Dishwasher Switch Surface Element Parts

This push button switch assembly replaces a worn or unresponsive control button to restore reliable user input on the appliance. It provides a firm tactile response so commands register correctly at the control panel. What it does:

• Acts as the user-facing push button that completes the control circuit when pressed
• Restores responsiveness when buttons are stuck, intermittently work, or fail to actuate
• Helps eliminate missed starts or unrecognized button presses at the console
• Fits into the control panel and interfaces with the appliance's internal switch contacts

• Disconnect power to the appliance before starting any repair to avoid shock or injury
• Access may require removing the control panel; keep fasteners and trim in a safe place
• Handle connectors gently—disconnect and reconnect wiring harnesses by the plug, not the wires

This heater assembly restores heat production in electric dryers so clothes dry efficiently. It replaces a failed heating element and helps return the appliance to normal drying performance. What it does:

• Heats air passing through the dryer drum so laundry dries during operation
• Replaces a burned-out or open heating element that causes no heat or weak heat
• Addresses long dry times and extended cycles when the element isn't functioning
• Works with the dryer's blower and thermostatic controls to maintain proper air temperature

• Disconnect power at the breaker before starting any repair; this part carries live voltage during operation
• Handle the heating element carefully to avoid bending or damaging the coil
• Inspect fuses, thermostats, wiring, and connectors while replacing the heater to ensure full repair
• Follow the appliance manufacturer's service instructions for disassembly and reassembly

Pressure switch that monitors water level and signals the washer control board when to start or stop filling. Replacing a failing pressure switch can help restore correct fill levels and normal cycle operation. What it does:

• Senses air pressure from the tub and tells the control when the correct water level is reached
• Stops the fill valve once the desired level is detected to prevent overfilling
• Can cause underfilling, overfilling, or failure to advance cycles when faulty
• Works with the washer's control system to ensure proper fill and cycle progression

• Disconnect power to the appliance before starting any repair
• Shut off water supply and relieve any trapped water before accessing components
• Carefully disconnect wiring harness and air tube; note routing for reassembly

A reed switch door sensor that detects when the appliance door is closed so the control can start cycles. Replaces a failed magnetic sensor to restore reliable door-closed detection and normal operation. What it does

• Acts as a magnetic contact that signals the control when the door or lid is closed
• Helps prevent the appliance from starting if the door is open or not fully latched
• Common symptom fix for no-start, intermittent cycle start, or control not recognizing a closed door
• Works as the electrical switching element in the door/detector assembly

• One reed switch (single replacement sensor)

• Disconnect power to the appliance before replacing the part to avoid shock or damage
• Handle the switch and wiring gently; avoid bending or stressing terminals and solder joints
• Locate and access the door/detector area per your service manual or tech sheet; confirm connector orientation before installing

A replacement selector switch that restores user control of temperature and function selection on compatible ranges and ovens. Designed to match OEM fit and restore reliable control response for common cooktop/oven functions. What it does

• Selects oven or burner functions when you turn the control knob.
• Routes user input to the appliance control circuits so the unit responds correctly.
• Commonly replaces worn or failed switches that cause unresponsive controls, no function selection, or intermittent operation.
• Helps stop erratic behavior like controls that click without changing settings.

• Disconnect power to the appliance before beginning any repair.
• Replacement typically requires removing the control panel and knob; handle wiring and connectors carefully.
• Verify knob orientation and switch alignment during reassembly.

A replacement switch assembly that restores proper electrical control for compatible Frigidaire appliances. Replaces a worn or faulty switch to help restore reliable on/off and cycle control for the affected function. What it does:

• Acts as the electrical on/off or selector switch for the appliance control circuit
• Restores reliable contact when original switch is intermittent or unresponsive
• Commonly used when the appliance won't start, specific functions won't engage, or controls feel loose
• Fits into the original control panel location and connects to existing wiring harness

• Disconnect power (unplug appliance or switch off breaker) before inspecting or replacing the switch
• Access may require removing a control panel or trim—keep fasteners and wiring orientation noted
• Handle terminals carefully to avoid bending or damaging contacts; confirm secure wiring connections before restoring power

This float assembly helps detect and control water level inside the appliance to prevent overfilling and enable normal drain cycles. It replaces a worn or stuck float to restore reliable water sensing and operation. What it does:

• Rises with water level to trigger the appliance's water-level detection system
• Helps stop overfilling and reduces risk of leaks or continuous fill
• Commonly related to symptoms like persistent fill, frequent draining, or error codes tied to water level
• Works as the mechanical sensing element in the water management system

• One float assembly

• Disconnect power and water supply before starting any repair
• Verify correct alignment and free movement of the float after installation
• Reassemble panels and run a short test cycle to confirm proper operation

This right switch breakwater helps position and protect the dryer control switch assembly, keeping the switch secure and preventing rubbing or shorting. It restores stable switch alignment for reliable control operation. What it does:

• Holds the right control switch in place to prevent movement and wear
• Protects the switch from contact with adjacent components that can cause sticking or intermittent operation
• Helps stop rattling or vibration-related noise from the control area
• Supports proper button/knob actuation for consistent user input

• One right switch breakwater

• Intended for use in the dryer control area; inspect surrounding parts for related damage
• Disconnect power before servicing to avoid shock or accidental startup
• Use basic hand tools; do not overtighten fasteners to avoid cracking the plastic
• Replace damaged switches or mounting hardware together for best results

This infinite burner switch controls heat output for a cooktop burner so you can adjust cooking temperature smoothly. Replaces a worn or failed control to restore variable heating response on compatible ranges. What it does:

• Regulates burner heat by varying power to the surface element for precise temperature control
• Commonly replaces switches that cause a burner to stay cold, not heat evenly, or only work at one setting
• Helps stop clicking, erratic heating, or loss of low/high heat range when the original switch fails
• Works as the user control interface behind the cooktop knob (requires matching shaft/terminal configuration)

• Disconnect power to the appliance before starting any repair to avoid shock or injury
• Verify shaft style and terminal layout match the original switch for proper fit and function
• Handle surrounding trim and glass cooktop pieces carefully to prevent damage during removal