240356500 Parts

Here is an authentic clutch friction washer that is sourced from the manufacturer. It is for use with several types of handheld outdoor power equipment. Other names for the part include clutch friction disk and clutch washer. The washer works as a friction disk that will help create the proper fit between components in the machine, which helps to engage the clutch. It is made from durable metal. The clutch friction washer that comes with the machine tends to be durable, but it may still need to be replaced at some point. The washer could become corroded, or it could break. It could also become lost when the owner is performing other maintenance on the machine. A wrench and screwdriver will typically be needed to conduct the replacement. Owners should check their manuals to ensure the correct location for installing the washer. The genuine OEM clutch friction washer is sold individually. It can work with more than 150 models of chainsaws, hedge trimmers, and string trimmers. Brands that have models compatible with the part include Craftsman, Husqvarna, Weed Eater, Poulan, and Poulan Pro.

This piston pin retainer is an authentic OEM replacement part sourced directly from the manufacturer for use on gas-powered chain saws. This retainer holds the pin that connects the connecting rod and piston. This is a small metal ring that has an opening on one side. It should be replaced anytime the piston is accessed. When it is taken off during repairs, it loses its compression and should be replaced.Take the spark plug out to make sure the saw cannot be started. Refer to the chainsaw's model diagram for the exact location of the piston ring. Remove the side cover, bar, and chain from the saw. Take the top cover off and set the screws aside. Next, remove the starter assembly and top handle, then the clutch drum and clutch with a clutch removal tool. Continue to disassemble the saw until the piston is visible. Use needle-nose pliers to remove the piston pin retainer and install the new one. Reverse the steps to reassemble the chain saw. Reinstall the spark plug and check the chainsaw for proper operation.This piston pin retainer is a quality metal part that is sold individually. It is designed for use in chainsaws manufactured by Poulan, Husqvarna, and Jonsered.

This adjustable pin bar is used on chainsaws and other lawn and garden equipment to ensure a blade is adjusted to the appropriate rate of tension. When the chainsaw blade is properly adjusted, it will cut faster and better. The pin bar is made out of a durable metal but can become damaged over time. If the pin bar is not working correctly or has broken, it will need to be replaced.If a chainsaw or pole pruner is no longer performing as well as it used to, the adjustable pin bar may need to be replaced. To replace this pin, the cover of the chainsaw will need to be removed. Take the gear that has the screw and pin bar on it out of the machine. Next, remove the broken adjustable pin bar and replace it with a new part. Reassemble the tool for it to be ready to use.This adjustable pin bar is designed for use on Craftsman, Poulan, Poulan Pro, and Husqvarna chainsaws, pole pruners, and string trimmers. It is a genuine OEM replacement component that is directly sourced from the manufacturer. The part is sold individually.

The thrust screw is made of durable metal and will sit in between a stationary part and a rotating surface within many types of chainsaws. The purpose of the thrust washer is to support the load or motion on a shaft while preventing motion on the shaft. The thrust washer is used to create a surface that supports a bearing where there are moving parts. If the thrust washer becomes damaged or worn, it cannot support the bearings and it may also become damaged. When this occurs, it may cause a rattling or squealing noises. When removing the thrust washer for a replacement, the reel and line assembly needs to be removed. A small screwdriver of a pick can be used to disengage the C-clip so the user can remove the plunger, spring, and thrust washer. Replace the part with a new thrust washer and reassemble the other components.This is an authentic OEM replacement component that is directly sourced from the manufacturer. It is sold as an individual part. The thrust washer is made for use with chainsaws manufactured by Poulan, Poulan Pro, Craftsman, and Husqvarna.

This nut is used to attach a mounting bar to a chainsaw or pole saw. The nut attaches in slightly different ways depending on the product, but it will feed a bolt that attaches the base of the bar to the pole or housing of the saw. If the nut becomes stripped or corroded due to exposure to the elements, it will need to be replaced. A socket wrench and a socket set are needed to install the part. simply screw it into the chain bar studs, making this a quick and easy replacement. The flat side of the nut should face outward to create a flush effect with the rest of the handle. The other side will fit into the bar. This part sold independently. It works with both Poulan and Husqvarna products and is a genuine OEM product sourced directly from the manufacturers.

This part is a screw. This is a genuine Husqvarna replacement screw and has been sourced directly from the manufacturer. This replacement part is intended to replace missing or broken screws in a number of different small outdoor power equipment models.With regular usage, screws can easily become stripped, rusted, or lost. This can lead to improper functionality of outdoor power equipment. It's important to use genuine manufacturer replacement screws to ensure the highest-quality materials and a proper fit that will keep equipment in good working order. When installing screws, always follow proper guidelines and abide by appropriate safety measures. Husqvarna screws are manufactured from high-quality, durable material. This replacement part is a high-quality piece of standard hardware with many different applications. For proper installation and usage guidance, it is recommended to refer to the equipment manufacturer diagram.This replacement screw is designed to fit various models of Husqvarna, Craftsman, Poulan, and Weed Eater trimmers and hedge trimmers, blowers, and chainsaws. Please note this screw is a genuine OEM part and is sold individually.

