2155964 Parts

This dampener cushions and stabilizes the washer tub during spin cycles to reduce vibration and noise for smoother operation. It replaces worn or damaged suspension dampeners to help restore proper tub balance and quieter performance. What it does:

• Absorbs and dampens tub movement during agitation and spin to reduce vibration and noise.
• Helps maintain proper tub alignment for more even spinning and less wobble.
• Commonly replaced when the washer rocks, thumps, or makes excessive noise during spin.
• Works with the washer's suspension system to protect other components from shock and wear.

• 1 dampener

• Disconnect power and shut off water supply before beginning any repair.
• Access typically requires removing the washer cabinet or front panel; follow OEM service instructions.
• Inspect mounting studs and clips for wear; replace as needed to ensure a secure fit.

Size: 8-32 x .312 inch.

This replacement ice cube pan holds and organizes ice in your refrigerator's freezer. Replacing a cracked or warped pan restores clean, contained ice storage and smoother access or dispensing, depending on your model's design. What it does:

• Collects and stores ice produced by the icemaker or manual trays
• Keeps cubes contained and easy to access; fits designated guides in the freezer
• Helps ensure proper ice access or dispensing on applicable models
• Typical symptoms: cracked bin, broken tabs, bin won't seat, ice spilling or clumping

• 1 ice cube pan/bin

• Disconnect power to the refrigerator and turn off the icemaker before starting
• Remove the old pan and empty any remaining ice
• If your model reuses a drive/crusher or other hardware, transfer those parts from the original pan as directed for your unit
• Seat the new pan fully in its tracks/coupler, restore power, and allow normal ice production

The ice maker bracket is an OEM part for Whirlpool refrigerators. This bracket is a structural component that holds and supports the icemaker assembly within the refrigerator. It allows for secure mounting and installation of the icemaker while also maintaining proper alignment.

Causes of a bad bracket can include wear and tear over time, cracks or breaks due to impact or stress, or corrosion issues that compromise the integrity of the mounting structure.

Symptoms of a bad bracket include:

• Loose or unstable icemaker installation
• Improper ice production or dispensing
• Noise or vibrations emanating from the icemaker area
• Moisture leaks or water damage near the bracket mounting points

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

A replacement machine screw with 8-32 threads used to secure panels and components on compatible Whirlpool appliances. Installs quickly to restore proper fit and stop rattling or loose parts. What it does:

• Secures panels, trim, brackets or components that use 8-32 machine-thread fasteners
• Restores proper alignment and prevents vibration-related noise
• Replaces missing, stripped, or damaged screws that allow parts to come loose
• Works where a standard 8-32 machine screw is specified by the manufacturer

• Disconnect power and/or gas before servicing the appliance to reduce shock or injury risk
• Use the proper screwdriver or nut driver for the screw head to avoid stripping
• Thread gently and stop when snug; do not overtighten to prevent stripping or damage
• If threads are damaged, replace with the correct-size screw rather than forcing it

The Fuel Pick Up Assembly is an OEM part for Husqvarna outdoor power equipment, including chainsaws, trimmers, and blowers. This assembly is responsible for drawing fuel from the tank to the carburetor, ensuring the engine receives a steady supply of fuel for optimal performance.

Over time, the fuel pick up assembly can become clogged or damaged due to debris in the fuel, exposure to ethanol-blended gasoline, or regular wear and tear. If the fuel pick up assembly is compromised, it can lead to poor engine performance or difficulty starting the equipment.

Symptoms of a bad fuel pick up assembly include:

• Engine not starting or hard to start
• Engine stalling or running inconsistently
• Reduced power or performance
•  Visible damage or clogging in the fuel line

This OEM Husqvarna part ensures proper fuel delivery and compatibility with your outdoor power equipment.

The Fuel Line is an OEM replacement part for Husqvarna outdoor power equipment, such as chainsaws, trimmers, and blowers. This component is essential for transporting fuel from the tank to the carburetor, ensuring that the engine receives a steady supply of fuel for optimal performance.

