Refrigerator Defrost Drain Pan Parts
Genuine Frigidaire part
By: Frigidaire
Part Number: 240597220
The Temperature Sensor (10K NTC) is an OEM replacement part for Frigidaire refrigerators. This sensor monitors the internal temperature of the refrigerator or freezer compartment, sending signals to the control board to regulate cooling cycles. It ensures the appliance maintains the correct temperature for optimal food preservation.
Temperature sensors can fail due to wear over time, electrical issues, or exposure to moisture. A malfunctioning sensor can cause inaccurate temperature readings, leading to improper cooling or freezing.
Symptoms of a bad temperature sensor include:
- Fluctuating or incorrect temperatures in the refrigerator or freezer
- Food spoiling faster than expected or freezing inappropriately
- Error codes related to temperature regulation
- The refrigerator running continuously or cycling too often
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
S or 5 e ce later that changes to s or 5 y ce Amritt V. • Yorkyown , VA • October 21, 2017
Walk into the kitchen on 21 Sep. Eight year old Frigidaire refrigerator appears to be short cycling, controls are nonfunctional. Unplug it for a few minutes, plug it back in, appears to return to normal function. Return to kitchen half hour 45 minutes later it's short cycling again. Panel has codes on it (S or 5 E CE, later that changes to S or 5 Y CE). Research of codes says replace main board and control board. Not sure where this main board is. 22 Sep call appliance repair. "Soonest...
Read more
More
$10.95
- Compare At:
-
$13.14
- You Save:
-
$2.19
Genuine Frigidaire part
By: Frigidaire
Part Number: 242044008
Replaces a failed defrost heater in the freezer section to clear frost from the evaporator coils. Restores normal airflow and temperature recovery when ice buildup causes warm spots, poor cooling, or fan noise from blades hitting frost.
What it does
- Heats the evaporator during defrost to melt accumulated ice.
- Helps prevent airflow blockages that lead to warm fridge temps.
- Reduces heavy frost on coils and around the fan shroud.
- Addresses symptoms like rapid frost return, ice-bound coils, or noisy fan contact.
What’s included
One defrost heater assembly.
Install notes
- Unplug the refrigerator before servicing.
- Access the evaporator cover in the freezer; carefully remove ice as needed to avoid damaging fins.
- Note wire routing/terminal orientation; transfer to the new heater one-for-one.
- After reassembly, run a test cycle and monitor temps once the unit completes a full defrost.
Do-It-Yourself Stories from Customers like You
The thermostat or defrost heater coil went bad. Michalene W. • Beulaville , NC • April 16, 2019
I chose to replace both parts so I wouldn't have to go back into the freezer. I used only a screw driver, pliers and the gas lighter to heat the wire connector sleeves. I watched the available do it yourself videos and was done in less than 30 minutes. It has worked perfectly since. No more Ice build up in the freezer. I had no trouble finding the exact parts I needed on your website.
Read more
More
$28.95
- Compare At:
-
$43.50
- You Save:
-
$14.55
Genuine Ge part
By: Ge
Part Number: WR32X10836
The Pan Snack Lower is an OEM part for GE refrigerators. This component is designed to store snacks and other small items in the lower section of the refrigerator, offering a convenient and organized storage solution. The pan slides in and out smoothly, making it easy to access your snacks and keep them fresh.
Causes of a bad pan snack lower can include physical damage from overloading or mishandling, cracks or breaks from wear and tear over time, or issues with the sliding mechanism that prevent it from operating correctly. A damaged or malfunctioning pan can reduce storage efficiency and accessibility.
Symptoms of a bad pan snack lower include:
- Difficulty sliding the pan in and out
- Cracks or breaks in the pan material
- The pan not staying in place or falling out
- Reduced storage efficiency within the refrigerator
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Our original snack pan was cracked. Lavonne Latham H. • Lincoln , NE • October 16, 2021
Your new part fits perfectly! It's SO nice to have the frig in full operation again.
Read more
More
$73.62
- Compare At:
-
$87.61
- You Save:
-
$13.99
Genuine Frigidaire part
By: Frigidaire
Part Number: 240383901
The Door Bin is an OEM part for Frigidaire refrigerators. It is a storage compartment designed to fit securely onto the interior of the refrigerator door, providing convenient and easily accessible storage space for items like beverages, condiments, or other small food items.
Causes of a bad door bin can include cracks or damage due to impact or mishandling, warping or discoloration from exposure to heat or moisture, or wear and tear on the hinges or mounting mechanisms that attach the bin to the door.
