Parts for Kenmore 795.79433210 (79579433210, 795 79433210): Refrigerator Parats Parts

The Shelf Assembly is an OEM component for LG refrigerators. It comprises adjustable glass shelves that fit inside the refrigerator and freezer compartments. These shelves provide flexible storage and organization options for various food items. 

Causes of a bad shelf assembly can include cracks or chips in the glass that compromise the structural integrity. Overloading shelves beyond their weight limit can also lead to damage over time. 

Symptoms of a bad shelf assembly include:

• Sagging or bowing shelves unable to hold weight 
• Shelves breaking or snapping at their mounting points
• Missing anti-tip brackets or rail clips

This OEM LG shelf assembly is compatible with many Sears/Kenmore side-by-side refrigerators as well as select GE, Samsung, and Frigidaire refrigerators.

The Shelf Assembly is an OEM part for LG refrigerators. This part offers support and optimal organization for your refrigerated items. This part maximizes the storage capacity of your refrigerator, providing a stable platform for food and beverages.  

Causes for issues with the shelf assembly often involve overloading the shelf beyond its weight capacity, accidental damage from dropping heavy items, or material fatigue from years of use.

Symptoms of a malfunctioning Shelf Assembly include:

• Cracks or breaks in the shelf that compromise its structural integrity
• Difficulty fitting the shelf properly into its designated slots
• Warping or bending under weight, indicating a loss of strength

This OEM LG part is also compatible with some Kenmore models.

This small control knob mounts on the shutter mechanism so you can open, close, or fine-tune the setting with a simple turn. Replace a cracked, loose, or missing knob to restore smooth adjustment and a clean, finished look.

• Attaches to the shutter/damper shaft to select positions
• Provides a secure grip for easy, precise adjustment
• Common failure signs: cracked or stripped hub, loose fit, missing knob
• May cause difficulty adjusting the shutter or settings to slip

• Disconnect power if removing any covers or panels near electrical components
• Pull the old knob straight off; rock gently if stuck to avoid damaging the shaft
• Align the keyed/D-flat opening with the shaft and press firmly until fully seated
• The shutter moves smoothly through its full range

This shutter knob attaches to the crisper cover's humidity vent (shutter) and lets you open or close the airflow for produce storage. Replace a cracked or missing knob to restore smooth, precise adjustment of the drawer's vent. What it does:

• Connects to the shutter lever to adjust the vent position on the drawer cover
• Restores the ability to regulate airflow and moisture in the crisper
• Helps ensure the vent moves and stays in the selected setting
• Symptoms may include a broken or missing knob, a vent stuck in one position, or inability to adjust humidity

• 1 shutter knob

• Unplug the refrigerator before servicing; remove the crisper/drawer cover for access if needed
• Pull the old knob straight off the shutter shaft; align flats/tabs and press the new knob on until fully seated
• Do not force the knob—inspect the shutter lever for damage if it won't engage
• Verify smooth vent movement, then reassemble the cover and drawers

The Vegetable Tray is an OEM part for LG refrigerators. This part provides a designated space within the refrigerator to store fresh vegetables, keeping them organized and easily accessible.

Causes of a bad vegetable tray can stem from excessive force when opening and closing the drawer, moisture buildup causing swelling or deterioration of the plastic material, or general aging and brittleness over time.

Symptoms of a bad vegetable tray include:

• Cracking or breakage due to wear and tear
• Warping or discoloration from exposure to moisture and temperature changes
• Difficulty sliding the tray in and out due to damage or misalignment

This OEM LG part is also compatible with some Kenmore models.

This cover assembly replaces a damaged or missing cover panel in the designated location of your appliance. It restores proper protection and fit, helping shield components and maintain intended airflow where the original cover has cracked or loosened.