Causes of a bad fuel line can include regular wear and tear, exposure to fuel and environmental elements, or physical damage from mishandling or improper storage. Over time, the fuel line can become brittle, crack, or clog, hindering fuel flow.

Symptoms of a bad Fuel Line include:

• The engine failing to start or running inconsistently
• Visible cracks or leaks in the fuel line
• Fuel odor or visible fuel leaks around the equipment
• Reduced engine performance or stalling during operation

This OEM Husqvarna part ensures reliable operation and is compatible with various models of Husqvarna equipment.

Sometimes known as a chain tensioner, this kit is used to adjust the bar of a chainsaw, pruner, or pole saw to increase or decrease the amount of tension in the chain. Having an overly tense chain can cause friction with the bar, which could lead to an engine fire. A chain that is too loose has a chance of kicking back or even losing the chain mid-use, which would be incredibly dangerous. Chains naturally become looser over time, so be sure to regularly check the status of the chain. Having the right amount of tension is critical for the saw to work properly. Making adjustments is easy with our genuine OEM bar adjustment kit sourced straight from the manufacturer. Simply remove the clutch cover and find the adjustment assembly in the cover. Remove it and thread the new chain tensioner onto the assembly. Reassemble the clutch cover and be sure to line up all the corresponding parts. Compatible with Craftsman, Husqvarna, Poulan, and Poulan Pro. This part is shipped individually and only a screwdriver is needed to make this repair.

A fuel line fitting connects two separate sections of the fuel line. Over time and continued use, even durable fuel lines can become cracked, split, or broken, leading to leaks and the need for repair. If you have a fuel line that is separated or severely damaged, a fuel line fitting can be used to make a simple repair that can save you time and money. Depending on where in the equipment the damaged fuel line is, the repair steps can vary. Several fuel line fittings may be needed depending on the severity of the equipment’s damage. This repair will require a nut driver, forceps, a pair of pliers, screwdrivers, and a socket set to complete. This plastic fuel line fitting is compatible with numerous small engines for lawn and garden maintenance like leaf blowers, hedge trimmers, or chainsaws that are manufactured by many brands, like Husqvarna, Jonsered, Poulan, and Weed Eater. This fuel line fitting is a genuine OEM part.

This replacement part is a gasket kit intended for use in many types of lawn equipment including chainsaws, trimmers, blowers, and edgers. This is a genuine replacement part made by Husqvarna. Gasket kits are used inside the carburetor. A faulty gasket kit can cause the carburetor to not work or run slow. A new gasket kit might be needed if the current one is broken or damaged in any way. The user may notice the carburetor not working as well which might be due to the gasket. It is not unusual for this part to require replacement after years of normal use. Be sure the appliance is completely powered down and cooled off before attempting to replace this part. For more detailed instructions on how to replace this specific part, please reference the user guide.This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with various types of lawn equipment made by Husqvarna.

This is an authentic replacement part for the chain catcher used on chainsaws. The chain catcher is an important safety feature. In the event that the chainsaw chain becomes loose from the track or breaks, the chain catcher keeps it from sailing off the guide bar. The chain catcher is made from metal and it tends to be very durable. However, corrosion and other types of damage may prevent it from being effective. If the chain catcher is damaged or if it is lost, it should be replaced before using the chainsaw again. This is a genuine OEM replacement chain catcher that is sold individually. The screw used to secure the catcher to the chainsaw is sold separately. Buyers may want to buy the parts at the same time. This piece is specifically for use with chainsaws. Compatible brands include Husqvarna, Craftsman, Poulan, and Poulan Pro. When purchasing the chain catcher, buyers must be sure it is the correct option for their make and model.

Known as the primer bulb, this replacement part makes it easy for the engine to start. Responsible for circulating fuel through the carburetor, the purge bulb removes air out of the lines and allows the carb to have a new fuel charge before a start. The bulb may harden and crack over time, so it needs to be replaced to prevent an air leak. This is a genuine OEM part that works on different models of gas chainsaws from AYP, Craftsman, Poulan, and Husqvarna. This component is sold individually and comes with two screws.