Symptoms of a faulty door bin may include:
- Cracks, chips, or other visible damage
- The bin not fitting properly or securely onto the door
- Leaks or spills due to a poorly sealed or damaged bin
- Difficulty opening or closing the bin
- Obstructed access to the bin due to misalignment or warping
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
This is the 2 liter bin. For the gallon door bin use part number 240383801.
Do-It-Yourself Stories from Customers like You
2 door racks cracked Lisa G. • Kulpmont , PA • January 18, 2015
Found AppliancePartsPros.com through internet search. I put in my refrigerator model number and it brought up all the parts for my Frigidaire and I clicked on door parts and walah! Ordered Wednesday night and had the parts on Friday and were an exact fit.This place is great! I also prior replaced a meat drawer tray and a glass shelf plastic white strip.
Read more
More
$48.95
- Compare At:
-
$58.74
- You Save:
-
$9.79
Genuine Ge part
By: Ge
Part Number: WR50X10065
The Defrost Thermostat is an OEM part for GE refrigerators. This component is essential in regulating the defrost cycle, ensuring that the refrigerator's evaporator coils do not become frosted over, which can impede airflow and cooling efficiency. The thermostat monitors the temperature of the coils and activates the defrost heater when necessary to melt any accumulated frost.
Symptoms of a failing Defrost Thermostat include:
- Excessive frost buildup on the evaporator coils
- The refrigerator or freezer compartments being too warm
- The refrigerator running continuously without cycling off
- Water leakage inside the refrigerator due to melting frost
- Unusual noises as the compressor overworks to maintain temperature
Causes of a bad defrost thermostat can include normal wear and tear over time, exposure to moisture that can cause electrical issues, or a failure in the internal sensing mechanism that prevents accurate temperature regulation.
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Refrigerator would not cool Desiree C. • Youngsville , NC • March 14, 2015
The repair went great with the guidance from your website and the parts that we purchased! also the video was great!
Read more
More
$57.62
- Compare At:
-
$68.57
- You Save:
-
$10.95
Genuine Frigidaire part
By: Frigidaire
Part Number: 241511701
The Door Bin is an OEM part for Frigidaire refrigerators. This bin attaches to the inside of the refrigerator door, providing convenient storage for smaller items like condiments, beverages, and jars.
Common causes of a bad door bin include regular wear and tear from frequent use, cracking or breaking due to overloading, or impact damage from items being placed in or removed from the bin.
Symptoms of a bad door bin include:
- Cracks or breakage in the plastic
- The bin not staying securely in place
- Difficulty in holding items due to instability
- Discoloration or warping of the bin material
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Broken lower door refrigerator shelf Nili N. • Vista , CA • August 12, 2018
I ordered the part online, which arrived in a few days. Installation took about 60 seconds.
Read more
More
$51.75
- Compare At:
-
$61.58
- You Save:
-
$9.83
Genuine Frigidaire part
By: Frigidaire
Part Number: 240534801
The Freezer Door Shelf is an OEM part for Frigidaire side-by-side refrigerators. It provides adjustable storage within the freezer compartment for easy access to items. The shelf measures about 24 inches long and 5 inches wide.
Causes of a bad freezer door shelf can include wear over time from repeated loading/unloading that causes scratches or cracks in the lightweight plastic. Exposure to slushy spills may promote material breakdown if not cleaned promptly.
Symptoms of a bad freezer door shelf include:
- Sagging or inability to bear weight of frozen packages
- Breakage leaving smaller pieces that could fall
- Discoloration compromising appearance and sanitation
- Shelving that won't stay level or properly positioned
This genuine Frigidaire shelf is also compatible with Electrolux and Kenmore models.
Do-It-Yourself Stories from Customers like You
Missing parts for my fridge Joanne S. • Tullahoma , TN • February 05, 2022
I ordered three parts for my fridge. The entire process was so easy! I entered my model number and quickly found the parts I needed! Submitted the order and the parts arrived the Next Day! I was very happy!
Read more
More
$32.95
- Compare At:
-
$39.21
- You Save:
-
$6.26
Genuine Samsung part
By: Samsung
Part Number: DA47-00244U
The Refrigerator Defrost Heater Metal Sheath is an essential component for maintaining the efficiency of your refrigerator. This genuine OEM part is specifically designed to work seamlessly with Samsung refrigerator models, ensuring a perfect fit and reliable performance. The HEATER METAL SHEATH plays a crucial role in the defrosting process by evenly distributing heat to prevent ice buildup. This helps maintain optimal cooling levels and extends the lifespan of your appliance. Installing the Refrigerator Defrost Heater Metal Sheath can resolve issues related to excessive frost accumulation, leading to better energy efficiency and consistent temperature control. Its durable construction ensures long-lasting functionality, providing you with peace of mind and reducing the need for frequent repairs. Whether you are replacing a faulty heater or upgrading your refrigeratorGÇÖs performance, this genuine OEM part offers a dependable solution to keep your Samsung refrigerator running smoothly. Enhance your refrigerator's performance with the Refrigerator Defrost Heater Metal Sheath and enjoy a more efficient and reliable appliance.
