Parts for Ge AEG18DZL1: Room Air Conditioner Parts

This front panel assembly replaces the cosmetic and protective trim that surrounds the appliance control area, restoring a clean appearance and protecting buttons and the display from damage. It's a direct-fit exterior panel for the control console. What it does:

• Covers and protects control buttons, touchpads, and the display from spills, dust, and daily wear
• Restores the appliance's appearance when the original panel is cracked, scratched, or faded
• Provides a stable mounting surface for control components and trim pieces
• Can reduce rattles or movement caused by a damaged or loose front panel

• Disconnect power (unplug or switch off breaker) before starting any service.
• Remove control console screws and any retaining clips; handle trim gently to avoid breaking tabs.
• Use proper tools and keep track of fasteners; some panels may require control bracket or button alignment during reassembly.

This flat washer provides a secure, even load distribution for a fastener on the appliance, helping maintain proper assembly and reduce loosening or wear. Use it to replace a damaged or missing washer during repairs. What it does:

• Sits under a nut or bolt to spread load and protect the appliance surface
• Helps prevent fasteners from loosening due to vibration
• Restores proper spacing and alignment for connected parts
• Commonly replaced when you see corrosion, cracking, or a loose connection

• One flat washer

• Disconnect power and turn off water supply before starting any repair
• Tighten fasteners to a snug fit—avoid over-tightening which can crush the washer
• If adjacent parts show damage or corrosion, inspect and replace as needed

This nut with attached washer is a small securing fastener used to clamp appliance parts and prevent loosening. It provides a low-profile, integrated washer bearing surface for a reliable hold. What it does:

• Secures panels, brackets, or components to prevent movement and rattling
• Maintains clamping force where an integrated washer is needed
• Helps keep electrical and mechanical connections stable
• Common symptom: loose or vibrating parts, squeaks, or components that shift during use

• One nut with attached washer

• Disconnect power and water before servicing
• Use the correct socket or wrench to avoid rounding the nut
• Tighten to snug fit — avoid overtightening which can strip threads or damage parts
• If replacing a rusted or damaged fastener, inspect mating threads and replace as needed

This spring washer provides resilient tension to help keep screws and bolts from loosening on appliance assemblies. It's a simple replacement part that restores proper fastener tension and helps maintain secure connections. What it does:

• Applies spring force around a fastener to resist vibration-related loosening
• Commonly used on panels, brackets, and components that see movement or vibration
• Can reduce rattling and intermittent connection issues caused by loose hardware
• Works with 6 mm-diameter fasteners where a small lock-style washer is required

• Disconnect power and unplug the appliance before servicing
• Use the correct 6 mm fastener and proper orientation when reinstalling
• Tighten hardware to the OEM's recommended torque if available; avoid overtightening
• If other fasteners or parts are damaged, replace them to ensure a secure repair

A small mounting nut used to secure components and panels on compatible appliances. Replaces a loose or missing nut to restore stable, safe fastening and reduce rattling or wobble. What it does:

• Secures panels, brackets, or assemblies to the appliance frame
• Prevents fasteners from backing out during normal operation
• Helps stop rattling, vibration noise, and loose-fitting parts
• Restores proper alignment for attached components

• Disconnect power and water before beginning any repair
• Match threads and size before installation; hand-start the nut to avoid cross-threading
• Tighten securely with the correct socket or wrench, but do not overtighten
• If the original fastener was damaged, replace the mating bolt/stud as needed

This axial flow fan moves air through the appliance to help cool internal components and support proper airflow. Replacing a worn or damaged fan restores quiet operation and helps prevent overheating-related issues. What it does:

• Circulates air across internal components or heat exchangers to maintain proper operating temperatures
• Helps prevent overheating of electronics, motors, or heating elements
• Reduces abnormal noise caused by worn or imbalanced fan blades or bearings
• Supports consistent airflow for reliable appliance performance

• One axial flow fan assembly

• Disconnect power to the appliance before starting any repair
• Handle the fan blades carefully to avoid damage; align properly during installation
• Verify secure mounting and electrical connections before restoring power
• Test appliance operation after installation and observe for proper airflow and quiet operation

This 8 mm diameter gasket creates a reliable seal in appliance assemblies to help prevent leaks and loss of pressure or airflow. It's a small replacement part that restores proper sealing where a worn gasket is causing issues. What it does:

• Seals joints and connections to help prevent water or air leaks
• Restores tight fit where a cracked, brittle, or flattened gasket allows seepage
• Reduces vibration noise from loose or poorly sealed parts
• Helps maintain proper operation of the sealed compartment or fluid path

• One 8 mm diameter gasket

• Disconnect power and water supply (when applicable) before servicing the appliance
• Remove old gasket and thoroughly clean mating surfaces before installing the new gasket
• Ensure the gasket is fully seated and aligned along the entire contact surface for an effective seal

A small circular rubber gasket designed to provide a reliable seal where a 8 mm diameter gasket is specified. Helps prevent air, moisture, or dust from passing through a joint or opening in the appliance. What it does:

• Creates a tight seal around shafts, openings, or mating surfaces to reduce leaks and drafts
• Cushions and protects components from vibration and wear
• Helps maintain correct airflow or pressure paths inside the appliance
• Common replacement when a worn or cracked seal causes unwanted noise, moisture, or air loss

• One 8 mm diameter gasket

• Inspect mating surfaces and clean thoroughly before installing the new gasket
• Replace only with the exact gasket size specified for your appliance to ensure proper sealing
• If adhesive or a retainer is used, follow the appliance manufacturer's instructions for secure attachment
• Disconnect power or follow appliance safety procedures before servicing

This M8 nut secures components to an M8 stud or bolt, restoring a firm mechanical connection. Use it to replace a missing, stripped, or loose fastener so panels and brackets stay properly attached. What it does:

• Threads onto an M8 bolt or stud to lock parts together.
• Prevents components from working loose due to vibration.
• Commonly used on brackets, mounts and assemblies that require an M8 fastener.
• Replacing a worn or missing nut can stop rattling, movement, or misalignment.

