads to the matching terminals securely
• Mount securely in the existing bracket/strap; keep terminals clear of contact and test operation

This mounting strap secures internal components and wiring inside the appliance, helping prevent movement and vibration that can cause noise or wear. It's a simple replacement to restore proper component retention and quiet operation. What it does:

• Fastens and stabilizes wires, hoses or small assemblies to the cabinet or frame
• Helps prevent chafing, rubbing or vibration-related noise from loose parts
• Stops minor movement that can lead to connector strain or intermittent electrical contact
• Useful when original strap is cracked, stretched, or broken

• One mounting/retainer strap

• Disconnect power to the appliance before beginning any work
• Verify strap orientation and attachment points match the original before fastening
• Use the original screws/clips or manufacturer-recommended hardware; do not overtighten
• If routing wires or hoses, ensure no pinch points and secure so lines are not under tension

This scroll is the replaceable spiral element used inside a refrigeration compressor to compress refrigerant and restore proper cooling performance. It's the OEM-design component that engages with the mating scroll to form the compression chambers. What it does:

• Forms the moving or stationary spiral surface in a scroll-type compressor to compress refrigerant
• Restores internal compression when the factory scroll is damaged or worn
• Can help resolve symptoms such as loss of cooling, excessive compressor noise, or failed compression when diagnosis confirms scroll damage
• Works only as part of a compatible scroll compressor assembly; not a standalone drop-in pump solution

• Replacement requires compressor disassembly and reassembly
• Follow OEM torque, alignment, and sealant procedures; improper installation can cause compressor failure
• Observe all safety precautions for handling pressurized refrigerant and electrical components

This blower wheel moves air through the dryer cabinet so clothes dry efficiently and the appliance vents properly. Replacing a worn or damaged wheel restores airflow and helps prevent overheating and long dry times. What it does:

• Spins on the blower motor shaft to draw air across the heating element and through the drum
• Restores proper airflow when a chipped or bent wheel causes reduced drying performance
• Reduces rattling or vibration caused by imbalanced or cracked fins
• Helps prevent overheating and extended cycle times due to restricted airflow

• One blower wheel

• Disconnect power (and gas if applicable) before servicing to avoid electric shock or injury
• May require removal of the dryer front or blower housing and loosening the motor to slide the wheel onto the shaft
• Ensure the wheel is oriented and seated correctly on the motor shaft and that set screws or clips are tightened as required
• Inspect motor shaft and housing for debris; spin the new wheel by hand to ensure free rotation before reassembly

This replacement blade fan moves cold air across the evaporator to help maintain even temperatures inside the compartment. It restores proper airflow for more consistent cooling and helps reduce frost buildup when working with a good motor. What it does:

• Circulates air across the evaporator to distribute cold air through the compartment
• Restores airflow when a cracked, warped, or missing blade reduces cooling efficiency
• Helps reduce uneven temperatures and localized warm spots caused by poor airflow
• Can reduce abnormal noises caused by damaged or unbalanced blades

• One replacement blade fan

• Disconnect power to the appliance before starting any repair
• Remove the evaporator cover/panel to access the fan assembly per your model's service instructions
• Handle the replacement blade carefully to avoid bending the blades or contaminating the evaporator
• If the fan motor or mounting hardware is damaged, replace those parts as well for reliable operation