Parts for Ge AHS24DXL1: Room Air Conditioner Parts

The Axial Flow Fan is an OEM part for GE air conditioners responsible for circulating air within the air conditioner unit, ensuring proper airflow and efficient cooling performance.

A bad axial flow fan can be caused by motor issues, damage to the fan blades, or wear and tear over time. If you experience reduced airflow, unusual noises coming from the air conditioner, or poor cooling performance, it may indicate a problem with the axial flow fan.

Symptoms of a bad axial flow fan include:

• Reduced or weak airflow from the air conditioner
• Unusual noises from the unit
• Uneven cooling or difficulty reaching the desired temperature
• Overheating of the air conditioner unit

Replace your faulty axial flow fan with this genuine OEM part to restore airflow on your air conditioner. This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This evaporator fan motor circulates cold air through the freezer and refrigerator compartments to help maintain even temperatures and proper cooling performance. Replaces a worn or noisy motor to restore airflow. What it does:

• Spins the evaporator fan blade to move cold air across the evaporator coils and into the compartments
• Commonly used when cooling is uneven or the fridge/freezer is warmer than expected
• Can resolve loud buzzing, grinding, or no-airflow symptoms when motor is failed
• Works with the existing fan blade and mounting hardware when compatible

• One evaporator fan motor

• Disconnect power to the appliance before servicing to avoid electrical shock
• Access may require removing interior panels or the evaporator cover; keep fasteners for reassembly
• Handle the motor and connector carefully to avoid damaging the wiring harness
• Fully defrost and dry the area before installing the replacement

This is the refrigerator main control board—the central electronic module that manages cooling, fans, defrost and user interface so your appliance runs on schedule and responds to commands. What it does:

• Receives inputs from sensors, user controls and timers and sends power/signals to compressor, evaporator fan and defrost heater
• Helps regulate cooling cycles and defrost timing for consistent temperature control
• Drives front-panel display, lights and status indicators
• Can cause symptoms like display errors, no response from controls, intermittent cooling, or failure of fans/compressor to run

• One main control board

• Disconnect power to the appliance before starting any repair
• Handle the board by edges and avoid static discharge; use anti-static precautions if available
• Verify connectors and sensor wiring are fully seated and undamaged before installing the replacement

This is a replacement power cord that restores safe electrical connection to the appliance. Use it when the original cord is damaged or no longer supplying reliable power to help restore normal operation. What it does:

• Provides the main electrical connection between the appliance and household power
• Replaces frayed, cut, or melted cords that cause intermittent power or no power
• Removes loose or damaged plug connections that can trip breakers or cause arcing
• Helps eliminate visible burn or scorch marks at the cord or plug

• Always disconnect power at the breaker or unplug the appliance before servicing.
• Verify the cord routes through the strain-relief and is secured per the appliance's wiring harness.
• Inspect terminal connections for corrosion and tighten securely; match wire colors to original wiring.

This capacitor stores and releases electrical energy to help a refrigerator's compressor or fan motor start and run reliably. Replacing a failing capacitor restores proper motor operation and can stop intermittent starting problems. What it does:

• Provides the electrical boost needed for compressor and/or condenser fan motors to start and run
• Prevents weak starts, frequent motor cycling, or motors that hum but won't start
• Helps maintain stable motor performance under load
• Can stop symptoms like no cooling, intermittent operation, or tripped breakers related to motor startup

• Always disconnect power to the appliance before servicing
• Capacitors can hold a charge—discharge safely and avoid contact with terminals
• Verify this part number matches the capacitor on your appliance before installation

The Display Circuit Board is an OEM part for GE window air conditioners. Mounted on the front of the unit, it houses the screen responsible for indicating settings and operation status.

Causes of a faulty display board can include damage from excessive impact or abrasion over time. Failure of onboard LED lights and digit technology due to prolonged heat and power cycling. 

Symptoms include: 

• Blank or illegible control screen readout   
• Inoperative buttons with no feedback  
• Loss of unit programming upon power losses
• Display fading, flickering or non-responsiveness

This genuine GE replacement helps maintain convenient usability and programming capabilities. Compatible with some Honeywell, Friedrich, and EdgeStar branded units, it enhances the user experience. 

This replacement refrigerator water filter installs in the dispenser/ice line to help improve water taste and quality. It restores proper filtration for clearer ice and better-tasting drinking water. What it does:

• Replaces a worn or clogged refrigerator water filter assembly to restore normal flow
• Helps reduce common taste and odor issues from chlorine and other particulates
• Fixes symptoms such as slow dispenser flow, off-tasting water, or cloudy ice when the filter is failing
• Returns the appliance to intended inline filtration function used by the dispenser and ice maker

• One replacement refrigerator water filter assembly

• Turn off the refrigerator water supply and run the dispenser to relieve line pressure before removing the old filter
• Follow the refrigerator manufacturer's removal and seating procedure; ensure a proper seal to prevent leaks
• Flush the water line to clear air and loose carbon fines
• If you find continuing leaks or poor flow after install, double-check seating, O-rings, and water supply valve

This support cabinet is the structural mounting support that secures the appliance to surrounding cabinetry or framing, restoring proper alignment and stable installation for safe, vibration-free operation. What it does:

• Provides structural support and holds the appliance in the correct position within the cabinet opening
• Prevents sagging or movement that can cause door misalignment, rattling, or uneven operation
• Restores mounting points used during installation or after removal for service
• Works with factory fasteners and adjacent cabinetry to maintain a secure fit

• One support cabinet

• Requires basic tools and safe handling of the appliance
• Disconnect power and follow OEM service instructions before removing or installing the unit
• Retain and reuse any manufacturer fasteners unless replacement hardware is specified
• Check alignment and secure mounting points after installation to ensure stability

This hardware kit provides the mounting fasteners needed to secure appliance panels and components, helping restore proper fit and reduce rattling or misalignment. Use it to replace missing or worn mounting pieces during repairs. What it does

• Supplies factory-style fasteners and small mounting pieces used to secure panels, trim, or brackets
• Helps stop loose panels, reduce vibration noise, and improve alignment of parts
• Useful when original screws or clips are missing, stripped, or damaged
• Works as a replacement kit for routine maintenance or part reinstallation

• Follow the appliance's service manual or OEM diagram for correct fastener locations
• Disconnect power and water before servicing the appliance
• Use appropriate hand tools; avoid over-tightening fasteners which can strip threads or crack panels
• Handle sharp sheet-metal edges carefully and wear eye protection