• Disconnect power and follow appliance safety procedures before servicing.
• Use the correct sized wrench or socket to avoid rounding the nut.
• Tighten to the manufacturer's recommended torque where available; do not overtighten.
• Inspect mating bolt/stud threads and replace if damaged.

This curtain quickset is a small mounting clip that secures the appliance's inner curtain/trim so panels and seals stay aligned for proper fit and quiet operation. It restores correct positioning after wear or damage. What it does:

• Secures the inner curtain/trim to the door or frame to maintain proper alignment
• Prevents rattling, gaps, or uneven panel fit that can affect sealing and appearance
• Keeps adjacent trim pieces from shifting during normal use
• Helps restore factory fit after a broken or missing clip

• Disconnect power or gas to the appliance before beginning any work.
• Handle surrounding trim and glass carefully to avoid damage; small fasteners can be sharp.
• Basic hand tools may be required; follow the appliance service manual for removal/installation steps.

This top guide secures and aligns the appliance's upper panel or cooktop, helping smooth movement and stable positioning. It restores proper fit and reduces rattling or misalignment for a safer, more reliable top surface. What it does:

• Guides and supports the appliance top or panel to maintain correct alignment
• Reduces noise and movement caused by a loose or worn guide
• Helps prevent gaps that can trap debris or affect surface stability
• Works as a direct-fit replacement for the original guide to restore intended function

• Disconnect power and any fuel sources before starting repairs
• Access the guide by removing the top/panel per the appliance service instructions
• Inspect adjacent clips, screws, and mounting points and replace if damaged

This molded form gasket provides a replacement seal designed to restore a tight closure and reduce air or water leakage. It helps maintain proper appliance operation by replacing a worn or damaged seal. What it does:

• Seals the mating surface to prevent air or water from leaking out
• Helps reduce frost build-up or moisture-related pooling when the seal is compromised
• Restores door/compartment closure where a deformed or torn gasket allows gaps
• Commonly replaced when gasket shows visible cracks, gaps, or continual leaks

• Disconnect power and remove any stored items before replacing the gasket
• Clean and dry the sealing surface thoroughly to ensure a proper fit
• Align the gasket into the channel and press evenly; some trims may require careful seating along the entire edge
• Inspect surrounding trim and hardware; replace or tighten as needed for a complete seal

This Wi-Fi control module provides wireless communication between your appliance and its companion app or smart-home network, restoring remote monitoring and control features when the original board fails. What it does:

• Enables the appliance to connect to a home Wi-Fi network for app-based monitoring and control
• Handles communication between the appliance's main control and cloud services
• Common symptom: no Wi-Fi connection or no remote/app access
• Common symptom: Wi-Fi or network error indicator on the appliance
• Common symptom: app shows appliance as offline or unresponsive

• One Wi-Fi control module

• Disconnect power to the appliance before beginning work to avoid shock or damage
• Handle the circuit board by the edges and avoid static discharge; use proper ESD precautions
• After replacement, follow the appliance app or setup guide to reconnect the module to the home network

This capacitor clamp is a small metal bracket that secures a refrigerator or appliance capacitor to the cabinet, helping keep the capacitor stable and preventing movement or vibration during operation. It preserves reliable electrical connections and reduces noise from loose components. What it does

• Holds the capacitor firmly in place to prevent shifting and rattling
• Helps maintain stable capacitor connections to avoid intermittent motor or control issues
• Reduces vibration-related noise from the capacitor area
• Protects the capacitor from contact with other components that could cause wear or damage

• One capacitor clamp/mounting bracket

• Disconnect power before accessing electrical components
• Inspect the clamp for cracks, corrosion, or missing fasteners and replace if damaged
• Retain original mounting hardware when possible; use compatible screws or bolts if replacements are needed

This board mount secures the appliance control board to the chassis, keeping electronic controls stable and correctly positioned for reliable operation. Replaces worn or broken mounting hardware to reduce rattling and intermittent connections. What it does:

• Holds the control board in place to prevent movement or vibration
• Maintains proper alignment for wire harnesses and connector engagement
• Helps prevent intermittent electrical contact and related control issues
• Common symptom: loose or rattling electronics, intermittent control function

• High-level replacement; disconnect power before beginning work
• Inspect surrounding wiring and connectors while replacing the mount
• Use correct fasteners and torque to avoid cracking the board or chassis

This replacement power cord restores electrical connection to compatible GE appliances so the unit powers on safely and reliably. Use it when the original cord is damaged, frayed, or no longer providing consistent power. What it does:

• Replaces a worn or damaged mains cord to restore power to the appliance
• Stops issues caused by frayed wires, exposed conductors, or loose connections
• Helps eliminate intermittent power, arcing at the plug, or visible cord damage
• Works as the direct electrical connection between the appliance and household outlet

• Always unplug the appliance or shut off breaker power before servicing
• Basic hand tools may be required to remove access panels and secure wiring terminals
• Confirm cord orientation and terminal connections match the original; tighten terminals firmly