Parts for Ge APCD08AXWWW1: Room Air Conditioner Parts

This upper filter housing replaces the refrigerator's upper filter assembly to restore proper water flow and containment. It provides a secure enclosure for the filter element and helps prevent leaks and debris bypass. What it does:

• Houses the upper water filter cartridge to keep the filter sealed and aligned
• Directs filtered water to dispense and ice maker lines for consistent flow
• Helps prevent leaks by maintaining a secure seal between filter and plumbing
• Can resolve symptoms like low water flow, water taste issues, or intermittent leaking near the filter area

• Upper filter housing (1)

• Turn off power to the refrigerator and shut off the water supply before starting
• Relieve pressure by dispensing water or following the manufacturer's service instructions
• Inspect O-rings and seals; replace if worn to ensure a watertight fit
• After installation, turn water back on and check all connections for leaks before restoring power

The Connector is an OEM part for GE air conditioners responsible for securely connecting the vent hose to the air conditioner unit, allowing for proper airflow and ventilation.

A bad vent connector can be caused by wear and tear, damage, or improper installation. If you notice air leaks, poor airflow, or a loose connection between the vent hose and the air conditioner, it may indicate a problem with the vent connector.

Symptoms of a bad vent connector include:

• Air leaks or drafts around the connection point
• Reduced airflow or inadequate ventilation
• Difficulty in attaching or detaching the vent hose
• Inconsistent cooling 

Replace your faulty vent connector with this genuine OEM part to restore your air conditioner unit. This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

The Exhaust Hose is an OEM part for GE room air conditioners. This hose vents hot air and moisture from the air conditioner to the outside, preventing it from recirculating and improving the cooling efficiency of the air conditioner. It helps to maintain proper airflow and temperature regulation.

A bad exhaust hose can occur due to wear and tear over time or accidental damage. If you notice symptoms such as poor cooling performance, increased humidity in the room, or air leaks around the hose connection, it may be time to replace the exhaust hose.

Symptoms of a bad exhaust hose include:

• Poor cooling performance
• Increased humidity in the room
• Air leaks around the hose connection

Ensure optimal cooling with your GE room air conditioner by replacing the faulty exhaust hose with this genuine OEM part.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

This connector is a factory-style wiring connector that restores a secure electrical connection between appliance harnesses and components, reducing intermittent power or connection issues. What it does:

• Provides a secure wire-to-wire or wire-to-component electrical connection to restore circuit continuity
• Replaces damaged, corroded, or loose connector bodies and terminals that can cause intermittent operation
• Helps prevent arcing and poor contact that can lead to overheating or component failure
• Matches OEM fit and form to maintain original wiring routing and connector engagement

• One genuine connector

• Always disconnect power before servicing the appliance to avoid shock or injury
• Inspect mating wires and terminals for damage; replace any frayed or corroded wiring
• Use proper crimping tools or OEM-recommended termination methods when installing

This window seal plate fits the oven/microwave door to help seal and support the interior window area, reducing heat loss and protecting surrounding trim. It restores a proper door fit for safer, more efficient operation. What it does:

• Provides a protective trim around the door window to help maintain a tight seal
• Helps keep heat and cooking vapors inside the oven cavity for consistent cooking
• Prevents contact between the window and the outer door panel to reduce rattling or wear
• Addresses symptoms like visible gap at the door window, rattling window area, or damaged/warped trim

• One window seal plate as shown

• Installation typically requires removing the oven/microwave door or inner door panel
• Turn off and unplug the appliance and allow it to fully cool before starting work
• Use appropriate hand tools and keep screws and fasteners organized during disassembly

This top bracket secures the appliance's top panel to the cabinet, restoring proper alignment and reducing movement. It replaces a worn or broken top panel support to stop rattling and improve part fitment. What it does:

• Anchors the top panel to the cabinet frame to prevent shifting or gaps
• Restores correct panel alignment that can cause rubbing or uneven seams
• Stops vibration-related noise from a loose top panel
• Helps keep adjacent panels and controls stable during use

• Disconnect power and, if applicable, gas before beginning work.
• Use appropriate hand tools; support the top panel to prevent it from falling when removing fasteners.
• Inspect surrounding clips and screws; replace any damaged fasteners for a secure fit.

This top window bracket secures the appliance door/window assembly so the glass and trim stay aligned during normal use. It restores proper fit and helps prevent rattling, misalignment, or gaps around the window. What it does:

• Secures the top portion of the door/window assembly to the frame for stable alignment.
• Helps stop rattling or vibration caused by a loose or worn bracket.
• Restores correct spacing to prevent rubbing or uneven gaps around the window.
• Supports safe, consistent operation of the door/window during opening and closing.

• Disconnect power to the appliance before beginning any repair to avoid electrical or shock hazards.
• Remove the door or panel per the manufacturer instructions to access the bracket; keep track of screws and fasteners.
• Use appropriate hand tools; avoid over-tightening fasteners which can crack trim or glass.
• If the bracket attaches to or supports glass, handle glass carefully and consider wearing cut-resistant gloves and eye protection.

This is the lower door bottom window for select GE appliances, a direct-fit replacement that restores the door's protective glass and visibility. Replacing a damaged bottom window helps maintain safe operation and appearance. What it does

• Replaces a cracked, chipped, scratched, or broken bottom door window
• Restores visibility into the appliance cavity and protects internal components
• Helps maintain proper door sealing and safe use when the window is intact
• Matches OEM fit and mounting locations for straightforward replacement

• One bottom window (lower door glass) as described

• Handle carefully: glass edges can be sharp; wear cut-resistant gloves and eye protection
• Remove power to the appliance before beginning any door or glass work
• Follow OEM door-disassembly steps and keep small fasteners organized

This flat-head screw secures panels and components on compatible appliances, providing a low-profile fastener that helps keep parts aligned and reduces snagging. Use it to replace worn or missing screws for a proper fit and secure assembly. What it does:

• Fastens panels, trim, and brackets where a flush, countersunk head is needed
• Restores secure attachment when original screws are missing or stripped
• Reduces rattling and movement from loose fasteners
• Works where a low-profile, countersunk finish is required

• Disconnect power to the appliance before starting any repair
• Use the correct size screwdriver or bit to avoid stripping the head
• Tighten until snug; do not overtighten to avoid damaging threads or parts
• Keep removed hardware organized for reassembly; replace any damaged mating hardware

A pointed screw used to fasten appliance panels and trim where a self-starting tip is needed. Provides a secure hold for interior/exterior plastic or sheet-metal parts and helps keep covers and trim aligned. What it does:

• Fastens panels, trim, or lightweight components where a pointed, self-starting tip is required
• Secures parts that need a shallow pilot or thread-cutting action into thin metal or plastic
• Helps stop rattles and loose panels by holding trim and covers firmly in place
• Common replacement when original screws are stripped, missing, or corroded

• Use the correct screw size and screwdriver to avoid damaging threads or surrounding parts
• Start threading by hand to ensure alignment, then tighten securely but do not over-torque
• Disconnect power or follow appliance safety procedures when working near electrical components
• Replace stripped or damaged mating threads before installing a new screw for a lasting repair