Parts for Maytag MSC21C6MFZ00: Refrigerator Shelf Parts

The FreshFlow Refrigerator Air Filter is an OEM component for Whirlpool and Maytag refrigerators. Located inside the ventilation system, this filter purifies circulated air. This air filter is 3" wide by 2" high and white in color. It should be replaced every 6 months to ensure the best performance.

Causes of failure relate to clogging from trapped dust, dander and other allergens despite regular replacement intervals. Performance decreases as filter media becomes saturated over months of use.  

Symptoms of a dirty or blocked refrigerator air filter include:

• Reduced airflow causes higher compressor runtime hours  
• Odors being pulled into the fridge from unfiltered vents  
• Shortening of food storage life due to unpurified air exposure
• Reduced fan speeds or strange noises originating from the vents

This genuine Whirlpool filter is also compatible with Maytag, Jenn-Air, and Amana models as well.

The Whirlpool EveryDrop Ice and Refrigerator Water Filter 1 is an OEM replacement part for Whirlpool refrigerators. This filter works to remove small particles from water to ensure clean, great-tasting ice and drinking water directly from the refrigerator door.  Measuring approximately 2.50 x 2.50 x 8.69 inches, this filter is easy to install. 

For optimal performance, we recommend replacing the filter every six months. The filter material is made from coconut carbon block, which has a micron rating of 0.5 and a flow rate of 0.5 gpm. The filter is designed to operate at a maximum pressure of 125 psi and an operating temperature of 38-100°.

Symptoms of a filter needing replacement include:

• Gradual decline in water/ice quality over time exhibiting muddy appearance or odd tastes
• Filter life indicator appears showing it is time for a new one 

Causes stem from normal usage over the stated capacity of the original filter. Allowing one to expire could produce unhealthy water.

This OEM replacement part is compatible with select Maytag, Jenn-Air, and Amana models as well.

This pan cover assembly replaces a damaged or missing pan cover to restore proper protection and containment around the appliance's pan area. It helps keep internal components shielded from debris and directs water where intended. What it does:

• Fits over the pan area to protect internal parts from spills, debris, and splashes
• Helps direct and contain water or condensate to the appliance's drain pathways
• Restores a proper seal/fit where the original cover was cracked, warped, or missing
• Supports normal operation by preventing foreign objects from entering sensitive components

• One pan cover assembly

• High-level replacement only; verify correct part orientation before fastening
• Disconnect power and water before removing panels or working near plumbing/electrical
• Retain mounting hardware if reinstalling; replace damaged fasteners with OEM-specified parts

The Drawer Roller is an OEM part for Whirlpool refrigerators, specifically designed to facilitate the smooth and effortless sliding of drawers within the appliance. This small but crucial component ensures that the refrigerator's drawers open and close with ease, allowing for convenient access to fruits, vegetables, meats, and other items stored inside. 

Causes of a bad Drawer Roller can stem from wear and tear over time, accumulation of debris or food particles in the roller mechanism, or damage from overloading the drawer beyond its capacity.  

Symptoms of a bad Drawer Roller include:

• Drawers sticking or jamming when you try to open or close them
• A grinding or squeaking noise during drawer movement
• The drawer sagging or not aligning properly within the refrigerator

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This humidity sensor housing holds and protects the fridge's humidity/control assembly, helping maintain proper humidity-sensing operation and reliable climate control. Designed to replace a cracked or damaged housing to restore proper sensor placement and protection. What it does:

• Secures and shields the humidity sensor and related control components
• Keeps the sensor correctly positioned for accurate humidity detection
• Prevents physical damage and moisture exposure to the sensor assembly
• Helps resolve symptoms like inaccurate humidity readings or loose sensor fit

• Disconnect power to the appliance before starting any repair
• Handle the humidity sensor carefully; remove and reinstall per manufacturer guidance
• Uses basic hand tools; refer to the service manual or OEM instructions for disassembly/reassembly steps
• Replace the affected components rather than reusing damaged parts

This replacement cover protects internal components and keeps debris and lint away from sensitive parts. It restores the appliance's protective housing to help maintain safe, reliable operation. What it does:

• Shields motors, wiring, and other internal parts from dust, lint, and accidental contact
• Helps reduce debris-related issues that can lead to poor performance or odors
• Prevents exposed components that could cause safety concerns or shorting
• Can stop rubbing or vibration-related noise caused by loose or missing housing pieces

• One replacement cover

• Disconnect power (unplug or switch off breaker) before beginning any repair
• Handle edges carefully—sheet metal and plastic edges can be sharp
• Refer to the appliance service manual or schematic for exact placement and mounting steps

This snack pan is a shallow baking tray designed to hold small foods and snacks while cooking or reheating in compatible ovens. It provides a convenient surface for crisping and browning bite-sized items. What it does:

• Holds small foods and snacks for baking, reheating, or crisping
• Keeps items contained to prevent spills and promote even browning
• Works with compatible oven and range accessories designed for snack or baking pans
• Useful for single-layer cooking of appetizers, rolls, and finger foods

• One snack pan

• Place the pan directly on the oven rack or in the oven accessory position specified by your appliance manual
• Allow the pan to cool before handling; use oven mitts to prevent burns
• Do not use on stovetop burners or open flames
• Follow your appliance owner's manual for compatible rack positions, temperature limits, and cleaning instructions

This crisper pan is the replaceable bottom drawer for the refrigerator's fresh-food compartment, providing a sealed surface to hold fruits and vegetables and help contain spills for easier cleanup. What it does:

• Supports and contains produce in the fresh-food drawer to keep items organized
• Helps contain leaks and spills to prevent messes from reaching the cabinet floor
• Works with the crisper cover/slide system to maintain proper storage position
• Fits into the refrigerator's lower storage area as the removable pan under the crisper drawer

• One crisper pan

• Remove contents and slide out the existing drawer; the pan should lift or slide out for replacement
• Inspect surrounding rails and seals for damage before installing the new pan
• Handle carefully to avoid cracking; cycle placement slowly into the track to ensure proper engagement

The Axle is an OEM part for Whirlpool refrigerators. It is the mechanism that supports and enables smooth extension of shelves and drawers on sliding tracks.

Causes of a bad slide axle can include normal wear to plastic bushings from constant shelf movement, or damage from sharp or heavy items that cause stress and premature failure.

Symptoms of a faulty slide axle include:

• Shelves or drawers that do not fully extend or retract
• Resistance felt while pulling shelves out
• Squeaking or grinding noises coming from sliding areas
• Shelves that do not stay securely in place once extended

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.