Parts for Kenmore 106.51189112 (10651189112, 106 51189112): Refrigerator Shelf Parts

The FreshFlow Refrigerator Air Filter is an OEM component for Whirlpool and Maytag refrigerators. Located inside the ventilation system, this filter purifies circulated air. This air filter is 3" wide by 2" high and white in color. It should be replaced every 6 months to ensure the best performance.

Causes of failure relate to clogging from trapped dust, dander and other allergens despite regular replacement intervals. Performance decreases as filter media becomes saturated over months of use.  

Symptoms of a dirty or blocked refrigerator air filter include:

• Reduced airflow causes higher compressor runtime hours  
• Odors being pulled into the fridge from unfiltered vents  
• Shortening of food storage life due to unpurified air exposure
• Reduced fan speeds or strange noises originating from the vents

This genuine Whirlpool filter is also compatible with Maytag, Jenn-Air, and Amana models as well.

This cover assembly replaces a damaged or missing pan cover to restore proper fit and protection for internal components. It helps keep debris and moisture away from the pan area and maintains the appliance's finished appearance. What it does:

• Replaces a worn or broken pan cover to protect underlying components from debris and spills
• Keeps the drain/pan area cleaner to help prevent clogs and water entry where not intended
• Restores proper fit and finish to the appliance cabinet or compartment
• Secures or aligns adjacent parts that mount to or rest on the pan area

• One cover assembly

• Disconnect power (and water, if applicable) before beginning any repair
• Typical installation requires removing access panels and fasteners; keep hardware for reuse
• Handle plastic components carefully to avoid cracking; avoid overtightening fasteners
• Refer to your model's service manual or parts diagram for exact placement and orientation

This replacement slide restores smooth movement and stable support for a drawer or rack guide. It replaces a worn or damaged slide so the rack or drawer tracks properly and reduces sticking or noise during use. What it does:

• Guides and supports a rack or drawer so it moves in and out smoothly
• Helps prevent the rack or drawer from binding, catching, or sagging
• Reduces grinding or scraping noises caused by damaged or worn slides
• Restores proper alignment for secure loading and unloading

• One replacement slide

• Disconnect power to the appliance before beginning work; shut off water supply if the repair affects water connections
• Remove the affected rack/drawer per your model instructions to access the slide
• Compare the old slide to the new part to ensure correct orientation before installing
• Use appropriate hand tools; avoid forcing parts and wear gloves and eye protection

This replacement cover protects internal components and keeps the appliance cabinet sealed from dust, debris and accidental contact. Restores the exterior finish and helps maintain reliable operation when the original cover is damaged or missing. What it does:

• Shields control components, wiring and openings from contamination and physical damage
• Prevents accidental contact with internal parts that could cause sparks or shorting
• Helps stop dust and lint buildup that can affect performance
• Restores a finished appearance to the appliance cabinet

• Disconnect power (unplug appliance or switch off breaker) before starting any repair
• Basic hand tools typically required; save all mounting hardware if reusing
• Handle cover edges carefully to avoid scratches; align tabs or screw holes before fastening

This snack pan assembly is the replacement storage tray that fits inside compatible refrigerators to hold small items and snacks, restoring usable shelf space and organization. What it does

• Replaces a worn, cracked, or missing snack pan to securely hold small food items
• Restores proper fit and alignment in the designated fridge compartment
• Helps prevent spills from spreading to lower shelves
• Matches OEM form for correct fit when installed

• One snack pan assembly

• Designed to drop into the existing pan supports or slides; no special tools typically required
• Remove food and shelves from the area before installing to avoid damage
• Inspect mounting rails or clips for wear; replace if damaged to ensure secure fit
• Follow refrigerator owner's manual safety guidance and unplug appliance if required for access

The Drawer Roller is an OEM part for Whirlpool refrigerators, specifically designed to facilitate the smooth and effortless sliding of drawers within the appliance. This small but crucial component ensures that the refrigerator's drawers open and close with ease, allowing for convenient access to fruits, vegetables, meats, and other items stored inside. 

Causes of a bad Drawer Roller can stem from wear and tear over time, accumulation of debris or food particles in the roller mechanism, or damage from overloading the drawer beyond its capacity.  

Symptoms of a bad Drawer Roller include:

• Drawers sticking or jamming when you try to open or close them
• A grinding or squeaking noise during drawer movement
• The drawer sagging or not aligning properly within the refrigerator

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This pan roller axle fits refrigerator drawers. It's the small support pin that anchors the roller so the crisper or pantry pan glides smoothly. Replacing a damaged axle restores proper glide and keeps the drawer tracking correctly.

• Secures the drawer's roller to the bin or rail so the pan slides smoothly
• Helps keep the crisper/pantry drawer level and properly aligned
• Common symptoms: drawer hard to open/close, sags on one side, scraping/clicking sounds
• Visible damage or a missing axle/roller at the drawer corner

• Unplug the refrigerator, remove contents, and take out the affected drawer
• Locate the broken axle and gently pry/pull it out
• Seat the new axle fully in the mounting hole; ensure the roller spins freely
• Reinstall the drawer and check for smooth operation

This crisper pan is the replacement pan assembly that supports the refrigerator crisper drawer and catches spills to keep the fresh-food compartment clean. It restores a stable base for produce storage and helps contain leaks. What it does:

• Provides a stable bottom for the crisper drawer and stored produce
• Collects spills and liquids to prevent messes from reaching lower compartments
• Replaces cracked, warped, or damaged pans that cause leaks or items to fall through
• Helps the crisper drawer operate smoothly when seated correctly

• Remove all contents and slide out the crisper drawer before replacing the pan
• Inspect mounting rails and seat the pan fully so the drawer rides smoothly
• Handle carefully to avoid damage; if the pan is glass, lift with both hands

This glass shelf assembly replaces a damaged or missing refrigerator interior shelf to restore usable storage and a finished interior look. Tempered glass provides a flat, stable surface for food storage and easy cleaning. What it does:

• Replaces cracked, chipped, or broken interior glass shelves to restore storage space and safety
• Provides a level surface for arranging containers, produce, and other refrigerated items
• Helps contain spills for easier cleanup and prevents drips from reaching lower compartments
• Fits into existing shelf supports or track locations to resume normal shelf function

• One (1) glass shelf assembly as shown

• Remove food and any loose items from the shelf area before installing
• Handle tempered glass carefully to avoid injury; wear gloves and eye protection as needed
• Slide shelf into the designated supports or track until fully seated; confirm stability before loading
• No electrical work required; for shelf location guidance