Dishwasher Upper Rack Roller Parts

This tub wheel mount secures the rack support roller to the dishwasher tub wall so racks roll smoothly. Replace a cracked or loose mount to restore smooth rack movement and prevent binding or sagging during loading and unloading.

• Secures the tub roller/wheel to the dishwasher's inner tub wall
• Provides a stable point so the rack glides smoothly on its track
• Helps keep the rack level and properly aligned
• Common symptoms: rack hard to slide, tilts or drops, scraping/grinding when moving the rack

• Disconnect power and water supply before servicing
• Pull the rack forward to access the mount on the tub sidewall
• Remove the retaining fastener or release locking tabs, then install the new mount in the same orientation
• Ensure the wheel engages the track and test rack travel for smooth operation

The Rack Stop is an OEM part for Frigidaire dishwashers. It serves an important purpose by preventing loaded dishes from shifting forward during wash cycles.

Causes of a bad rack stop can include wear and tear from regularly loading and unloading dishes, as well as minor impacts that cause cracks or breaks. Over time, the mounting screws may also loosen.

Symptoms of a bad rack stop include:

• Dishes shifting forward during wash cycles
• Gaps appearing around the dish rack where dishes are not fully secured
• Noise from dishes banging together or rattling around more than usual
• Potential damage to more delicate dishware

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

Restore worn dishwasher racks and help prevent rust stains on dishes. This white rack repair kit covers chipped or exposed rack tines and caps bare metal to reduce corrosion and extend the useful life of your racks.

• Re-coats rusted or chipped vinyl on rack tines to help stop corrosion
• Caps exposed tips to reduce rust transfer, scratching, and snags
• Useful when tine caps are missing or the rack coating is flaking
• Common symptoms: rust on tines, stained dishes, sharp/rough tine ends

• Disconnect power and remove the rack before repair
• Clean and dry affected areas thoroughly before applying coating
• Apply in a well-ventilated area; allow full cure time before using the dishwasher
• Replace the rack if metal is severely corroded or broken

The Dishwasher Adjustable Leveling Leg is designed to ensure your Samsung dishwasher sits perfectly level on any surface. This genuine OEM part provides stability, preventing unwanted movement and reducing vibration during operation. Easy to install, the LEG-ADJUST allows for precise height adjustments, accommodating uneven flooring and ensuring optimal performance. With durable construction, this part offers long-lasting support, enhancing the lifespan of your appliance. Compatible with a range of Samsung dishwasher models, the Dishwasher Adjustable Leveling Leg seamlessly integrates into your setup, helping you achieve a quiet and efficient kitchen environment. Replace worn or damaged leveling legs with this genuine OEM part to maintain your dishwasher's functionality and reliability.

The Track Stop is an OEM part for Whirlpool dishwashers. It is a component located on the tracks inside the dishwasher that holds and guides rack movement during operation. 

Symptoms of a bad track stop include:

• Racks or dishes sliding uncontrollably during the cycle  
• Difficulty fully extending or retracting racks
• Noise or grinding sounds noticed from rack movement
• Damage or wear visible on the rack tracks

Causes of a bad track stop can be a failure due to normal wear and tear over repeated use. Opening and closing the dishwasher door thousands of times can degrade track stops.

This OEM Whirlpool replacement track stop ensures proper rack guiding, securing its position to deliver dependable performance cycle after cycle. This OEM replacement is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

The Upper Rack Tub Mount Roller is an OEM part compatible with Whirlpool dishwashers. It is located in the upper rack and plays an important role in providing a smooth movement of dishes across the rack. The roller enables seamless movement of dishes in and out during loading and unloading. 

Causes of a bad roller can include wear and tear from repeated use, damage from overloading or unbalanced loads, or debris buildup that prevents proper rolling.  

Symptoms of a bad Upper Rack Tub Mount Roller include:

• Dishes getting stuck or stuck in the upper rack
• Difficulty sliding dishes in and out of the upper rack  
• Noisy or grinding sounds coming from the upper rack area
• Upper rack that does not move smoothly

 This OEM replacement is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

This stud is a small mounting fastener that provides a secure anchor point for attaching appliance components. Replacing a worn or missing stud restores a tight, aligned fit and helps prevent looseness, rattles, or shifting.

• Provides a fixed, threaded anchor for mounting a handle, bracket, or panel
• Helps keep parts aligned and secure during normal operation
• Common replacement for studs that are stripped, bent, broken, or missing
• Symptoms can include a loose or wobbly component, difficulty tightening, or visible damage/corrosion

• Disconnect power and, if applicable, shut off water or gas before servicing
• Wear cut-resistant gloves and handle panels carefully
• Hand-start threads to avoid cross-threading; tighten snugly without over-torquing
• Reinstall any covers or related hardware in their original positions

This caster assembly supports the dishwasher at the base and lets the unit roll smoothly for positioning, cleaning, or storage. Replace a worn or broken caster to restore easy mobility and stable placement.

• Provides rolling support under the appliance for easy movement
• Helps position the unit properly when setting up or storing
• Reduces dragging that can scuff floors
• Typical failure symptoms include: hard to roll, wobbling/uneven stance, squeaking or scraping noises, and visible cracks or flat spots on the wheel

• Disconnect power and water supply; empty the dishwasher
• Protect the floor, then carefully tip or lay the unit to access the caster location
• Remove the mounting fastener(s), replace the caster assembly, and tighten securely
• Set the unit upright, verify smooth rolling and stable placement, then reconnect utilities

This adjustable leveling leg threads into the appliance base to support and stabilize the unit. Replacing a worn or missing foot restores proper leveling for smoother operation, better door alignment, and reduced vibration.

