205C-2981-Pod-112 Parts

This small mounting screw secures the appliance's timer to its bracket or control console. It replaces missing or stripped hardware to keep the timer stable, properly aligned, and operating smoothly when you turn the control knob.

• Fastens the timer assembly securely to its mounting bracket or console
• Prevents shifting and vibration that can make the control feel loose or wobbly
• Helps maintain proper alignment of the timer shaft/knob
• Ideal replacement when original hardware is missing or threads are damaged

• Disconnect power before servicing; shut off gas if applicable
• Access the control console and support the timer while removing/reinstalling hardware
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening into plastic or thin metal
• Replace screws one at a time to keep the timer aligned

A cam sleeve that supports and guides the cam on its shaft to keep the cam-driven mechanism moving smoothly. Replacing a worn sleeve helps restore correct alignment and reduces binding or intermittent movement. What it does

• Centers and stabilizes the cam on its shaft for reliable engagement.
• Prevents metal-on-metal wear between the cam and shaft.
• Helps eliminate binding, wobble, or uneven operation caused by a worn sleeve.
• Common symptom of failure: noise, sticking, or irregular movement from the cam-driven mechanism.

• Disconnect power to the appliance before beginning any repair.
• Access typically requires removing the appropriate service panel; follow the model service manual.
• Inspect mating cam and shaft for wear; replace any damaged components.
• Reassemble panels and verify proper operation before returning the appliance to service.

A replacement thrust bearing that supports the washer transmission shaft to reduce axial wear and help the gearbox rotate more smoothly. Use this bearing to address noisy transmission operation and reduce metal-on-metal wear when the original is worn. What it does:

• Supports axial load on the transmission/gearcase shaft to reduce friction and wear
• Helps prevent grinding, scraping, or other metal-on-metal noises from the gearbox
• Can reduce rough or noisy spin and improve agitation when a worn bearing is the cause
• Helps maintain proper alignment of transmission components for smoother operation

• Disconnect power and water supply and drain the washer before beginning any work.
• Replacement requires accessing the agitator/gearcase per the OEM service manual and may involve transmission/gearcase disassembly.
• Inspect nearby seals, fasteners and other bearings while servicing; replace damaged parts to avoid premature failure.

Sometimes known as a chain tensioner, this kit is used to adjust the bar of a chainsaw, pruner, or pole saw to increase or decrease the amount of tension in the chain. Having an overly tense chain can cause friction with the bar, which could lead to an engine fire. A chain that is too loose has a chance of kicking back or even losing the chain mid-use, which would be incredibly dangerous. Chains naturally become looser over time, so be sure to regularly check the status of the chain. Having the right amount of tension is critical for the saw to work properly. Making adjustments is easy with our genuine OEM bar adjustment kit sourced straight from the manufacturer. Simply remove the clutch cover and find the adjustment assembly in the cover. Remove it and thread the new chain tensioner onto the assembly. Reassemble the clutch cover and be sure to line up all the corresponding parts. Compatible with Craftsman, Husqvarna, Poulan, and Poulan Pro. This part is shipped individually and only a screwdriver is needed to make this repair.

A fuel line fitting connects two separate sections of the fuel line. Over time and continued use, even durable fuel lines can become cracked, split, or broken, leading to leaks and the need for repair. If you have a fuel line that is separated or severely damaged, a fuel line fitting can be used to make a simple repair that can save you time and money. Depending on where in the equipment the damaged fuel line is, the repair steps can vary. Several fuel line fittings may be needed depending on the severity of the equipment’s damage. This repair will require a nut driver, forceps, a pair of pliers, screwdrivers, and a socket set to complete. This plastic fuel line fitting is compatible with numerous small engines for lawn and garden maintenance like leaf blowers, hedge trimmers, or chainsaws that are manufactured by many brands, like Husqvarna, Jonsered, Poulan, and Weed Eater. This fuel line fitting is a genuine OEM part.

This replacement part is a gasket kit intended for use in many types of lawn equipment including chainsaws, trimmers, blowers, and edgers. This is a genuine replacement part made by Husqvarna. Gasket kits are used inside the carburetor. A faulty gasket kit can cause the carburetor to not work or run slow. A new gasket kit might be needed if the current one is broken or damaged in any way. The user may notice the carburetor not working as well which might be due to the gasket. It is not unusual for this part to require replacement after years of normal use. Be sure the appliance is completely powered down and cooled off before attempting to replace this part. For more detailed instructions on how to replace this specific part, please reference the user guide.This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with various types of lawn equipment made by Husqvarna.

This is an authentic replacement part for the chain catcher used on chainsaws. The chain catcher is an important safety feature. In the event that the chainsaw chain becomes loose from the track or breaks, the chain catcher keeps it from sailing off the guide bar. The chain catcher is made from metal and it tends to be very durable. However, corrosion and other types of damage may prevent it from being effective. If the chain catcher is damaged or if it is lost, it should be replaced before using the chainsaw again. This is a genuine OEM replacement chain catcher that is sold individually. The screw used to secure the catcher to the chainsaw is sold separately. Buyers may want to buy the parts at the same time. This piece is specifically for use with chainsaws. Compatible brands include Husqvarna, Craftsman, Poulan, and Poulan Pro. When purchasing the chain catcher, buyers must be sure it is the correct option for their make and model.