• Protects internal components and wiring from dust, moisture, and accidental contact
• Maintains manufacturer-designed airflow/venting through the cover area
• Restores secure mounting and a clean, finished appearance
• Typical symptoms: cracked or broken cover, missing tabs, loose or rattling panel, or airflow obstruction at the cover location

• Disconnect power to the appliance before servicing
• Remove retaining screws/clips and keep hardware for reuse
• Transfer any clips, seals, or sensors from the original cover if applicable; seat the new cover fully
• Tighten fasteners snugly without overtightening to avoid cracking plastic; ensure vents are unobstructed and the panel is secure

This supporter is a small mounting support used to secure and stabilize internal components, helping keep parts aligned and reducing vibration for quieter, more reliable operation. It restores proper fit where worn or damaged supports cause movement. What it does

• Holds and stabilizes a specific internal component or assembly to maintain proper alignment
• Reduces vibration and rattling caused by loose or broken supports
• Helps prevent wear from parts rubbing or shifting out of place
• Common symptoms it can address: unusual noise, wobble, or component misalignment

• One supporter mounting support

• Disconnect power to the appliance before beginning any work
• Access may require removing panels or assemblies—keep track of fasteners
• Inspect surrounding clips and fasteners and replace any that are damaged

This cover support bracket secures an appliance cover or panel, restoring proper alignment and stability. Replacing a damaged support helps eliminate rattles and gaps so the cover seats correctly and stays in place.

• Provides structural support for the associated cover/panel
• Keeps the cover aligned and firmly seated against the cabinet
• Replaces a cracked, stripped, or missing support
• Symptoms include a loose or sagging cover, vibration/rattling noises, or covers that won't stay attached

• Disconnect power before servicing; allow any hot surfaces to cool and wear cut-resistant gloves
• Remove the cover/panel to access the support and retain all mounting hardware
• Install the new support, transferring screws or clips as needed
• Reinstall the cover and verify proper fit before restoring power

This tempered-style glass shelf replaces a cracked, broken, or missing refrigerator shelf to restore usable storage and keep food organized on a stable, easy-to-clean surface. Fits into existing shelf rails and supports everyday items. What it does:

• Provides a flat storage surface for containers, produce, and packaged food
• Restores lost storage space and helps prevent items from falling through broken shelving
• Helps contain small spills for easier cleanup
• Slides into existing shelf supports—serves the same function as the original glass shelf

• Remove food and sliding bins from the shelf area before installing
• Handle with care—wear gloves and eye protection when moving glass
• Align edges with the refrigerator shelf rails and slide straight in until fully seated
• If glass is damaged or cracked, discard safely and clean any debris before installing the replacement

The Glass Shelf is an OEM part for LG refrigerators. This shelf is designed to provide a sturdy and reliable surface for storing food and beverages within the refrigerator.  

Causes of a bad glass shelf can include cracks or shattering due to heavy loads, accidental impact, or thermal stress from temperature changes within the refrigerator.

Symptoms of a bad glass shelf include:

• Visible cracks or chips in the glass
• The shelf not fitting properly or becoming unstable
• Difficulty in sliding or adjusting the shelf
• Items tipping or falling over due to an uneven surface

This OEM LG part is also compatible with some Kenmore models.

This replacement Fresh Room tray restores the shallow bin area inside your refrigerator's Fresh Room compartment, giving you a sturdy spot to organize deli items and snacks. Replace a cracked or missing tray to maintain proper fit and daily convenience.

• Forms the Fresh Room compartment tray that holds small items like meats and cheeses
• Helps keep contents organized and supported under the existing cover/shelf
• Restores proper seating and alignment within the compartment
• Common signs you need this part: cracked plastic, broken tabs/edges, tray won't seat, falls out, or is missing

• Empty the compartment and remove the old tray by lifting/tilting as your model allows
• Align the new tray with the existing guide tabs/rails and slide or press it fully into place
• Handle plastic parts carefully; avoid forcing or flexing to prevent damage
• If removing shelves or lighted covers near the work area, disconnect power for safety