Parts for Ge AEG24DZL1: Room Air Conditioner Parts

This replacement refrigerator water filter installs in the dispenser/ice line to help improve water taste and quality. It restores proper filtration for clearer ice and better-tasting drinking water. What it does:

• Replaces a worn or clogged refrigerator water filter assembly to restore normal flow
• Helps reduce common taste and odor issues from chlorine and other particulates
• Fixes symptoms such as slow dispenser flow, off-tasting water, or cloudy ice when the filter is failing
• Returns the appliance to intended inline filtration function used by the dispenser and ice maker

• One replacement refrigerator water filter assembly

• Turn off the refrigerator water supply and run the dispenser to relieve line pressure before removing the old filter
• Follow the refrigerator manufacturer's removal and seating procedure; ensure a proper seal to prevent leaks
• Flush the water line to clear air and loose carbon fines
• If you find continuing leaks or poor flow after install, double-check seating, O-rings, and water supply valve

This nut-washer secures appliance assemblies where a captive nut and flat washer are needed, helping keep fasteners tight during normal operation. It's a small replacement part that prevents loosening and maintains proper component alignment. What it does:

• Acts as a combined nut and washer to fasten components and distribute load
• Keeps threaded connections from backing off due to vibration
• Restores secure attachment when the original nut-washer is damaged, stripped, or missing
• Commonly replaced when assemblies wobble, rattle, or come loose

• One nut-washer

• Disconnect power and unplug the appliance before beginning any repair
• Use the proper screwdriver or socket to avoid rounding the fastener
• If threads are damaged, replace the mating screw or stud rather than over-tightening

A small flat washer used as a replacement fastening spacer that helps secure bolts and prevent metal-to-metal wear. Restores proper spacing and fastener tension so assemblies stay aligned and tight. What it does:

• Acts as a spacer and load-distribution surface under a bolt or nut
• Prevents fasteners from loosening and reduces metal wear at contact points
• Restores correct alignment where a missing or worn washer caused vibration or rattling
• Simple, durable replacement for worn or corroded washers in mechanical assemblies

• Disconnect power before servicing electrical appliances to avoid shock
• Use appropriate hand tools; replace with the same style and thickness for correct fit
• Inspect mating fasteners and surfaces; replace any damaged hardware

This 10 mm-diameter gasket provides a precise seal to prevent leaks and maintain proper operation of the appliance connection where it installs. Durable construction helps restore a tight, reliable seal. What it does:

• Creates a watertight/airtight seal at the mating joint to prevent leaks
• Helps maintain proper pressure and function of the connected component
• Replaces worn, cracked or flattened seals that can cause drips or loss of performance
• Restores reliable sealing to reduce cycling or moisture-related issues

• Disconnect power and shut off water supply before starting any repair
• Inspect mating surfaces and clean away residue to ensure a proper seal
• Replace the old gasket fully; do not stretch excessively when installing
• After installation, restore power/water and check the connection for leaks

This evaporator fan motor circulates cold air through the freezer and refrigerator compartments to help maintain even temperatures and proper cooling performance. Replaces a worn or noisy motor to restore airflow. What it does:

• Spins the evaporator fan blade to move cold air across the evaporator coils and into the compartments
• Commonly used when cooling is uneven or the fridge/freezer is warmer than expected
• Can resolve loud buzzing, grinding, or no-airflow symptoms when motor is failed
• Works with the existing fan blade and mounting hardware when compatible

• One evaporator fan motor

• Disconnect power to the appliance before servicing to avoid electrical shock
• Access may require removing interior panels or the evaporator cover; keep fasteners for reassembly
• Handle the motor and connector carefully to avoid damaging the wiring harness
• Fully defrost and dry the area before installing the replacement

This spring washer provides resilient tension to help keep screws and bolts from loosening on appliance assemblies. It's a simple replacement part that restores proper fastener tension and helps maintain secure connections. What it does:

• Applies spring force around a fastener to resist vibration-related loosening
• Commonly used on panels, brackets, and components that see movement or vibration
• Can reduce rattling and intermittent connection issues caused by loose hardware
• Works with 6 mm-diameter fasteners where a small lock-style washer is required

• Disconnect power and unplug the appliance before servicing
• Use the correct 6 mm fastener and proper orientation when reinstalling
• Tighten hardware to the OEM's recommended torque if available; avoid overtightening
• If other fasteners or parts are damaged, replace them to ensure a secure repair

