Parts for Kenmore 795.79432218 (79579432218, 795 79432218): Refrigerator Parts

This customized screw secures internal or external appliance components to restore proper fit and reduce movement. Use it to replace missing or damaged fasteners so panels and assemblies stay firmly attached during normal operation. What it does:

• Fastens panels, brackets, or small assemblies to maintain structural stability
• Prevents rattling, vibration noise, or loose trim caused by missing screws
• Restores correct alignment where a stripped or damaged screw allowed movement
• Works as a direct replacement for the matching screw specified for the repair

• One screw

• Disconnect power and water supply before starting any repair
• Use the correct screwdriver or bit to avoid stripping the head
• Tighten securely but do not overtighten to prevent thread damage
• Keep small parts away from children and retain any removed hardware for reuse if needed

This door gasket creates an airtight seal between the refrigerator door and cabinet to keep cold air in and humid air out. Replacing a worn gasket helps restore proper temperatures, reduce frost and condensation, and improve efficiency. What it does:

• Seals the door perimeter to prevent air leaks
• Helps maintain stable interior temperature and humidity
• Reduces frost, moisture, and icing near the door opening
• Common signs of failure: tears, cracks, warping, gasket won't stay seated, door not closing fully, condensation or frost along the gasket

• 1 door gasket

• Unplug the appliance before servicing
• Let the new gasket warm and relax (room temp or warm water) to remove folds
• Remove the old gasket from the retainer/channel; install the new one starting at the corners and working evenly around
• If your model uses retainer screws, loosen to remove/seat the gasket and retighten snugly—do not overtighten
• Use low heat (hair dryer) to gently smooth waves; verify seal all around (paper-slip test) and adjust hinges/leveling if needed

This is a door basket for refrigerators. The purpose of a door basket is for additional storage and organizing within refrigerators unit. These are manufactured out of a clear plastic material. These door baskets are very easy to replace and simply slide in and out of the fridge. The entire replacement process takes less than 15 minutes to complete.A new door basket may be needed if the original is cracked, broken, or damaged in any way. Over time, the clear plastic may begin to get brittle after being in cold temperatures. If the clear plastic begins to discolor, the user may wish to replace the door basket for cosmetic purposes.This door basket is a genuine OEM LG part. It is sold individually. This specific door basket is compatible with refrigerators that are manufactured by the LG brand and the Kenmore brand.

This refrigerator guide aligns and supports a mating component so it travels smoothly and stays on track. Replacing a cracked or missing guide restores proper movement and helps prevent binding, jamming, or premature wear.

• Guides and stabilizes the movement of the associated part to ensure smooth travel
• Keeps components aligned to prevent rubbing, derailment, or gaps
• Common signs of failure: sticking or binding, wobbling/misalignment, or parts coming off track
• Visible damage such as cracks, broken tabs, or missing pieces on the guide

• Disconnect power; if working near a dispenser or water path, turn off the water supply
• Remove the access panel/bin as needed and retain any screws/clips
• Seat the new guide and reuse existing hardware; verify a secure fit
• Restore power and test the component's movement for smooth operation

The Door Stopper is an OEM part for LG refrigerators. It is a component located at the top of the refrigerator door frame. The stopper functions to securely cushion the door in the open position, preventing damage from accidental closing. 

Causes of a faulty stopper include wear from the door repeatedly contacting the part during normal use. Forceful door incidents could also bend or loosen the stopper over time.

Symptoms of a problematic door stopper are:

• The door not staying firmly in the open position
• Increased noise or vibration from the door while open
• Potential damage from an unrestrained door closing

This OEM LG part is also compatible with some Kenmore models.

This small stopper fits inside the handle assembly to limit travel and keep the handle properly seated. Replacing a worn or missing stopper restores a solid, secure feel when opening and closing your appliance.

• Provides a positive stop for handle movement
• Helps keep the handle aligned and seated against its mounts
• Replaces a cracked, deformed, or missing stopper
• Common signs: handle feels loose or wobbly, over-rotates, or shifts/clicks during use

• Unplug the appliance before servicing to prevent injury
• Support the handle and protect the finish while removing fasteners
• Note the original stopper's orientation and install the new one the same way
• Tighten fasteners evenly; do not overtighten to avoid damaging plastic or finishes

Door gasket assembly forms the airtight seal around a refrigerator or freezer door to keep cold air in and moisture out. Replacing a worn or damaged gasket restores proper sealing and helps prevent frost and leaks. What it does:

• Seals the door perimeter to maintain internal temperature and reduce warm-air intrusion.
• Prevents moisture and condensation that can lead to frost buildup and water pooling.
• Common symptoms: visible cracks or tears in the gasket, gaps when the door is closed, excess frost or higher-than-normal interior temperature.
• Helps the appliance run more efficiently by restoring an effective door seal.

