Refrigerator Icemaker Water Valve Parts

The RFID Water Filter Board is an OEM part for GE refrigerators. It is an electronic component located inside the filter housing that reads the RFID chip in Genuine GE water filters. The board monitors filter life and provides notification when it's time for a replacement. 

Symptoms of a bad RFID water filter board include:

• Inability to detect when a new filter is installed  
• Error codes or filter life indicators not functioning properly
• Water dispenser not working or dispensing unfiltered water

Causes may include damage from moisture or leaks over time, failure of electronic components, or normal wear and tear.

This replacement board is also compatible with Hotpoint, RCA, and some Kenmore models.

This single water inlet valve regulates water flow into your refrigerator. When energized, it opens to supply water and closes to stop it—restoring consistent filling for ice production and any water dispensing your model supports.

• Controls on/off water flow to the ice maker and/or dispenser (model dependent)
• May resolve no ice, slow or hollow cubes, or a dispenser that won't dispense or is weak
• Can correct intermittent dripping or leaks at the rear caused by a valve that won't fully close
• A humming valve with little or no water flow can indicate a failed solenoid or internal blockage

• Unplug the refrigerator and shut off the household water supply before servicing
• Place a towel/container to catch residual water; relieve line pressure if possible
• Note wire and tube locations; transfer to the new valve and seat/tighten fittings securely
• Restore water and power, then check all connections for leaks and run a test fill

The Icemaker is an OEM component for Whirlpool refrigerators. It is responsible for automatically producing batches of ice using a process of freezing water into cube form. The icemaker works closely with the freezer compartment and water supply line to fulfill its ice-making function.

Causes of a bad icemaker can include issues with the refrigeration system like improper temperatures, clogging or damage preventing water flow, or component malfunctions within the icemaker itself. 

Symptoms of a faulty icemaker are:

• Failure to produce ice cubes
• Sparse or chunky/oddly shaped ice output 
• Leaks or water pools in the freezer
• Strange noises or smells coming from the icemaker area
• Error codes displayed regarding icemaker performance  

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore refrigerator models.
 

This Whirlpool Water Filter Housing is an OEM part for specific Whirlpool refrigerator models. It plays a role in accommodating the water filter, ensuring clean and safe drinking water is dispensed from your fridge. 

A faulty housing may lead to water leaks, improper filter fitting, or reduced effectiveness in water filtration, affecting the quality of the water dispensed.

Symptoms of a bad water filter housing include:

• Leaking water near the filter area.
• Difficulty in installing or removing the water filter.
• Unusual noise or vibration when the water dispenser is used.
• The water filter does not lock in place securely.
• Noticeable decrease in water flow from the dispenser.

This genuine Whirlpool OEM replacement part is compatible with Maytag, Jenn-Air, and Kenmore models.
 

The Water Filter Bypass is an OEM replacement part for Frigidaire refrigerators. It provides an alternative water supply route to bypass the refrigerator's built-in water filtration system. The bypass allows refrigerator water and ice dispensers to operate without water flowing through the installed filter cartridge. 

Causes of a malfunctioning bypass can include mineral buildup inhibiting proper operation of the bypass valve, worn seals or O-rings not providing a tight seal or physical damage.  

Symptoms include:

• Inability to bypass the water filter when needed  
• Leaks from the bypass area
• The filter bypass not functioning or engaging properly

This OEM replacement is also compatible with refrigerator brands like Electrolux, Gibson, Kelvinator, and select Kenmore models.

This replacement ice cube pan holds and organizes ice in your refrigerator's freezer. Replacing a cracked or warped pan restores clean, contained ice storage and smoother access or dispensing, depending on your model's design. What it does:

• Collects and stores ice produced by the icemaker or manual trays
• Keeps cubes contained and easy to access; fits designated guides in the freezer
• Helps ensure proper ice access or dispensing on applicable models
• Typical symptoms: cracked bin, broken tabs, bin won't seat, ice spilling or clumping

• 1 ice cube pan/bin

• Disconnect power to the refrigerator and turn off the icemaker before starting
• Remove the old pan and empty any remaining ice
• If your model reuses a drive/crusher or other hardware, transfer those parts from the original pan as directed for your unit
• Seat the new pan fully in its tracks/coupler, restore power, and allow normal ice production

This automatic refrigerator ice maker assembly molds water into cubes and ejects them into the bin, restoring steady ice production. Replace a failed icemaker that no longer cycles, fills with water, or ejects cubes reliably.

• Freezes water in its mold and harvests finished cubes into the ice bin
• Controls the fill, freeze, and harvest sequence for automatic ice making
• Works with the refrigerator's controls to start/stop ice production as designed
• Common symptoms: no ice or low ice volume; won't fill; cubes won't eject; unit stalled mid-cycle

• Disconnect power and shut off the water supply before servicing
• Remove the ice bin; loosen mounting screws; unplug the wire harness; lift out the old assembly
• Transfer any brackets, covers, or fill cup from the original unit if required
• Align with the fill tube; secure screws; reconnect harness; restore power and water; allow up to 24 hours for full ice production

The Ice Container is an OEM part for Whirlpool refrigerators. It is responsible for holding and dispensing ice from the icemaker into the dispenser chute.

