Parts for Kenmore 253.17812710 (25317812710, 253 17812710): Recommended Spare Parts

This is a replacement interior light bulb designed to restore illumination inside your refrigerator so you can easily find food and check contents. Fits standard refrigerator interior light sockets and replaces burned-out bulbs. What it does:

• Provides interior lighting so shelves and compartments are visible.
• Replaces a bulb that is burned out, dim, or flickering.
• Helps identify spoiled food and improves visibility when loading or unloading.
• Designed to work with compatible refrigerator light sockets.

• Disconnect power or unplug the appliance before replacing the bulb.
• Allow the old bulb to cool before touching or removing.
• Handle the new bulb carefully; avoid excessive force when seating into the socket.

A small neon indicator lamp that lights the control panel to show power or an active function. Replaces a worn or burned-out indicator so the panel status is visible at a glance. What it does:

• Provides a visible indicator light for control panels and switches
• Lights when the circuit is energized to show power or function status
• Commonly used in ovens, cooktops, and ranges with neon-style panel indicators
• Can restore visibility when the original lamp is dim or nonfunctional

• One indicator neon lamp

• Designed for simple replacement; disconnect power before servicing
• Remove the control panel or bezel to access the lamp socket as needed
• Handle the lamp carefully to avoid breakage; dispose of broken glass safely

This replacement refrigerator door handle restores a secure grip for opening and closing the fridge. It fits the factory mounting locations to return normal door operation and appearance. What it does:

• Replaces a cracked, loose, or broken door handle for safe everyday use
• Provides a solid grip so the door opens and closes smoothly
• Restores the cabinet appearance when the original handle is worn or damaged
• Helps prevent direct stress on the door shell that can lead to further damage

• Designed to mount using the refrigerator's original attachment points and hardware; reuse existing screws unless new hardware is specified
• Turn power off to the appliance or unplug if required to access the handle area safely
• Handle installation may require removing a trim panel or door liner—keep small parts organized

The Gasket is an OEM part for Frigidaire freezers that creates an airtight seal between the freezer lid and the main body of the freezer, ensuring insulation and temperature retention. It helps prevent warm air from entering the freezer and cold air from escaping, maintaining the desired temperature and preserving the freshness of your frozen goods.

A bad gasket can be caused by wear and tear over time, damage from improper handling, or exposure to extreme temperatures. Signs of a faulty gasket include frost buildup inside the freezer, increased energy consumption, or difficulty in maintaining the desired temperature.

Symptoms of a bad gasket include:

• Frost buildup inside the freezer
• Increased energy consumption  
• Difficulty in maintaining the desired temperature

Replace your worn-out or damaged gasket with this genuine OEM Frigidaire part to restore your freezer. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

This genuine replacement lock key restores access to your appliance's built-in lock. Replace a lost or damaged key so you can lock or unlock the door or lid as designed. What it does:

• Engages the factory lock cylinder to lock or unlock the door/lid
• Helps restore security when the original key is missing or damaged
• Common symptoms: cannot lock or unlock, key won't insert/turn, need a spare
• The lock cylinder may be worn or misaligned

• One replacement key

• Typically tool-free: insert the key fully and turn gently—do not force
• If servicing or replacing the lock cylinder, disconnect power to the appliance
• Store the new key securely away from the unit to prevent loss

The Basket is an OEM component for Frigidaire freezers. Positioned in the freezer compartment, this removable shelf provides storage for frozen fruits, vegetables, and more. 

Causes of a bad basket freezer can include wear and tear over time, or damage to the plastic material from excessive loads. 

Symptoms of a bad basket include:

• Cracks or breaks in the plastic that compromise the structure
• Difficulty removing or replacing the shelf 
• Warping preventing a stable storage surface

Compatible with Electrolux and some Gibson models as well. Convenient freezing and optimized layouts resume with the installation of this durable OEM shelf.
 

This is a genuine replacement mounting screw that secures appliance panels and components to restore stable fit and prevent rattling or loose parts. A simple, direct fix for hardware that has come loose or gone missing. What it does:

• Secures panels, trim, brackets, or components to maintain proper alignment and prevent movement
• Stops rattling or vibration caused by loose hardware
• Supports safe operation by keeping covers and guards fastened
• Used where the original mounting screw has worn, corroded, or been lost

• One mounting screw

• Turn off power to the appliance and unplug before servicing to avoid injury
• Use the correct screwdriver or driver bit to avoid stripping the head
• Replace only like-for-like;
• If you encounter damaged threads or stripped holes,

This replacement cover protects the appliance's top/control area and restores a finished appearance. It prevents debris and splashes from reaching internal components and helps keep the console area secure and neat. What it does

• Shields control and top-panel components from dust, grease and spills
• Helps stop light rattling or vibration caused by a broken or loose top cover
• Restores a smooth, finished exterior where the original cover was cracked, bent or missing
• Keeps internal wiring and connections out of reach for improved safety during normal use

• One replacement cover

• Disconnect power to the appliance before starting any repair
• Handle edges carefully; covers may have sharp metal or plastic edges
• Install with original fasteners or OEM-replacement screws; follow console alignment when seating the cover

The Temperature Control Thermostat is an OEM part for Frigidaire upright and chest freezers. Located within the freezer compartment, it accurately monitors and regulates interior temperatures. 

