Parts for Ge AEH24DSL1: Room Air Conditioner Parts

This replacement refrigerator water filter installs in the dispenser/ice line to help improve water taste and quality. It restores proper filtration for clearer ice and better-tasting drinking water. What it does:

• Replaces a worn or clogged refrigerator water filter assembly to restore normal flow
• Helps reduce common taste and odor issues from chlorine and other particulates
• Fixes symptoms such as slow dispenser flow, off-tasting water, or cloudy ice when the filter is failing
• Returns the appliance to intended inline filtration function used by the dispenser and ice maker

• One replacement refrigerator water filter assembly

• Turn off the refrigerator water supply and run the dispenser to relieve line pressure before removing the old filter
• Follow the refrigerator manufacturer's removal and seating procedure; ensure a proper seal to prevent leaks
• Flush the water line to clear air and loose carbon fines
• If you find continuing leaks or poor flow after install, double-check seating, O-rings, and water supply valve

This panel-frame sponge is a soft foam seal used around a control/door panel to cushion, seal, and reduce vibration or rattling. It helps maintain a snug fit between the panel and frame for quieter operation and improved fit. What it does:

• Fills the gap between panel and frame to reduce rattling and vibration
• Provides a cushioning barrier to protect painted or plastic surfaces
• Helps block dust and debris from entering cabinet seams
• Restores worn or compressed foam that can cause loose-feeling panels

• Disconnect power to the appliance before accessing panels or removing trim.
• Remove the panel or trim as needed to access the old sponge; keep fasteners for reassembly.
• Clean the mating surfaces of dirt, grease, and old adhesive before applying the new sponge.
• Some versions use adhesive backing; press firmly to seat. If adhesive is not present, use manufacturer-recommended adhesive or double-sided foam tape rated for appliance use.

A small connecting foam sponge used to cushion and insulate contacts between appliance components, helping reduce vibration and prevent air leaks. Fits into compact gaps where soft, compressible padding is needed to protect parts and improve sealing. What it does:

• Provides a soft, compressible barrier to cushion components and reduce vibration noise
• Acts as a small insulating seal to limit air gaps that can affect cooling or airflow
• Helps prevent metal-to-metal contact and abrasion between adjacent parts
• Useful where simple, flexible padding is needed for spacing or minor sealing

• Verify the correct placement by comparing to the old foam before removing it
• Clean and dry mounting surfaces so the foam seats properly; use appropriate adhesive only
• Avoid compressing the foam excessively; it should fit snugly without deforming surrounding parts
• Disconnect power to the appliance before accessing internal areas; follow all safety and manufacturer guidelines

This nut-washer secures appliance assemblies where a captive nut and flat washer are needed, helping keep fasteners tight during normal operation. It's a small replacement part that prevents loosening and maintains proper component alignment. What it does:

• Acts as a combined nut and washer to fasten components and distribute load
• Keeps threaded connections from backing off due to vibration
• Restores secure attachment when the original nut-washer is damaged, stripped, or missing
• Commonly replaced when assemblies wobble, rattle, or come loose

• One nut-washer

• Disconnect power and unplug the appliance before beginning any repair
• Use the proper screwdriver or socket to avoid rounding the fastener
• If threads are damaged, replace the mating screw or stud rather than over-tightening

A small flat washer used as a replacement fastening spacer that helps secure bolts and prevent metal-to-metal wear. Restores proper spacing and fastener tension so assemblies stay aligned and tight. What it does:

• Acts as a spacer and load-distribution surface under a bolt or nut
• Prevents fasteners from loosening and reduces metal wear at contact points
• Restores correct alignment where a missing or worn washer caused vibration or rattling
• Simple, durable replacement for worn or corroded washers in mechanical assemblies

• Disconnect power before servicing electrical appliances to avoid shock
• Use appropriate hand tools; replace with the same style and thickness for correct fit
• Inspect mating fasteners and surfaces; replace any damaged hardware

This 10 mm-diameter gasket provides a precise seal to prevent leaks and maintain proper operation of the appliance connection where it installs. Durable construction helps restore a tight, reliable seal. What it does:

• Creates a watertight/airtight seal at the mating joint to prevent leaks
• Helps maintain proper pressure and function of the connected component
• Replaces worn, cracked or flattened seals that can cause drips or loss of performance
• Restores reliable sealing to reduce cycling or moisture-related issues

