Parts for Whirlpool WRS586FLDB00: 04 - Refrigerator Shelf Parts

This refrigerator pan cover assembly forms the shelf surface above a drawer and supports the drawer's movement. Replacing a damaged cover restores a level storage surface and smooth, reliable drawer alignment.

• Forms the flat shelf surface over a refrigerator drawer to securely hold items
• Supports and aligns the drawer so it opens and closes properly
• Restores stability if the original cover is cracked, bowed, or broken

• Disconnect power to the refrigerator before servicing
• Remove food items; slide out and remove the drawer beneath the cover
• Lift/tilt the damaged cover out; transfer any reusable components from the original cover if applicable
• Set the new cover in place and reinstall the drawer; verify smooth operation

This humidity sensor housing holds and protects the fridge's humidity/control assembly, helping maintain proper humidity-sensing operation and reliable climate control. Designed to replace a cracked or damaged housing to restore proper sensor placement and protection. What it does:

• Secures and shields the humidity sensor and related control components
• Keeps the sensor correctly positioned for accurate humidity detection
• Prevents physical damage and moisture exposure to the sensor assembly
• Helps resolve symptoms like inaccurate humidity readings or loose sensor fit

• Disconnect power to the appliance before starting any repair
• Handle the humidity sensor carefully; remove and reinstall per manufacturer guidance
• Uses basic hand tools; refer to the service manual or OEM instructions for disassembly/reassembly steps
• Replace the affected components rather than reusing damaged parts

This pan cover assembly for the fresh food section forms the shelf above a refrigerator drawer, supporting the glass and guiding the bin so it slides smoothly—restoring strength and organization when the original is cracked or warped.

• Creates the shelf surface above drawer(s) and supports the glass insert
• Provides alignment/rails so drawer(s) open and close correctly
• Helps contain spills and separates the drawer compartment from the shelf area
• Replace if cracked, broken, bowed, or if drawers bind, won't close fully, or the glass won't sit flat

• Disconnect power and remove food from the work area
• Slide out drawer(s) and lift out the glass
• Transfer any reusable trims or controls from the old cover to the new one, if applicable
• Set the new cover level, reinstall the glass and drawer(s), and verify smooth operation

The Snack Pan is an OEM part for Whirlpool refrigerators. This part stores snacks and other small food items, providing an organized and accessible storage solution within the refrigerator.  The pan measures approximately 17.25" wide at the front, 20" long, and 5" high.

Common causes of a faulty snack pan include cracks or breaks due to heavy items being placed on it, wear and tear from frequent use, or warping from exposure to temperature fluctuations.

Symptoms of a bad snack pan include:

• Cracks or splits in the pan
• Difficulty sliding the pan in and out
• The pan not fitting securely in its designated space
• Visible warping or bending

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Drawer Roller is an OEM part for Whirlpool refrigerators, specifically designed to facilitate the smooth and effortless sliding of drawers within the appliance. This small but crucial component ensures that the refrigerator's drawers open and close with ease, allowing for convenient access to fruits, vegetables, meats, and other items stored inside. 

Causes of a bad Drawer Roller can stem from wear and tear over time, accumulation of debris or food particles in the roller mechanism, or damage from overloading the drawer beyond its capacity.  

Symptoms of a bad Drawer Roller include:

• Drawers sticking or jamming when you try to open or close them
• A grinding or squeaking noise during drawer movement
• The drawer sagging or not aligning properly within the refrigerator

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Axle is an OEM part for Whirlpool refrigerators. It is the mechanism that supports and enables smooth extension of shelves and drawers on sliding tracks.

Causes of a bad slide axle can include normal wear to plastic bushings from constant shelf movement, or damage from sharp or heavy items that cause stress and premature failure.

Symptoms of a faulty slide axle include:

• Shelves or drawers that do not fully extend or retract
• Resistance felt while pulling shelves out
• Squeaking or grinding noises coming from sliding areas
• Shelves that do not stay securely in place once extended

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Crisper Drawer is an OEM replacement part for Whirlpool refrigerators. Used within the fresh food compartment, this crisper creates a specialized storage area for preserving fruits and vegetables longer. Its precise sliding mechanics and vapor-sealed design maintain optimal humidity for crisping foods while preventing moisture build-up.

Causes of a bad crisper drawer include damaged seals, broken rollers inhibiting opening/closing, or cracking reducing humidity control.

Symptoms of a bad crisper drawer include:

• Warped or stuck drawer movement  
• Moisture inside the refrigerator or on stored items
• Dried out or wilted produce due to improper humidity  
• Unpleasant odors from lack of proper sealing

It is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, and Kenmore models.

This replacement meat pan restores the refrigerator's deli drawer, giving you a dedicated space for meats and snacks while sliding smoothly on the existing rails. Replace cracked or missing pans to keep contents organized and contained.

• Provides a sliding storage drawer for meats and deli items in the fresh food compartment
• Fits into existing shelf rails for smooth access and organization
• Helps contain spills and prevent items from falling into lower areas
• Replace if the drawer is cracked, broken, warped, missing, or no longer slides/stays on its tracks

• Remove food from the drawer and slide the old pan straight out of the rails
• Inspect/clean the rails and check for bends before installing the new pan
• Transfer any removable trim or accessories from the old drawer, if present
• Align with the rails and slide in until fully seated; do not force