Dishwasher Switch Surface Element Parts

Genuine Ge part

Switch, Interlock Kit

By: Ge

Part Number: WD6X199

$72.38

Compare At:: $79.62
You Save:: $7.24

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart

Genuine Frigidaire part

Switch-Pressure, #32

By: Frigidaire

Part Number: 4056016522

Best Seller

Genuine Ge part

Door Interlock Switch Assembly

4.8 (18)

By: Ge

Part Number: WD21X10169

The Door Interlock Switch Assembly is an OEM part for GE dishwashers. It is designed to ensure the dishwasher door is securely closed before the wash cycle begins, preventing leaks and ensuring the appliance operates safely.

Causes of a bad interlock switch can include wear and tear from frequent use, electrical issues, or physical damage to the switch or its housing. A malfunctioning switch can prevent the dishwasher from starting or cause it to stop mid-cycle.

Symptoms of a bad door interlock switch assembly include:

Dishwasher not starting
Interruption of wash cycles
Door not latching securely
Error codes related to door latch issues

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms

Won't start

Do-It-Yourself Stories from Customers like You My dishwasher (model # pdw8200j10bb) control panel was not lighting up and not working Scott C. • Bay Shore , NY • June 01, 2015

I found out that the door interlock switch was the usual culprit to my dishwasher not working properly and that replacing it will probably fix the problem. I ordered the part from AppliancePartsPros and the part was delivered the next day. I replaced the part in less than 30 minutes and the dishwasher was as good as new. I am impressed with the information provided on your website and that you were able to ship out on the day I ordered it. Your price is great and the part I received was in... Read more

Best Seller

Genuine Ge part

Flood Switch Assembly

5.0 (7)

By: Ge

Part Number: WD12X10151

The Flood Switch Assembly is an OEM part for GE dishwashers. This part detects water levels and prevent overfilling by shutting off the water supply if a potential flood condition is detected.

Causes of a bad flood switch assembly can include electrical failures, wear and tear over time, or damage from water exposure.

Symptoms of a bad flood switch assembly include:

The dishwasher not filling with water properly
The dishwasher overfilling or leaking
Error codes related to water levels
The dishwasher not starting or stopping mid-cycle

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms

Will not fill with water

Do-It-Yourself Stories from Customers like You Flood switch defective flooded the floor Douglas B. • Portland , MI • January 09, 2017

Ordered a new flood switch and activation stem from Aplliance Parts Pros.com. Order was delivered in about 3 days. Installed new switch and stem in about 15 min. Removed front kicker panel with two screws, the switch was just inside the panel secured with two screws. remove the electrical connector, removed screws, replace the two new parts..put the screws back in place and ran the washer...no overflows. Read more

Genuine Frigidaire part

Dishwasher Heating Element

5.0 (1)

By: Frigidaire

Part Number: 154503701

Restore proper heating and drying performance with this dishwasher heating element. It warms wash/rinse water and helps dry dishes at the end of the cycle so loads finish cleaner, drier, and on time. What it does:

Heats the water during wash/rinse to improve cleaning performance
Assists drying at the end of the cycle
Typical symptoms of a failed element include dishes not drying, sanitize option not achieved/indicator not illuminating, unusually long cycles, or visible damage/open-circuit on the element

What's included:

1 heating element

Install notes:

Disconnect power at the breaker and allow the existing element to cool before servicing
Remove the toe-kick to access wiring and mounting hardware beneath the tub
From below, disconnect the element wires and remove the retaining hardware; lift the element out from inside the tub
Feed the new element through the tub openings, secure from below, reconnect wiring, and run a test cycle to check for leaks and proper heating

Do-It-Yourself Stories from Customers like You The internal water heater in my dishwasher wasn't working Dave C. • Panton , VT • November 23, 2014

After ordering a new heater and before disassembling the dishwasher to determine that it was in fact defective I found it was ok. After downloading the repair manual I saw that either the control assembly or the control pad on the door had to be at fault. I ordered both units from you and replaced the control assembly first and found that to be the fix. My first clue to the no heat problem was seeing small amounts of white film on the clean plates. I then noted the fine screen filter was... Read more

Genuine Whirlpool part

Switch

5.0 (1)

By: Whirlpool

Part Number: W10207863

Do-It-Yourself Stories from Customers like You 14 year old kitchenaid dishwasher wasn't filling with water (only partially) had to add water during cycles William S. • Annapolis , MD • March 27, 2017

Ordered new inlet water valve and float switch kit. After repairs it now works fine. However the water inlet valve outlet end for fill hose (not water source) and wire connections (supposedly for this unit) were oriented 180 degrees opposite. I had to gently remove the blue plastic valve off the metal support bracket and turn it around and press back in place. Fortunately it appears it was designed for either orientation. Also the solenoid had to be unclipped and also rotated. Again it was... Read more