• Disconnect power and shut off water supply before starting any repair
• Inspect mating surfaces and clean away residue to ensure a proper seal
• Replace the old gasket fully; do not stretch excessively when installing
• After installation, restore power/water and check the connection for leaks

This spring washer provides resilient tension to help keep screws and bolts from loosening on appliance assemblies. It's a simple replacement part that restores proper fastener tension and helps maintain secure connections. What it does:

• Applies spring force around a fastener to resist vibration-related loosening
• Commonly used on panels, brackets, and components that see movement or vibration
• Can reduce rattling and intermittent connection issues caused by loose hardware
• Works with 6 mm-diameter fasteners where a small lock-style washer is required

• Disconnect power and unplug the appliance before servicing
• Use the correct 6 mm fastener and proper orientation when reinstalling
• Tighten hardware to the OEM's recommended torque if available; avoid overtightening
• If other fasteners or parts are damaged, replace them to ensure a secure repair

A small mounting nut used to secure components and panels on compatible appliances. Replaces a loose or missing nut to restore stable, safe fastening and reduce rattling or wobble. What it does:

• Secures panels, brackets, or assemblies to the appliance frame
• Prevents fasteners from backing out during normal operation
• Helps stop rattling, vibration noise, and loose-fitting parts
• Restores proper alignment for attached components

• Disconnect power and water before beginning any repair
• Match threads and size before installation; hand-start the nut to avoid cross-threading
• Tighten securely with the correct socket or wrench, but do not overtighten
• If the original fastener was damaged, replace the mating bolt/stud as needed

This axial flow fan moves air through the appliance to help cool internal components and support proper airflow. Replacing a worn or damaged fan restores quiet operation and helps prevent overheating-related issues. What it does:

• Circulates air across internal components or heat exchangers to maintain proper operating temperatures
• Helps prevent overheating of electronics, motors, or heating elements
• Reduces abnormal noise caused by worn or imbalanced fan blades or bearings
• Supports consistent airflow for reliable appliance performance

• One axial flow fan assembly

• Disconnect power to the appliance before starting any repair
• Handle the fan blades carefully to avoid damage; align properly during installation
• Verify secure mounting and electrical connections before restoring power
• Test appliance operation after installation and observe for proper airflow and quiet operation

This 8 mm diameter gasket creates a reliable seal in appliance assemblies to help prevent leaks and loss of pressure or airflow. It's a small replacement part that restores proper sealing where a worn gasket is causing issues. What it does:

• Seals joints and connections to help prevent water or air leaks
• Restores tight fit where a cracked, brittle, or flattened gasket allows seepage
• Reduces vibration noise from loose or poorly sealed parts
• Helps maintain proper operation of the sealed compartment or fluid path

• One 8 mm diameter gasket

• Disconnect power and water supply (when applicable) before servicing the appliance
• Remove old gasket and thoroughly clean mating surfaces before installing the new gasket
• Ensure the gasket is fully seated and aligned along the entire contact surface for an effective seal

A small circular rubber gasket designed to provide a reliable seal where a 8 mm diameter gasket is specified. Helps prevent air, moisture, or dust from passing through a joint or opening in the appliance. What it does:

• Creates a tight seal around shafts, openings, or mating surfaces to reduce leaks and drafts
• Cushions and protects components from vibration and wear
• Helps maintain correct airflow or pressure paths inside the appliance
• Common replacement when a worn or cracked seal causes unwanted noise, moisture, or air loss

• One 8 mm diameter gasket

• Inspect mating surfaces and clean thoroughly before installing the new gasket
• Replace only with the exact gasket size specified for your appliance to ensure proper sealing
• If adhesive or a retainer is used, follow the appliance manufacturer's instructions for secure attachment
• Disconnect power or follow appliance safety procedures before servicing

This M8 nut secures components to an M8 stud or bolt, restoring a firm mechanical connection. Use it to replace a missing, stripped, or loose fastener so panels and brackets stay properly attached. What it does:

• Threads onto an M8 bolt or stud to lock parts together.
• Prevents components from working loose due to vibration.
• Commonly used on brackets, mounts and assemblies that require an M8 fastener.
• Replacing a worn or missing nut can stop rattling, movement, or misalignment.

• Disconnect power and follow appliance safety procedures before servicing.
• Use the correct sized wrench or socket to avoid rounding the nut.
• Tighten to the manufacturer's recommended torque where available; do not overtighten.
• Inspect mating bolt/stud threads and replace if damaged.