• Disconnect power to the appliance before starting any repair.
• Clean and dry the gasket seating surface before installing the new gasket.
• Press the gasket evenly into the door channel, starting at the corners and working around the perimeter.
• Check for uniform contact around the full seal after installation; adjust door alignment if necessary.

The Door Basket is an OEM accessory specifically designed for LG refrigerator doors containing vegetable drawers. This hanging basket provides auxiliary storage directly above crisper bins.

Causes of a bad door basket can include wear and tear over time compromising the mesh material, or damage from overloading reducing structural integrity.  

Symptoms of a bad door basket include:

• Holes or tears reducing usable capacity   
• Detached fasteners slipping off mounting brackets
• Warped contours no longer remain properly installed
• Insecure attachment inhibiting safe door openings  

Replace yours today with this genuine OEM LG basket to maximize organizational convenience. Sturdy brackets produce a snug, stable fit. Compatible with Samsung, GE, and Frigidaire refrigerators featuring dual-drawer doors, this upgrade complements any modern kitchen setup. Reliable performance preserves aesthetic appeal.

The Door Basket is an OEM part for LG refrigerators. It is a convenient storage solution located on the door, designed to hold smaller items such as condiments, bottles, or jars. This basket allows for easy access and organization, making it simpler to find and retrieve items stored within the door.

Causes of a bad part can include repeated impact or mishandling, exposure to excessive weight or force, or general wear and tear over time.

Symptoms of a bad Door Basket include:

• Cracks or damage to the basket itself
• Difficulty sliding the basket in and out of the door
• The basket becoming detached or falling out of the door
• Excessive wear or loosening of the mounting hardware

This OEM LG part is also compatible with some Kenmore models.

The Door Basket is an OEM replacement part for LG refrigerators. It hangs inside the refrigerator door and provides organization for condiments, eggs, and other small items that need quick access. The door basket measures approximately 27" x 5" x 5".

Causes of a bad door basket can include broken or damaged wires from overloading or repeated impact within the refrigerator door. The organizing bins or supports inside may also become misshapen over time.

Symptoms of a bad door basket include:

• Items inside are no longer being contained and falling out
• Difficulty seeing contents due to partial collapse of the basket structure

This LG replacement is also compatible with Kenmore models that use LG components. 

This handle assembly replaces a damaged or worn refrigerator door handle to restore safe, reliable grip and smooth door operation. It provides a direct-fit replacement to help you open and close the door securely. What it does:

• Replaces a cracked, broken, loose, or missing refrigerator door handle
• Restores a solid grip and proper leverage for opening and closing the door
• Helps prevent further damage to the door trim from makeshift handles
• Supports correct door alignment and user control during normal use

• Use basic hand tools; avoid overtightening fasteners to prevent damage
• If accessing electrical components, unplug the appliance or turn off power at the breaker before beginning
• Keep removed fasteners and parts in a safe place for reassembly

This snap-in hole plug button covers unused panel openings to restore a finished look and help keep out dust and moisture. A simple cosmetic trim piece that snaps into place and blends with the control panel. What it does:

• Covers exposed holes in control panels and consoles to improve appearance
• Helps block dust, lint and small debris from entering appliance openings
• Prevents accidental contact with internal components through unused holes
• Useful when replacing damaged buttons or finishing a repair

• One snap-in hole plug button

• Disconnect power to the appliance before working on the control panel
• Press the plug into the hole until it snaps flush; use a flat tool gently if needed
• Inspect fit and panel edge for damage; replace if cracked or loose to ensure a secure fit
• If panel removal is required, follow manufacturer instructions to avoid breaking clips

The Hinge Bushing is an OEM part for LG refrigerators. It serves as a crucial component in the door hinge mechanism, ensuring smooth and stable operation when opening and closing the refrigerator door.

You should replace this hinge bushing if it becomes worn out or damaged. Common causes of a bad hinge bushing include constant use leading to wear and tear, misalignment of the door, or physical damage due to impact.

Symptoms of a bad hinge bushing include:

• Difficulty in opening or closing the door
• The door sagging or not aligning properly
• Unusual noises like squeaking or grinding when the door is moved

This OEM LG part is also compatible with Sears/Kenmore.