A small mounting nut used to secure components and panels on compatible appliances. Replaces a loose or missing nut to restore stable, safe fastening and reduce rattling or wobble. What it does:

• Secures panels, brackets, or assemblies to the appliance frame
• Prevents fasteners from backing out during normal operation
• Helps stop rattling, vibration noise, and loose-fitting parts
• Restores proper alignment for attached components

• Disconnect power and water before beginning any repair
• Match threads and size before installation; hand-start the nut to avoid cross-threading
• Tighten securely with the correct socket or wrench, but do not overtighten
• If the original fastener was damaged, replace the mating bolt/stud as needed

The Axial Flow Fan is an OEM part for GE air conditioners responsible for circulating air within the air conditioner unit, ensuring proper airflow and efficient cooling performance.

A bad axial flow fan can be caused by motor issues, damage to the fan blades, or wear and tear over time. If you experience reduced airflow, unusual noises coming from the air conditioner, or poor cooling performance, it may indicate a problem with the axial flow fan.

Symptoms of a bad axial flow fan include:

• Reduced or weak airflow from the air conditioner
• Unusual noises from the unit
• Uneven cooling or difficulty reaching the desired temperature
• Overheating of the air conditioner unit

Replace your faulty axial flow fan with this genuine OEM part to restore airflow on your air conditioner. This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This 8 mm diameter gasket creates a reliable seal in appliance assemblies to help prevent leaks and loss of pressure or airflow. It's a small replacement part that restores proper sealing where a worn gasket is causing issues. What it does:

• Seals joints and connections to help prevent water or air leaks
• Restores tight fit where a cracked, brittle, or flattened gasket allows seepage
• Reduces vibration noise from loose or poorly sealed parts
• Helps maintain proper operation of the sealed compartment or fluid path

• One 8 mm diameter gasket

• Disconnect power and water supply (when applicable) before servicing the appliance
• Remove old gasket and thoroughly clean mating surfaces before installing the new gasket
• Ensure the gasket is fully seated and aligned along the entire contact surface for an effective seal

A small circular rubber gasket designed to provide a reliable seal where a 8 mm diameter gasket is specified. Helps prevent air, moisture, or dust from passing through a joint or opening in the appliance. What it does:

• Creates a tight seal around shafts, openings, or mating surfaces to reduce leaks and drafts
• Cushions and protects components from vibration and wear
• Helps maintain correct airflow or pressure paths inside the appliance
• Common replacement when a worn or cracked seal causes unwanted noise, moisture, or air loss

• One 8 mm diameter gasket

• Inspect mating surfaces and clean thoroughly before installing the new gasket
• Replace only with the exact gasket size specified for your appliance to ensure proper sealing
• If adhesive or a retainer is used, follow the appliance manufacturer's instructions for secure attachment
• Disconnect power or follow appliance safety procedures before servicing

This M8 nut secures components to an M8 stud or bolt, restoring a firm mechanical connection. Use it to replace a missing, stripped, or loose fastener so panels and brackets stay properly attached. What it does:

• Threads onto an M8 bolt or stud to lock parts together.
• Prevents components from working loose due to vibration.
• Commonly used on brackets, mounts and assemblies that require an M8 fastener.
• Replacing a worn or missing nut can stop rattling, movement, or misalignment.

• Disconnect power and follow appliance safety procedures before servicing.
• Use the correct sized wrench or socket to avoid rounding the nut.
• Tighten to the manufacturer's recommended torque where available; do not overtighten.
• Inspect mating bolt/stud threads and replace if damaged.

This is a small thread-cutting screw used on appliances to secure panels, brackets, and small components. It provides a tight hold in sheet metal and other thin substrates so parts stay properly fastened during use. What it does:

• Fastens panels, trim, brackets or small parts to sheet-metal or similar materials
• Thread-cutting design creates its own mating thread for a secure fit
• Helps reduce rattles, gaps, or loose components caused by worn or missing screws
• Commonly used where a compact, low-profile fastener is required

• One replacement screw (ST4.2x9.5)

• Use the correct driver (Phillips/Torx as required) and apply steady pressure to avoid stripping the head
• Start threads straight and avoid overtightening to prevent stripping or cracking surrounding material
• Turn power off and unplug appliance before servicing any electrical components
• Replace all affected screws to ensure even fastening

