Parts for Ge AEM18DSQ1: Room Air Conditioner Parts

This is the air filter assembly for select GE room air conditioners. It traps dust and lint before they reach the evaporator coil, helping maintain airflow and cooling performance.

• Captures airborne dust and lint to protect the coil and blower
• Helps maintain steady airflow and cooling efficiency
• Replace if cracked, warped, missing, or won't stay seated
• Common symptoms include reduced airflow and visible debris on the filter

• Unplug the unit before servicing
• Remove the front grille or filter access panel; slide the old filter out
• Install the new filter with airflow orientation matching the original
• Clean surrounding surfaces and reinstall grille before powering on

This Air Guide Frame helps direct airflow inside the appliance so exhaust and cooling air follow the correct path, protecting internal components and helping the unit vent properly. It's a direct-replacement exterior frame piece. What it does:

• Guides and channels air through the appliance's venting area to maintain proper airflow.
• Holds surrounding trim and ducting in position for a secure fit.
• A damaged or warped frame can cause restricted airflow, rattling, or misaligned trim.
• Restores proper airflow routing when replacing cracked, broken, or bent frames.

• One air guide frame

• Disconnect power (and gas, if applicable) before starting any repair.
• Remove surrounding trim or panels as required to access the frame; keep fasteners for reassembly.
• Inspect adjacent ducts, seals, and mounting tabs for damage and replace if needed.

The Display Circuit Board is an OEM part for GE window air conditioners. Mounted at the front of the unit, it operates the LED lighting and screen for indicating settings.  

Causes of a faulty display board can include damage from moisture intrusion over time compromising sensitive onboard electronics. Condensation and dust particles get trapped inside sealed front panels adding stress.

Symptoms of a bad display board involve:

• Random shutoffs or failure to latch on temperature settings
• Inability to maintain cooling or fans at set levels 
• Refusal to power on without control response  
• Noisy buzzing or humming coming from electrical areas

This genuine GE replacement preserves convenient readout and control options. Compatible with some Frigidaire, Midea, and EdgeStar units, proper functioning maximizes user-friendly operation. Compatibility with wireless remote devices is also maintained for distance control of indoor comfort.

This fan motor drives the convection blower in the oven to circulate hot air for even cooking and faster preheating. Replacing a worn motor restores proper airflow and helps improve bake and roast performance. What it does:

• Spins the convection blower to circulate hot air throughout the oven cavity
• Helps maintain consistent oven temperature and reduce hot spots
• Commonly replaced when the oven has uneven cooking, weak airflow, or loud/grinding noise from the fan
• Also needed if the fan fails to run or stops intermittently during operation

• One fan motor

• Disconnect power at the breaker before servicing the oven to avoid shock hazard
• Verify rotation direction and mounting orientation before final reassembly
• Inspect blower wheel and mounting hardware; replace any damaged components for proper fit

This axial flow fan moves air through the appliance to help cool internal components and support proper airflow. Replacing a worn or damaged fan restores quiet operation and helps prevent overheating-related issues. What it does:

• Circulates air across internal components or heat exchangers to maintain proper operating temperatures
• Helps prevent overheating of electronics, motors, or heating elements
• Reduces abnormal noise caused by worn or imbalanced fan blades or bearings
• Supports consistent airflow for reliable appliance performance

• One axial flow fan assembly

• Disconnect power to the appliance before starting any repair
• Handle the fan blades carefully to avoid damage; align properly during installation
• Verify secure mounting and electrical connections before restoring power
• Test appliance operation after installation and observe for proper airflow and quiet operation

This replacement power cord restores electrical connection to compatible GE appliances so the unit powers on safely and reliably. Use it when the original cord is damaged, frayed, or no longer providing consistent power. What it does:

• Replaces a worn or damaged mains cord to restore power to the appliance
• Stops issues caused by frayed wires, exposed conductors, or loose connections
• Helps eliminate intermittent power, arcing at the plug, or visible cord damage
• Works as the direct electrical connection between the appliance and household outlet

• Always unplug the appliance or shut off breaker power before servicing
• Basic hand tools may be required to remove access panels and secure wiring terminals
• Confirm cord orientation and terminal connections match the original; tighten terminals firmly

This side plate secures and protects the electric box on compatible ranges and ovens, helping keep wiring and components covered for safe operation. It restores the appliance's enclosure where the original plate is damaged or missing. What it does:

• Covers and protects the appliance's electric junction/connection box from debris and accidental contact
• Helps keep internal wiring routed and shielded to maintain safe operation
• Restores the appliance's exterior fit where a damaged or missing side panel causes gaps
• Reduces rattles or vibration caused by a loose or broken plate

• Turn off power to the appliance at the circuit breaker before starting work
• Installation typically requires removing access panels and securing the plate with screws
• Handle edges carefully; wear gloves to avoid sharp metal edges

This thermostat is the temperature control for room air conditioners. It senses temperature and cycles the compressor to maintain your set comfort level, helping restore consistent cooling when the original control becomes inaccurate or fails. What it does:

• Monitors temperature and opens/closes contacts to start and stop the compressor
• Helps the unit reach and maintain the temperature you select
• Helps resolve symptoms such as: AC won't turn on/off at the dial setting, runs continuously, short-cycles, or temperature adjustments have little effect
• Direct-fit replacement designed for the original mounting location

• 1 thermostat

• Disconnect power before servicing to avoid electrical shock
• Access the control panel; note wire locations and transfer any mounting hardware from the old part
• If your model uses a capillary sensing tube, route it exactly as original and secure in clips; do not kink or sharply bend it
• Reassemble, align the control knob, and test operation across several temperature settings

This support to cabinet is a metal mounting bracket that secures the appliance to surrounding cabinetry for stable, rattle-free operation. It helps keep the unit aligned and prevents shifting or sagging during normal use. What it does:

• Anchors the appliance to the cabinet frame to maintain proper alignment and fit
• Reduces vibration and rattling caused by loose or worn fasteners
• Prevents the appliance from tilting or shifting when doors or controls are used
• Restores safe, stable mounting after damage or corrosion to the original bracket

• Disconnect power (and gas if applicable) and remove surrounding trim before starting
• Retain or replace mounting hardware as needed; use screws appropriate for cabinet material
• Position bracket squarely against cabinet and appliance mounting points, then tighten securely

This curtain assembly replaces a damaged or missing door trim curtain to restore proper fit and protect internal components while improving appearance. It's a direct-replacement component used on compatible GE appliances. What it does:

• Covers and protects internal door/frame openings to keep components shielded from debris and light
• Helps maintain correct door alignment and trim fit for smooth opening and closing
• Reduces rattling or vibrating noises caused by a loose or broken curtain piece
• Restores finished appearance when the original curtain is cracked, warped, or missing

• One curtain assembly

• Disconnect power to the appliance before starting any repair
• Installation typically requires removal of the outer door or trim panel and basic hand tools
• Handle parts carefully to avoid scratching trim or damaging clips; keep fasteners organized for reassembly

A replacement window locking bracket that secures the appliance window or inner door assembly for safe, stable operation. Restores proper window alignment and helps maintain a tight, secure fit to reduce rattling and movement. What it does:

• Secures the appliance window or inner door assembly to the frame
• Prevents the window from shifting or rattling during use
• Helps maintain a tight seal for consistent performance
• Commonly replaced when bracket is bent, broken, or missing

• One window locking bracket

• Installation requires basic hand tools; disconnect power before servicing if part is behind an energized assembly
• Handle sharp edges carefully and support the window/door while removing and installing the bracket
• If fasteners are damaged or missing, replace with equivalent OEM hardware