Known as the primer bulb, this replacement part makes it easy for the engine to start. Responsible for circulating fuel through the carburetor, the purge bulb removes air out of the lines and allows the carb to have a new fuel charge before a start. The bulb may harden and crack over time, so it needs to be replaced to prevent an air leak. This is a genuine OEM part that works on different models of gas chainsaws from AYP, Craftsman, Poulan, and Husqvarna. This component is sold individually and comes with two screws.

An air filter keeps out contaminants like grass clippings, pollen, dust, and more from many components of an engine. Air filters can suffer from a buildup on their surface over time that causes them to become less efficient. If your air filter is clogged, the right amount of air might not reach the carburetor, causing inefficiency in mixing the air with gas to create combustible fuel for your engine. If the engine will not start or runs rough, check the air filter of the carburetor and any other air filters on the machine. This repair may require a nut driver, a pair of pliers, screwdrivers, and a socket set to complete. This replacement should be easy and only take a short time. This air filter will fit a variety of different products, which means that repair steps will vary according to the machinery you intend to repair. This simple fix could save you from spending much more on a professional repair or total replacement of your equipment. This air filter is compatible with Craftsman, Husqvarna, and Poulan brand engines. It is a genuine OEM part.

Kit contains two 10 feet inlet hoses.

This motor shield protects and secures the appliance motor assembly, helping block debris and contact with nearby components so the motor can run reliably. It's a direct-fit replacement for a damaged or missing motor shield. What it does

• Shields the motor from debris and foreign objects that can cause rubbing or obstruction.
• Helps secure and position the motor within the cabinet to maintain proper alignment.
• Reduces risk of contact between the motor and other parts that can cause noise or wear.
• Replacing a cracked or missing shield can prevent recurring motor issues and reduce abnormal sounds.

• Disconnect power to the appliance before beginning any repair.
• Use basic hand tools; avoid forcing fasteners or damaging adjacent components.
• Wear gloves to protect against sharp edges on the shield or mounting area.

Rear panel pad cushions and insulates the appliance's rear cabinet to reduce vibration, noise and rubbing against the back panel. Replacing a damaged pad helps stop rattles and protects internal components from wear. What it does:

• Provides rear-cabinet cushioning and thermal/abrasion protection for the back panel.
• Dampens vibration and reduces operational noise.
• Prevents direct metal-to-metal contact that can cause rubbing or wear.
• Common symptom fix: reduces rattling or vibrating noises from the appliance rear.

• Always disconnect power (and gas, if applicable) before starting any repair.
• Remove the rear access panel to access the pad; replace using the original mounting points, adhesive or clips.
• Inspect surrounding insulation and mounting hardware; replace any damaged fasteners.

This retaining clip secures small panels and components to help keep assemblies aligned and reduce rattles or movement during operation. It's a simple replacement that restores proper fit where the original clip has broken or gone missing. What it does:

• Holds trim, panels or small assemblies in place to prevent loosening and vibration
• Restores proper alignment and fit where a worn or broken clip causes gaps or rattling
• Commonly used where snap-in retention is required for plastic or sheet-metal parts
• Simple, single-piece part with no electrical or mechanical adjustments needed

• One retaining clip

• Turn power off and unplug the appliance before accessing the repair area
• Remove any adjoining panels or fasteners as needed to access the clip location
• Press or snap the clip into the mating slot; use care to avoid bending surrounding parts

This door gasket seals the refrigerator door to help maintain proper temperature and reduce energy loss. It replaces a worn, torn, or compressed seal to improve cooling performance and food safety. What it does:

• Creates an airtight seal between the door and cabinet to keep cold air in and warm air out
• Helps prevent frost build-up and reduces moisture inside the compartment
• Can stop visible gaps that allow warm air and odors to enter
• Restores consistent temperatures for better food preservation

• One refrigerator door gasket

• Handle gently to avoid stretching or tearing; follow the appliance manufacturer's alignment and fastening steps
• Clean the door flange and gasket channel before installation for a proper seal
• Some gaskets require heating (hair dryer) or a short break-in period to fully seat; follow your model's instructions

This replacement door gasket seals the refrigerator compartment to keep cold air in and warm air out, helping maintain consistent temperatures and reduce energy use. It fits along the cabinet opening and forms the primary seal between door and cabinet. What it does:

• Creates an airtight seal to help maintain internal cooling and reduce compressor runtime
• Prevents warm, moist air from entering and causing frost build-up or condensation
• Helps keep food fresher by maintaining stable temperatures
• Common symptom: visible cracks, gaps, or torn edges around the door perimeter
• Common symptom: warm spots inside the fridge, excessive frost, or higher energy use

• Unplug or disconnect power to the appliance before starting any repair
• Remove the old gasket and clean the sealing surface thoroughly before installing the new gasket
• Some installations require basic hand tools; check the appliance's service guide for detailed steps
• If adhesive or clips are used, follow OEM instructions

The clutch is designed to use centrifugal force to connect the shafts, while a drive shaft is nested inside. The clutch is made of durable metal and is sold as an individual assembly. These clutches are durable, but they also have the ability to function well beyond when they should be replaced. Therefore, even if the clutch hasn’t failed, it is important to pay attention to the performance of the engine. The repair is relatively simple and requires only a screwdriver and pliers to complete. Always wear gloves and disconnect the spark plug before performing any repairs on engine components like this clutch assembly. This OEM clutch assembly is manufactured to exact standards and is compatible with select models of gas chainsaws and other outdoor power equipment. It fits units from Poulan, Weed Eater, Husqvarna, and Jonsered.