Symptoms of a faulty thermostat involve:

• Improper or inconsistent freezing leading to melting or frost buildup
• The compressor continues to run even when the target temperature is reached  
• Thermal runaway causing dangerously low freezer temperatures

Causes can be a gradual loss of calibration from years of thermal cycling, moisture corroding electrical connections, or failed temperature regulation due to worn components.

This OEM Frigidaire replacement part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore upright and chest freezer models. 

This compressor overload protects the refrigerator compressor from electrical damage by cutting power if the motor draws excessive current. Replaces a failed overload to help restore normal compressor starting and protect the compressor from burn-out. What it does:

• Senses excessive current and interrupts power to prevent compressor overheating or damage
• Helps stop a humming or non-starting compressor caused by overload failure
• Works with the compressor start relay/capacitor system to allow proper motor start
• A failed overload can cause intermittent running, frequent restarts, or no cooling

• One compressor overload device (quantity: 1)

• Disconnect power to the appliance before accessing the compressor or electrical terminals
• Handle terminals carefully and match connector orientation when installing; secure terminal fit is required
• Do not attempt repairs unless you are comfortable with electrical components; wear safety gear and follow local codes

This capacitor stores and releases electrical energy to help a motor or compressor start and run smoothly. Replacing a weak or failed capacitor can restore proper startup, reduce humming, and improve overall cooling performance.

• Provides the phase shift and torque boost needed for AC motors to start
• Stabilizes motor operation during run for consistent performance
• Common symptoms of failure: motor/compressor hums but won't start, intermittent starting, reduced cooling/airflow
• Visual clues include a swollen/bulging top or leaking oil residue
• Contribute to breaker trips or overheating when degraded

• Disconnect power and safely discharge the old capacitor before handling
• Photograph wiring and transfer leads to the matching terminals on the new capacitor; match microfarad (µF) and voltage ratings to the original
• Mount securely; avoid contact with sharp edges or moving parts
• Check the motor/compressor and wiring for additional faults

This starter is the compressor start relay that briefly powers the start winding to get the compressor turning. Replacing a weak or failed starter can restore reliable compressor startup and consistent cooling performance.

• Engages the compressor's start winding at power-up, then disengages as the motor reaches speed
• Helps prevent repeated clicking, stalling, and overheating at the compressor
• Common symptoms include no cooling while fans run, compressor hums or clicks but won't start, or short-cycles on the overload
• Physical signs may include heat damage or a burnt odor on the original start device

• Disconnect power and allow the compressor to cool before service
• Discharge any capacitors per manufacturer instructions
• Note wire positions and terminal orientation; transfer leads one at a time
• Push the relay fully onto the compressor pins; ensure a secure fit without bending terminals

The Chest Freezer Door Hinge is an OEM part for Frigidaire chest freezers. It provides the pivot point and motion needed for the chest freezer door to swing open easily while securely remaining attached. The hinge allows convenient access to frozen food storage.

Causes of a bad chest freezer door hinge include wear and tear from repeated opening and closing of the heavy door over many years, exposure to cold temperatures that can cause damage at the hinge point, or accidental impact.

Symptoms of a bad hinge include:

• The door becoming detached from the freezer
• Restricted or impaired movement of the door
• Excessive play, loosening, or instability in the door
• Difficulty opening and closing the freezer

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This caster is the cabinet roller that helps your appliance glide smoothly when moving for cleaning or service. It restores easier sliding and stable support at the appliance base. What it does:

• Replaces a worn or damaged roller that makes the appliance hard to move
• Restores smooth rolling and helps prevent catching or scraping
• Reduces wobble or uneven movement caused by a broken caster
• Helps protect flooring by maintaining proper alignment of the appliance base

• Unplug the appliance and remove contents or secure shelves before beginning
• Support the appliance safely (use a second person or proper stands) before removing/remove load-bearing panels
• Install with the original fasteners; tighten securely but avoid over-torquing
• If movement issues persist after replacement, check adjacent rollers and mounting hardware