Do-It-Yourself Stories from Customers like You
Coils freezing up, not cooling. Dave D. • Cranberry Twp , PA • October 07, 2018
Replaced sensors and heater element. We'll see if that fixes the problem. It usually happens every 3 months.
Read more
More
$108.45
- Compare At:
-
$129.06
- You Save:
-
$20.61
Genuine Frigidaire part
By: Frigidaire
Part Number: 242120508
The Crisper Bin Cover is an OEM part for Frigidaire refrigerators. It serves as the cover for the crisper bin, providing a flat surface for additional storage while helping to maintain the optimal humidity levels within the bin. This crisper cover measures approximately 26 x 19 inches.
Causes of a bad crisper bin cover can include regular wear and tear, heavy items causing cracks or breakage, or accidental damage from mishandling during cleaning or reorganization. Over time, these factors can compromise the functionality and appearance of the cover.
Symptoms of a bad crisper bin cover include:
- Cracks or visible damage on the cover
- The cover not fitting properly or securely over the crisper bin
- Difficulty in opening or closing the crisper drawer due to an ill-fitting cover
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
I had leaned on and cracked the bottom shelf of my refrigerator which was fairly old Michael S. • Paxtonville , PA • October 29, 2019
I called Appliance Parts Pros.com and talked to one of their representatives. She was very helpful as I had some concerns about the size of the shelf. She double-checked to ensure that the shelf would fit my refrigerator. She also assured me that if by chance, it did not fit or if anything happened to it within a year, returning would be made easy. The part arrived super quickly and fit perfectly. I have dealt with this site in the past and have always been very pleased.
Read more
More
$113.72
- Compare At:
-
$135.33
- You Save:
-
$21.61
Genuine Ge part
By: Ge
Part Number: WR32X10340
The Lower Crisper Drawer is an OEM part for GE refrigerators. It is designed to provide a dedicated space for fruits and vegetables. This drawer helps in maintaining the right humidity levels to extend the freshness and life of your produce. With its clear design, it allows for easy visibility of its contents, enabling quick access without the need to open the drawer fully.
A malfunctioning or damaged crisper drawer can result from several factors, including overloading the drawer beyond its capacity, which can lead to cracks or breaks, or regular wear and tear over time. Additionally, mishandling during cleaning or storage adjustments can also cause damage.
Symptoms of a bad Lower Crisper Drawer include:
- Difficulty in sliding the drawer in or out
- Cracks or damage that can lead to improper sealing or difficulty in maintaining humidity levels
- Visible warping that affects the drawer's fit within the refrigerator
This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
Do-It-Yourself Stories from Customers like You
Broken vegetable drawer Jeffery D. • Montague , MI • August 18, 2015
I ordered a replacement drawer on a Friday afternoon and it was was delivered Saturday morning less than 24 hours later.
Read more
More
$75.67
- Compare At:
-
$90.05
- You Save:
-
$14.38
Genuine Ge part
By: Ge
Part Number: WR72X21684
The Snack Pan Rail is an OEM part for GE refrigerators. It provides support and a sliding track for the snack pan or deli drawer, allowing it to move smoothly in and out for easy access to stored items. It measures approximately 14 inches in length and 2 inches in width.
You should replace the snack pan rail if it becomes worn out or damaged. Causes of a bad snack pan rail can include repeated use, excessive weight in the snack pan causing strain, or damage from accidental impacts during loading or cleaning.
Symptoms of a bad snack pan rail include:
- The snack pan or deli drawer not sliding smoothly
- The drawer becoming stuck or difficult to open and close
- Visible cracks or breaks in the rail
- The rail detaching from its mounting points
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Meat drawer rail had broken off Marisa M. • Mendon , MA • August 25, 2019
I ordered the replacement rail. It's an exact match! It came quickly and was easily put in.
Read more
More
$7.37
- Compare At:
-
$8.36
- You Save:
-
$0.99
Genuine Frigidaire part
By: Frigidaire
Part Number: 240331502
The Door Rack Support is an OEM part for Frigidaire refrigerators. It is designed to support the door rack or bin, providing a secure mounting point that helps hold items in place within the refrigerator door. This support piece ensures that the door racks remain stable, allowing you to store and organize items like bottles, jars, and condiments efficiently.
Causes of a bad door rack support can include regular wear and tear from frequent use, overloading the door racks with heavy items, or accidental damage from impacts or mishandling. Over time, these factors can cause the support to crack, break, or lose its ability to hold the door rack securely.