• Provides height adjustment to level the appliance on uneven floors
• Helps keep the unit stable to minimize rocking and rattling
• Improves door alignment and closure when the cabinet is properly leveled
• Replaces a cracked, stripped, or missing leg

• Disconnect power; if your appliance has a water line, turn off the supply and carefully move the unit to access the leg.
• Support the appliance to relieve weight; unthread the damaged leg and start the new leg by hand to avoid cross-threading.
• Adjust height by turning the foot; use a level to ensure the cabinet is plumb and stable.
• Tighten carefully and recheck stability after the appliance is set back in place.

This adjustable leveling leg threads into the appliance base to set height and stabilize the cabinet. Replacing a worn or missing leg helps stop rocking and vibration and helps maintain proper alignment for reliable operation.

• Provides adjustable support at one corner of the appliance
• Helps level the unit for correct alignment with floor or cabinetry
• Reduces rocking, vibration, and rattling noises
• Replaces stripped, bent, cracked, or missing leg

• Disconnect power and, if applicable, shut off water before servicing
• Carefully support or brace the appliance to access the base safely
• Start the new leg by hand to avoid cross-threading; adjust height gradually
• Use a level to check side-to-side and front-to-back, then recheck after positioning

This genuine replacement part is an upper dishrack. The upper dishrack is the top shelf of a dishwasher that holds plates, bowls, and utensils. Over time through continuous use, this upper rack may become damaged, making it difficult to secure dishes during a wash cycle. If the dishrack is visibly damaged or no longer opening and shutting properly, it will need to be replaced. Thankfully, replacing this dishrack is a relatively simple process.To remove the old dishrack, simply pull it out and lift the wheels from its track. Set it off the side, and lift the new dishrack. Slide it into its track and make sure it is locked in. If it is gliding in and out smoothly, it has been installed properly.This genuine replacement part is compatible with Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Sears/Kenmore brand dishwashers.

The Leg is an OEM part for LG dishwashers. It serves as a critical base component that elevates the dishwasher body above the floor for proper drainage. Legs are constructed with durable corrosion-resistant materials and adjustable height features to accommodate most flooring types. 

Symptoms of a bad leg can include:

• The dishwasher wobbles or is uneven during operation
• Standing water or improper draining of wash water  
• Visible damage like cracks, bending, or rust affecting stability

Causes of leg failure typically arise from normal wear over extended use of hard flooring. Replacing deteriorated legs restores the appliance's security and balance for optimum performance.

This affordable OEM LG part ensures the dishwasher stays firmly in place during cycles while conveniently adjusting to most installation situations. It provides customers with many more trouble-free years of use. This replacement leg is also compatible with KitchenAid models.

This spray arm bearing supports the dishwasher spray arm so it spins freely for even water distribution and better cleaning coverage. Replacing a worn bearing can reduce spray arm wobble, knocking noises, and uneven wash patterns. What it does:

• Supports and centers the spray arm to allow smooth rotation during cycles
• Helps maintain even water spray for consistent cleaning performance
• Reduces spray arm wobble, rubbing, or knocking noises caused by a worn bearing
• Prevents binding that can lead to reduced spray coverage or intermittent hitting of the tub

• Disconnect power and turn off water supply before starting any repair
• Remove lower rack and detach the spray arm to access the bearing per your model's service instructions
• Press or snap the replacement bearing into place and reassemble parts in reverse order
• Run a short cycle to ensure the spray arm spins freely and there are no leaks

This parts assembly is a pre-packaged set of components used to replace a worn or damaged group of parts in one area of the appliance. Installing the matched assembly helps restore proper fit and reliable operation.

• Replaces multiple small components as a single matched set
• Restores alignment and function in the related mechanism
• Can help with looseness, rattling, poor fit, or intermittent operation
• Built to match original form and connection points for correct fit

• Disconnect power and shut off water or gas before servicing
• Use your model's exploded view/service manual to locate and orient
• Keep track of screws, spacers, and clips; transfer any reusable hardware
• Verify smooth operation before restoring power and normal use

Replacement wheel that guides and supports a sliding rack or drawer, restoring smooth, quiet movement and reducing binding or wandering along the track to help prevent further wear. What it does:

• Replaces a worn, cracked, or missing roller to restore smooth sliding action.
• Helps racks or drawers track straight and reduces grinding or scraping noises.
• Can alleviate sticking, tilting, or uneven movement caused by a damaged wheel.
• Supports proper alignment to reduce stress on tracks and mounting clips.

• Disconnect power and water to the appliance before starting any repair.
• Remove the rack or drawer to access the wheel; inspect the axle/clip for damage before installing.
• Press or clip the wheel into place on the track/axle until it seats securely; reassemble and test sliding action.
• If mounting hardware is damaged, replace the damaged hardware as well for a secure fit.

This twin-wheel caster replaces a worn or broken wheel on compatible portable appliances and carts, restoring smooth rolling and easier repositioning. A fresh caster helps improve stability and reduces dragging that can scuff floors.

• Supports the unit's weight and lets it roll for cleaning or repositioning
• Twin-wheel design helps distribute load and track smoothly
• Common signs of failure: cracked or missing wheel, caster won't swivel, flat spots, unit hard to move or sits unevenly
• Replacing damaged casters reduces wobble and noise when rolling

• Disconnect power and shut off water. Empty the unit as needed before moving.
• Carefully tip or elevate and support the appliance to access the caster; use a helper to avoid injury.
• Remove the retaining fastener/clip, transfer any spacers, and install the new caster in the same orientation.
• After installation, verify all casters are seated, the unit rolls smoothly, and it sits level.