The ice container ensures the proper storage and convenient access to ice whenever you need it. It is designed to provide a reliable ice storage solution.

A bad ice container assembly can occur due to wear and tear over time or damage to the container or its components. If you notice symptoms such as the ice not dispensing properly, leaks from the dispenser area, or a broken or cracked ice container, it may be time to replace this part.

Symptoms of a bad ice container include:

• Improper dispensing of ice
• Leaks from the dispenser area
• Broken or cracked ice container

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This refrigerator water filter mount secures the filter head/housing to the liner so the cartridge seats squarely and seals. Replace a cracked or loose mount to restore a snug fit and help prevent leaks or vibration.

• Holds the water filter housing firmly in place
• Aligns the cartridge for proper engagement with the filter head
• Helps maintain a watertight seal at the filter connection
• Common symptoms: filter won't lock in or sits crooked, drips around the filter area, difficulty installing/removing the filter, or rattling from a loose housing

• Disconnect power and shut off the water supply; dispense water to relieve line pressure
• Remove the filter and any cover/trim to access the mount; retain existing screws for reuse
• Install the new mount and tighten screws gently to avoid cracking plastic
• Reinstall the filter, restore water and power, flush the dispenser, and check for leaks

This dual-solenoid water valve controls water flow to the refrigerator dispenser and icemaker, restoring fill and dispensing when the machine calls for water. Replaces a worn or leaking valve to stop drips and restore normal water delivery. What it does:

• Opens and closes water flow to the icemaker and dispenser when energized
• Stops water flow when the appliance signals a fill cycle is complete
• Commonly replaced for leaks, no water to dispenser, or no water to the icemaker
• Works with the refrigerator's water supply line and wiring harness

• Turn off water supply and disconnect power before starting any repairs
• Inspect and replace any worn inlet tubing or mounting hardware as needed

This PurePour Connect PWF-2 refrigerator water filter installs in the factory filter housing to help deliver cleaner, better-tasting water and ice. Replacing a saturated filter restores dispenser flow and keeps your refrigerator's water system working as intended. What it does

• Filters the incoming water for the dispenser and ice maker
• Routine replacement (about every 6 months or when the indicator turns on) helps maintain taste and flow
• A clogged/expired filter can cause slow dispensing, small/empty ice, or a "Change Filter" alert
• Designed for refrigerators that use the PurePour Connect PWF-2 filter style

• One refrigerator water filter (single cartridge)

• Turn off the water supply and dispense water to relieve pressure; place a towel to catch drips
• Insert the new filter fully and lock it in place; check for leaks
• Flush several pitchers of water after installation and reset the filter status light per your model

This water filter manifold is the assembly the MWF cartridge locks into, sealing the connection and routing water through the filter to your dispenser and icemaker. Replacing a worn manifold can stop leaks and restore normal water flow. What it does:

• Holds and seals the MWF water filter cartridge
• Directs filtered water to the dispenser and icemaker
• Can help resolve leaks at the filter head, slow/low flow, or no water/ice
• Addresses issues where the filter won't seat or keeps popping out

• 1 water filter manifold assembly

• Unplug the refrigerator and shut off the water supply; dispense water to relieve pressure
• Keep a towel handy for residual water and take photos to note tube routing before removal
• Fully seat tubing and connections during reassembly; ensure the filter locks in securely
• Restore water and power, then check for leaks and run water to purge air

Reduces contaminants and removes chlorine taste and odor to deliver clean and healthy water. It is certified by NSF International against NSF/ANSI Standard 42, Standard 53, and Standard 401 to remove other contaminants such as asbestos, atrazine, benzene and mercury. Easy push and twist install that requires no special tools. Filter should be replaced every 6 months or 200 Gal. to maximize contaminant reduction. Operating Pressure: 30-100 psi. Operating Temperature: 40-100°F. Flow Rate: .5 gpm.

This cup fill spout directs the dispenser's water stream cleanly into a cup. If the spout is cracked, clogged, or warped, it can cause splashing or persistent drips—replacing it restores a steady, controlled flow.

• Funnels water from the dispenser outlet for a smooth, targeted stream
• Helps reduce splashing and water running down the door
• Can resolve drips after dispensing, erratic spray, or a damaged/missing spout
• Visible cracks, mineral buildup, or deformation are common failure signs

• Unplug the appliance and turn off the water supply
• Open the dispenser area and release the spout from its locking tabs or clips
• Seat the new spout fully; transfer any seals from the old part if applicable
• Restore water and power, then test for proper flow and leaks

The Inlet Valve is an OEM replacement part for Whirlpool refrigerators. It is responsible for controlling the water flow into the refrigerator, enabling essential functions such as ice making and water dispensing.

Symptoms of a bad inlet valve include:

• No water flow to the ice maker or water dispenser
•  Leaks around the valve or connected water lines
• Constant running or dripping water sounds
• Frozen water lines due to improper valve shutoff

Causes of a bad inlet valve can include sediment buildup, wear and tear over time, water pressure issues, or electrical malfunctions that prevent the valve from opening and closing correctly. 

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.