Symptoms of a bad door rack support include:
- Door racks sagging or falling out of place
- Difficulty in fitting or securing the door racks
- Visible cracks, breaks, or damage to the support
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Need new door racks Christopher Z. • West Bend , WI • March 21, 2015
Put racks to together and put into fridge
Read more
More
$6.95
- Compare At:
-
$8.20
- You Save:
-
$1.25
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10568041
The Crisper Shelf Frame is an OEM part for Whirlpool side-by-side refrigerators. It provides sturdy tracked support for organizing vegetables and other produce items in the crisper drawers. The glass and center support are NOT included and must be ordered separately.
Causes of a bad crisper shelf frame can include heavy loads causing cracks or breaks, exposure to moisture leading to warping, or accidental impacts during loading and unloading of groceries.
Symptoms of a bad crisper shelf frame include:
- Cracks or breaks in the frame
- Difficulty sliding crisper drawers in and out
- Items stored on the shelf are unstable or fall through
- The frame not fitting securely in its designated space
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
This part doesn't have any support across the back in the center and it finally broke too bad to use Keith O. • Springfield , MO • January 11, 2019
So this is a poor design in the first case. Not having a center support in the back almost guarantees a failure there eventually. I kludged together a support in my original more than a year ago, but finally the part broke too bad to limp along with anymore.
This is the part I needed. That being said, be very attentive about the fact that it's not the entire shelf assembly.
There is a metal support across the front of the frame that is not included. The trim above the drawers, and the...
Read more
More
$87.75
- Compare At:
-
$105.30
- You Save:
-
$17.55
Genuine Frigidaire part
By: Frigidaire
Part Number: 242079901
The Door Bin is an OEM replacement part for Frigidaire refrigerators. The door bin is responsible for organizing smaller items and optimizing interior space utilization. It measures approximately 5" depth x 12 1/2" width x 3" height.
Causes of a bad door bin can include damage such as cracks or breaks in the plastic, broken adjustable shelves, or issues with the mounting brackets that secure it inside the refrigerator door.
Symptoms of a bad door bin include:
- Items falling out of the bin due to structural integrity issues
- Difficulty accessing storage areas due to broken shelving
- The bin not sitting securely inside the door
This genuine Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Almost smooth Christiana H. • Puyallup , WA • April 28, 2020
I just purchased a new house and there are little things that need to be repaired. I think I'm pretty handy for a woman, but finding parts is the hard part. The fridge in my home was missing a handle and the bin on the inside was cracked down the middle. It was a simple fix for the bin. A quick clip out and snap in.
Read more
More
$67.39
- Compare At:
-
$80.87
- You Save:
-
$13.48
Genuine Frigidaire part
By: Frigidaire
Part Number: 242071301
The Door Bin is an OEM part for Frigidaire refrigerators. This bin is designed to fit securely on the refrigerator door, providing convenient storage for bottles, jars, and other items. It helps maximize the use of space within the refrigerator, allowing for better organization and accessibility of frequently used products.
Over time, door bins can become damaged or worn out due to regular use, overloading, or accidental impacts. Common causes of a bad door bin include cracks, breaks, or the plastic becoming brittle and snapping off.
Symptoms of a bad door bin include:
- Cracks or breaks in the plastic
- Difficulty in securely attaching the bin to the door
- Items falling out of the bin
- Reduced storage capacity on the refrigerator door
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
The ice maker tray cracked and the water would leak into the tray turning the ice into one big block Henry C. • Midlothian , VA • January 31, 2015
Replaced icemaker tray assembly. The new assembly looks stronger than the original materials.
Read more
More
$70.32
- Compare At:
-
$84.38
- You Save:
-
$14.06
Genuine Frigidaire part
By: Frigidaire
Part Number: 240358928
The Shelf - "Spill-Safe" is an OEM part for Frigidaire refrigerators. This shelf is designed to contain spills and prevent liquids from leaking onto other shelves or the bottom of the refrigerator, helping to maintain cleanliness and order within the appliance.
Over time, heavy loads, accidental impacts, or temperature fluctuations can cause the shelf to weaken or break.
Symptoms of a bad shelf include:
- Visible cracks or breaks in the shelf
- Liquids leaking through the shelf
- Difficulty in fitting the shelf securely in place
- The shelf not supporting weight properly
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Needed a shelf with sliders for my deli drawer Evelyn B. • North Myrtle Beach, , SC • September 25, 2014
I chated with a man on line and he had what I needed the picture did not show the sliders so I wasn't sure if it was the right one he assured me it was, got it in a few days very pleased with ApplianceParts
Read more
More
$117.95
- Compare At:
-
$141.54
- You Save:
-
$23.59