Parts for Kenmore 795.71052014 (79571052014, 795 71052014): Refrigerator Parts

The Water Filter is an OEM replacement part for LG refrigerators. It is designed to remove impurities, contaminants, and unwanted particles from the water supply, ensuring that the water dispensed and used for ice making is clean and fresh.

Symptoms of a need to replace the water filter:

• Unpleasant taste or odor in the water or ice
• Decreased water flow from the dispenser
• Discoloration or sediment visible in the dispensed water

Causes of a faulty water filter can include general usage over time, exposure to high levels of contaminants in the water supply, or physical damage or clogging of the filter media.

This OEM LG part is also compatible with some Kenmore refrigerator models.

The Glass Shelf is an OEM part for LG refrigerators. It provides a durable surface for organizing and displaying items inside the refrigerator and freezer compartments.

Causes of a faulty shelf can include chips or cracks developing from repeated loading and unloading of items over time. Temperature fluctuations may also cause warping.

Symptoms of a problematic glass shelf include:

• Sagging or bowing that prevents proper fitting
• Breaks or weak spots that compromise strength
• Difficulty removing or replacing the shelf

This OEM LG part is also compatible with some Kenmore models.

Note: Right Side Drawer

Note: Left Side Drawer

This TV cover assembly replaces a damaged or missing rear cabinet panel to restore the set's enclosure and protect internal components. It helps maintain proper airflow and keeps circuitry and wiring shielded from dust and impact. What it does:

• Replaces a cracked, dented, or warped rear TV cabinet panel
• Protects internal electronics, boards, and wiring from dust and accidental contact
• Helps maintain proper ventilation pathways and chassis alignment
• Restores cosmetic appearance of the TV's rear housing

• One TV cover assembly

• Refer to the TV's service manual for disassembly/reassembly instructions and correct screw locations
• Power off and unplug the TV before beginning any repair; allow components to discharge
• Handle internal components and the cover carefully to avoid damage to boards, cables, and connectors

This guide assembly is a chassis alignment and support piece that helps hold and position internal TV components for proper fit and operation. Replacing a damaged guide restores secure mounting and reduces panel or board movement. What it does:

• Secures and aligns internal TV modules or boards to the cabinet
• Prevents rubbing, vibration noise, and intermittent contact from loose parts
• Helps keep the display and internal assemblies correctly spaced for reliable operation
• Useful when cracked, warped, or broken guides cause misalignment or rattling

• One guide assembly as shown

• Unplug the TV and remove power/antenna cables before starting
• Ground yourself to protect against static-sensitive components
• Use original screws and fasteners; inspect adjacent tabs and mounts for damage during installation

This rail guide assembly replaces a worn or broken slide rail that supports smooth movement of a drawer or component. Restores proper alignment and helps the drawer glide quietly and evenly. What it does:

• Guides and supports the drawer or sliding component along its track.
• Replaces damaged or bent rail sections that cause sticking or uneven movement.
• Reduces scraping, grinding, or noisy operation from a faulty guide.
• Helps restore proper alignment to prevent binding or partial closure.

• One rail guide assembly.

• Disconnect power (and water if applicable) and follow appliance-specific disassembly steps before replacing the rail.
• Basic hand tools are typically required; avoid forcing components to prevent breakage.
• Keep fasteners and any removed parts organized for reassembly.

This guide assembly is a factory-style mounting guide used in TV chassis to position and support internal components, helping maintain correct alignment and stable operation during use and service. What it does:

• Provides a mounting and alignment point for internal TV components to keep assemblies stable
• Helps maintain proper spacing between parts to prevent rubbing, misalignment, or rattling noises
• Can restore correct fit where a damaged or worn guide causes loose panels or shifting components
• Useful when repairing or replacing adjacent parts that rely on the guide for proper positioning

• Guide assembly

• Disconnect power and remove the TV from its wall mount or stand before servicing
• Handle the panel and internal boards carefully to avoid damage; use non-marring tools
• Keep track of all screws and grounding hardware removed during disassembly for reassembly

This rail guide assembly restores smooth, reliable drawer movement by guiding and supporting the slide rail. Replaces a worn or broken guide so freezer/refrigerator drawers open and close without sticking or falling off track. What it does

• Guides the drawer slide rail and keeps the drawer aligned during operation
• Helps stop drawers from binding, sticking, or coming off the rail
• Reduces scraping, grinding, or noisy sliding caused by damaged guides
• Restores proper drawer support so contents remain stable while opening and closing

• Disconnect power before working inside the appliance and remove food, drawers and shelves that block access.
• Remove the old guide and install the new guide using the original mounting screws; match the correct side/orientation before fastening.
• Use common hand tools; avoid forcing parts—if the rail is bent or damaged, replace the rail as well.