Parts for Kenmore 106.51164210 (10651164210, 106 51164210): Refrigerator Shelf Parts

The FreshFlow Refrigerator Air Filter is an OEM component for Whirlpool and Maytag refrigerators. Located inside the ventilation system, this filter purifies circulated air. This air filter is 3" wide by 2" high and white in color. It should be replaced every 6 months to ensure the best performance.

Causes of failure relate to clogging from trapped dust, dander and other allergens despite regular replacement intervals. Performance decreases as filter media becomes saturated over months of use.  

Symptoms of a dirty or blocked refrigerator air filter include:

• Reduced airflow causes higher compressor runtime hours  
• Odors being pulled into the fridge from unfiltered vents  
• Shortening of food storage life due to unpurified air exposure
• Reduced fan speeds or strange noises originating from the vents

This genuine Whirlpool filter is also compatible with Maytag, Jenn-Air, and Amana models as well.

This refrigerator pan cover assembly forms the shelf surface above a drawer and supports the drawer's movement. Replacing a damaged cover restores a level storage surface and smooth, reliable drawer alignment.

• Forms the flat shelf surface over a refrigerator drawer to securely hold items
• Supports and aligns the drawer so it opens and closes properly
• Restores stability if the original cover is cracked, bowed, or broken

• Disconnect power to the refrigerator before servicing
• Remove food items; slide out and remove the drawer beneath the cover
• Lift/tilt the damaged cover out; transfer any reusable components from the original cover if applicable
• Set the new cover in place and reinstall the drawer; verify smooth operation

The Drawer Roller is an OEM part for Whirlpool refrigerators, specifically designed to facilitate the smooth and effortless sliding of drawers within the appliance. This small but crucial component ensures that the refrigerator's drawers open and close with ease, allowing for convenient access to fruits, vegetables, meats, and other items stored inside. 

Causes of a bad Drawer Roller can stem from wear and tear over time, accumulation of debris or food particles in the roller mechanism, or damage from overloading the drawer beyond its capacity.  

Symptoms of a bad Drawer Roller include:

• Drawers sticking or jamming when you try to open or close them
• A grinding or squeaking noise during drawer movement
• The drawer sagging or not aligning properly within the refrigerator

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This replacement slide restores smooth movement and stable support for a drawer or rack guide. It replaces a worn or damaged slide so the rack or drawer tracks properly and reduces sticking or noise during use. What it does:

• Guides and supports a rack or drawer so it moves in and out smoothly
• Helps prevent the rack or drawer from binding, catching, or sagging
• Reduces grinding or scraping noises caused by damaged or worn slides
• Restores proper alignment for secure loading and unloading

• One replacement slide

• Disconnect power to the appliance before beginning work; shut off water supply if the repair affects water connections
• Remove the affected rack/drawer per your model instructions to access the slide
• Compare the old slide to the new part to ensure correct orientation before installing
• Use appropriate hand tools; avoid forcing parts and wear gloves and eye protection

This pan cover assembly for the fresh food section forms the shelf above a refrigerator drawer, supporting the glass and guiding the bin so it slides smoothly—restoring strength and organization when the original is cracked or warped.

• Creates the shelf surface above drawer(s) and supports the glass insert
• Provides alignment/rails so drawer(s) open and close correctly
• Helps contain spills and separates the drawer compartment from the shelf area
• Replace if cracked, broken, bowed, or if drawers bind, won't close fully, or the glass won't sit flat

• Disconnect power and remove food from the work area
• Slide out drawer(s) and lift out the glass
• Transfer any reusable trims or controls from the old cover to the new one, if applicable
• Set the new cover level, reinstall the glass and drawer(s), and verify smooth operation

The Snack Pan is an OEM part for Whirlpool refrigerators. This pan provides a dedicated space for storing snacks, deli items, and other small food items, making them easily accessible.

Over time, the snack pan may need replacing due to wear and tear, such as cracking, warping, or becoming difficult to slide in and out.

Symptoms of a bad Snack Pan include:

• Difficulty fitting the pan into its designated slot
• Cracks or breaks in the pan material
• The pan not sliding smoothly or getting stuck

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This crisper pan is the refrigerator drawer pan that supports the produce drawer and contains spills so they don't drip into lower compartments. It restores proper drawer support and prevents moisture or food debris from reaching below. What it does:

• Supports the crisper/drawer so produce slides and stores correctly
• Collects spills and drips to protect the fresh-food compartment below
• Replaces cracked, warped, or damaged pans that allow leaks or uneven drawers
• Helps maintain a clean, stable area for fruits and vegetables

• Remove the crisper drawer and slide the old pan out; installation is a reverse of removal
• Power disconnection is not usually required, but unplug the appliance or disconnect power if accessing components where electrical hazards exist
• Handle edges carefully and verify correct orientation before sliding the drawer back in

This pan roller axle fits refrigerator drawers. It's the small support pin that anchors the roller so the crisper or pantry pan glides smoothly. Replacing a damaged axle restores proper glide and keeps the drawer tracking correctly.

• Secures the drawer's roller to the bin or rail so the pan slides smoothly
• Helps keep the crisper/pantry drawer level and properly aligned
• Common symptoms: drawer hard to open/close, sags on one side, scraping/clicking sounds
• Visible damage or a missing axle/roller at the drawer corner

• Unplug the refrigerator, remove contents, and take out the affected drawer
• Locate the broken axle and gently pry/pull it out
• Seat the new axle fully in the mounting hole; ensure the roller spins freely
• Reinstall the drawer and check for smooth operation

This meat pan assembly replaces the deli/meat pan that supports and contains meats and deli items inside the refrigerator drawer, restoring proper storage and helping contain juices and spills for easier cleanup and organization. What it does:

• Supports deli and meat items in the refrigerator drawer and keeps them from sliding.
• Contains juices and minor spills to help protect lower drawers and shelves.
• Replaces cracked, warped, or damaged pans that prevent the drawer from seating correctly.
• Helps maintain an organized deli compartment for easier access to stored foods.

• Most installs are tool-free — the pan typically slides into the drawer track; remove food and the drawer first.
• Handle carefully to avoid scratching or cracking the new pan during installation.
• Inspect surrounding tracks, clips, and trim; replace any broken fasteners to ensure proper fit.