This nut is most commonly used with gas-powered chainsaws. The nut is used with a bolt, which is sold separately, to secure the carburetor and air filter together. It is a fastener that comes with a threaded hole. The bolt helps fight against rotation and vibrations that can pull the nut loose.Nuts can experience wear and tear and may become damaged or broken over time. If the nut has broken in half, has significant damage, or has been exposed to corrosive materials, it will need to be replaced. A wrench can be used to remove the damaged nut. Once that nut is removed, the new replacement part can be installed. Make sure to use work gloves and tighten the nut before using the lawn and garden equipment in the future.This is a genuine replacement part that is directly sourced from the manufacturer. It can be used with a variety of chainsaws, string trimmers, edgers, hedge trimmers, leaf blowers, and brush cutters created by Poulan, Poulan Pro, Craftsman, and Husqvarna. It is sold as an individual component. This part is sold individually.

This screw is designed to be used in many different chainsaws to connect and hold together various components. The screw can be used on its own or placed with a nut in a pre-drilled and threaded hole. If a nut is going to be used, it is best to choose one with the same threading and finish as the screw that will be used. A screw can become damaged in many ways that will require a replacement. Corrosion, excessive stress, or high temperatures may weaken the screw. In some cases, the damage can cause it to break or become loose and no longer properly secure other components of the chainsaw. A visual inspection can help determine if corrosion is present or the screw is damaged or broken. If the screw is stripped, a bolt remover may be needed to remove it to make the replacement.This screw is a genuine OEM replacement part provided directly from the manufacturer. It is sold as an individual component. The screw is compatible with chainsaws created by Poulan, Poulan Pro, Craftsman, and Husqvarna. A screwdriver is needed to replace, remove, or install the replacement part.

Here is a replacement check valve for use with a wide range of different types of equipment and machines. The check valve is a one-way valve that is used in various types of lines as a means to prevent backflow. In the case of engines, the valve is used as a means to prevent fuel or oil from flowing backward. The check valve has the potential to wear down or crack over time. If this happens, it will no longer be capable of stopping backflow from oil or gas, and it will need to be replaced. Owners should examine the check valve when they are inspecting their machine to see if it is still in good working condition. This is a genuine OEM replacement check valve. It is made from durable plastic and is sold individually. The part can be used for more than 150 models of chainsaws. It can also be used with some models of trash compactor, string trimmers, and hedge trimmers. Compatible brands include Craftsman, Husqvarna, Weed Eater, Poulan, Poulan Pro, Broan, Paramount, and Turf King.

This vent plug is a genuine Husqvarna part, sold individually. This vent plug can be used as a replacement part in a chainsaw. The purpose of a vent plug in a chainsaw is to permit the flow of air into the oil tank of the appliance such that a vacuum is not created. The vent plug in a chainsaw might have to be replaced if the vent plug ceases to function. This could occur if the vent plug has been punctured, scraped, dented, warped, or eroded. If this occurs, the vent plug should be removed and replaced by this genuine OEM replacement part in accordance with the proper set of instructions sourced from a relevant appliance manual. It is a simple replacement process that will require only basic tools to conduct.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This vent plug is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Poulan, and Poulan Pro.

This worm gear spring is located on a chainsaw's engine crankshaft. It engages a gear in the oil pump, which causes the pump to transfer oil to the chain and bar on the equipment. If no oil is coming out of the chainsaw's oiler, this can be an indication that it needs to be replaced.Sometimes the worm gear spring can slip on the crankshaft, which will cause it to wear down. As time goes on, the problem can worsen until the worm gear no longer rotates at all. To replace the part, remove the clutch cover assembly, bar and chain assembly, and clutch drum. Take off the clutch assembly, front handle, and chain brake assembly. After the oil pump assembly is removed, the worm gear can be replaced.This worm gear spring is an authentic OEM replacement part sourced directly from the manufacturer. It is sold as an individual component. The part is compatible with many chainsaws created by Craftsman, Poulan, Husqvarna, and Poulan.

This bar adjustment retainer is an integral part of the bar adjustment mechanism that assists with securing the screw in many kinds of lawn and garden equipment. The retainer is made of durable metal and is used to replace a faulty, broken, or damaged original part. Sometimes the bar adjustment retainer will break or become damaged and need to be replaced.If the retainer breaks, it can cause the bar adjustment screw to become damaged or stripped. Inspecting for damage requires taking apart the equipment. Use work gloves to remove the chain bar cover and get access to the retainer. Replace it with a new retainer and screw. The bar adjustment pin should be placed at the end of the screw. Thread the screw through until it catches on the retainer. Once that's complete, the other parts can be reassembled.This bar adjustment retainer is a genuine OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual part. The retainer is made to be used with string trimmers, edgers, hedge trimmers, pole pruners, and chainsaws created by Craftsman, Husqvarna, Poulan, and Poulan Pro. This part is sold individually.

This oil pickup elbow is a genuine Husqvarna part, sold individually. This oil pickup elbow can be used as a replacement part for chainsaws. The function of the oil pickup elbow for a chainsaw is to fasten around the fuel line and prevent the fuel line from being yanked from the fuel tank by force during inspections or while operating the chainsaw. An oil pickup elbow might have to be replaced if it no longer effectively keeps the fuel line in place and attached to the fuel tank. If the chainsaw user can pull the fuel line out of the machinery, the oil pickup elbow needs to be replaced with this genuine OEM replacement part. This could be as a result of damage to the oil pickup elbow in the form of general wear and tear or loosening over time. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer, and it is sold individually. This oil pickup elbow is compatible with the following brands: Husqvarna, Craftsman, and Poulan.