This support cabinet is the structural mounting support that secures the appliance to surrounding cabinetry or framing, restoring proper alignment and stable installation for safe, vibration-free operation. What it does:

• Provides structural support and holds the appliance in the correct position within the cabinet opening
• Prevents sagging or movement that can cause door misalignment, rattling, or uneven operation
• Restores mounting points used during installation or after removal for service
• Works with factory fasteners and adjacent cabinetry to maintain a secure fit

• One support cabinet

• Requires basic tools and safe handling of the appliance
• Disconnect power and follow OEM service instructions before removing or installing the unit
• Retain and reuse any manufacturer fasteners unless replacement hardware is specified
• Check alignment and secure mounting points after installation to ensure stability

This molded form gasket provides a replacement seal designed to restore a tight closure and reduce air or water leakage. It helps maintain proper appliance operation by replacing a worn or damaged seal. What it does:

• Seals the mating surface to prevent air or water from leaking out
• Helps reduce frost build-up or moisture-related pooling when the seal is compromised
• Restores door/compartment closure where a deformed or torn gasket allows gaps
• Commonly replaced when gasket shows visible cracks, gaps, or continual leaks

• Disconnect power and remove any stored items before replacing the gasket
• Clean and dry the sealing surface thoroughly to ensure a proper fit
• Align the gasket into the channel and press evenly; some trims may require careful seating along the entire edge
• Inspect surrounding trim and hardware; replace or tighten as needed for a complete seal

This Form Gasket 2 is a replacement sealing gasket designed to restore a tight, reliable seal where the original foam/form gasket has become compressed or damaged. Replacing it helps reduce leaks and maintain normal appliance operation. What it does:

• Replaces a worn or damaged foam/form gasket to restore proper sealing
• Helps prevent water, air, or debris from passing where the original gasket seals
• Commonly used where a formed seal cushions or closes a gap in the appliance assembly
• Address symptoms such as visible gaps, leaks, rattling, or improper sealing along the joint

• One Form Gasket 2 as shown

• Install in clean, dry area; remove old gasket and clean mating surfaces before fitting the new gasket
• Fit gasket to the formed channel or mounting surface per the appliance's service instructions
• Wear gloves to protect hands from sharp edges and to avoid contaminating the gasket surface

This hardware kit provides the mounting fasteners needed to secure appliance panels and components, helping restore proper fit and reduce rattling or misalignment. Use it to replace missing or worn mounting pieces during repairs. What it does

• Supplies factory-style fasteners and small mounting pieces used to secure panels, trim, or brackets
• Helps stop loose panels, reduce vibration noise, and improve alignment of parts
• Useful when original screws or clips are missing, stripped, or damaged
• Works as a replacement kit for routine maintenance or part reinstallation

• Follow the appliance's service manual or OEM diagram for correct fastener locations
• Disconnect power and water before servicing the appliance
• Use appropriate hand tools; avoid over-tightening fasteners which can strip threads or crack panels
• Handle sharp sheet-metal edges carefully and wear eye protection

This board mount secures the appliance control board to the chassis, keeping electronic controls stable and correctly positioned for reliable operation. Replaces worn or broken mounting hardware to reduce rattling and intermittent connections. What it does:

• Holds the control board in place to prevent movement or vibration
• Maintains proper alignment for wire harnesses and connector engagement
• Helps prevent intermittent electrical contact and related control issues
• Common symptom: loose or rattling electronics, intermittent control function

• High-level replacement; disconnect power before beginning work
• Inspect surrounding wiring and connectors while replacing the mount
• Use correct fasteners and torque to avoid cracking the board or chassis

This capacitor stores and releases electrical energy to help a refrigerator's compressor or fan motor start and run reliably. Replacing a failing capacitor restores proper motor operation and can stop intermittent starting problems. What it does:

• Provides the electrical boost needed for compressor and/or condenser fan motors to start and run
• Prevents weak starts, frequent motor cycling, or motors that hum but won't start
• Helps maintain stable motor performance under load
• Can stop symptoms like no cooling, intermittent operation, or tripped breakers related to motor startup

• Always disconnect power to the appliance before servicing
• Capacitors can hold a charge—discharge safely and avoid contact with terminals
• Verify this part number matches the capacitor on your appliance before installation