This molded form gasket provides a replacement seal designed to restore a tight closure and reduce air or water leakage. It helps maintain proper appliance operation by replacing a worn or damaged seal. What it does:

• Seals the mating surface to prevent air or water from leaking out
• Helps reduce frost build-up or moisture-related pooling when the seal is compromised
• Restores door/compartment closure where a deformed or torn gasket allows gaps
• Commonly replaced when gasket shows visible cracks, gaps, or continual leaks

• Disconnect power and remove any stored items before replacing the gasket
• Clean and dry the sealing surface thoroughly to ensure a proper fit
• Align the gasket into the channel and press evenly; some trims may require careful seating along the entire edge
• Inspect surrounding trim and hardware; replace or tighten as needed for a complete seal

This Form Gasket 2 is a replacement sealing gasket designed to restore a tight, reliable seal where the original foam/form gasket has become compressed or damaged. Replacing it helps reduce leaks and maintain normal appliance operation. What it does:

• Replaces a worn or damaged foam/form gasket to restore proper sealing
• Helps prevent water, air, or debris from passing where the original gasket seals
• Commonly used where a formed seal cushions or closes a gap in the appliance assembly
• Address symptoms such as visible gaps, leaks, rattling, or improper sealing along the joint

• One Form Gasket 2 as shown

• Install in clean, dry area; remove old gasket and clean mating surfaces before fitting the new gasket
• Fit gasket to the formed channel or mounting surface per the appliance's service instructions
• Wear gloves to protect hands from sharp edges and to avoid contaminating the gasket surface

This hardware kit provides the mounting fasteners needed to secure appliance panels and components, helping restore proper fit and reduce rattling or misalignment. Use it to replace missing or worn mounting pieces during repairs. What it does

• Supplies factory-style fasteners and small mounting pieces used to secure panels, trim, or brackets
• Helps stop loose panels, reduce vibration noise, and improve alignment of parts
• Useful when original screws or clips are missing, stripped, or damaged
• Works as a replacement kit for routine maintenance or part reinstallation

• Follow the appliance's service manual or OEM diagram for correct fastener locations
• Disconnect power and water before servicing the appliance
• Use appropriate hand tools; avoid over-tightening fasteners which can strip threads or crack panels
• Handle sharp sheet-metal edges carefully and wear eye protection

This evaporator assembly is the internal refrigeration coil that circulates cold refrigerant and helps remove heat from the freezer compartment. It's a direct-replacement service part used when the evaporator is damaged, leaking, or severely corroded. What it does:

• Circulates refrigerant through the freezer evaporator circuit to enable heat exchange
• Supports frost-free operation by providing the cooling surface for defrost cycles
• Can be required if the refrigerator is cooling poorly or running unusually long cycles

• Disconnect power before attempting any service; follow basic electrical safety
• Replace or recover refrigerant only by a certified HVAC/R technician per local regulations
• Defrost and dry the evaporator cavity before installation; check gaskets and seals during reassembly
• Inspect related components (heater, thermostat/sensor, fan) for damage; replace as needed

The Display Circuit Board is an OEM part for GE window air conditioners. Mounted at the front of the unit, it operates the LED lighting and screen for indicating settings.  

Causes of a faulty display board can include damage from moisture intrusion over time compromising sensitive onboard electronics. Condensation and dust particles get trapped inside sealed front panels adding stress.

Symptoms of a bad display board involve:

• Random shutoffs or failure to latch on temperature settings
• Inability to maintain cooling or fans at set levels 
• Refusal to power on without control response  
• Noisy buzzing or humming coming from electrical areas

This genuine GE replacement preserves convenient readout and control options. Compatible with some Frigidaire, Midea, and EdgeStar units, proper functioning maximizes user-friendly operation. Compatibility with wireless remote devices is also maintained for distance control of indoor comfort.

This is a replacement power cord that restores safe electrical connection to the appliance. Use it when the original cord is damaged or no longer supplying reliable power to help restore normal operation. What it does:

• Provides the main electrical connection between the appliance and household power
• Replaces frayed, cut, or melted cords that cause intermittent power or no power
• Removes loose or damaged plug connections that can trip breakers or cause arcing
• Helps eliminate visible burn or scorch marks at the cord or plug

• Always disconnect power at the breaker or unplug the appliance before servicing.
• Verify the cord routes through the strain-relief and is secured per the appliance's wiring harness.
• Inspect terminal connections for corrosion and tighten securely; match wire colors to original wiring.