2702V Parts

The flywheel key keeps the engine flywheel and the crankshaft connected. In the event that the engine is forced to a sudden stop, the flywheel key could be sheared off, making it impossible for the engine to start back up again. Replacing the flywheel key is a part of routine maintenance for many modern engines, so it should be inspected and replaced as needed. This sturdy metal flywheel key is easy to install, but remember to choose the right torque setting when doing the replacement. Always disengage the spark plug and wear gloves when replacing engine parts. This genuine flywheel key is designed to be used in a number of lawn and garden equipment products from MTD, Troy-Bilt, Yard Machines, Cub Cadet, Yard-Man, Husky, and Bolens. It can be used as a replacement for many models of snowblowers, lawnmowers, and log splitters. Sold individually.

This replacement part is a stud assembly. This is a genuine replacement part made by MTD. This stud assembly is responsible for keeping the muffler in place and secure so that the lawn mower may operate smoothly and according to the user's preferences. A new stud assembly might be needed if the current one is misplaced or damaged. It is not unusual for the studs to become stripped over time and need to be replaced. If the muffler is no longer able to stay in place, it can be due to the studs and should be looked into. Be sure the engine is completely turned off before attempting to replace this part. This stud assembly is sold individually and is sourced directly from the manufacturer. This part is a genuine OEM replacement part to ensure proper fit and long-lasting use.

This is a gasket kit that contains a variety of parts utilized in many kinds of lawn and garden equipment. Each of the parts in the kit is created to seal two surfaces inside the equipment. The components in the kit include a carburetor insulator plate, a carburetor gasket, a carburetor insulator gasket, two carburetor gasket plates, an exhaust pipe gasket, a valve cover gasket, and an oil drain plug washer. If a lawn and garden tool is leaking fuel, air, or oil, these parts can be used to replace the faulty component.A socket wrench or small monkey wrench and a screwdriver will be needed to replace any parts included with the gasket kit. Make sure the lawn equipment is on a flat surface and the spark plug wire has been disconnected. Disassemble any needed components to reach the gasket or other part that needs to be replaced. Put in the new component and reassemble before use.This is an authentic OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual kit. The external gasket kit is designed to be used with snowblowers manufactured by Yard-Man, Huskee, MTD, Yard Machines, Troy-Bilt, Cub Cadet, and Craftsman.

This throttle linkage spring is typically attached to the throttle cable, although it may be attached to the carburetor or the throttle body on select models. This spring will close the throttle valve, which helps reduce the fuel flow to the engine and helps to slow it down. The spring can become stretched or snap over time with regular use. A faulty throttle spring could be identified by the throttle sticking or lacking any control at all. This simple repair will require needle nose pliers, sockets, a screwdriver, and a wrench. Be sure to use gloves to perform all repairs and use caution when replacing the throttle spring to prevent damage to the new part. This OEM throttle spring is designed for use with lawn mowers, snowblowers, tillers, leaf blowers, log splitters, wood chippers, and other small engines in lawn care equipment. It is compatible with more than 150 models and a number of brands, including Troy-Bilt, Husky, Yard-Man, MTD, Yard Machines, and Cub Cadet.

This muffler gasket is a genuine MTD part, sold individually. This muffler gasket can be used as a replacement part in lawn mowers, snowblowers, tillers, leaf blowers, log splitters, and wood chippers. The purpose of the muffler gasket for one of these small engine outdoor appliances is to seal off the area in and around the muffler of the appliance so that external materials cannot filter in, and internal materials cannot leak out.The muffler gasket in a small engine outdoor appliance might have to be replaced if it can no longer create an effective seal in and around the muffler. If the muffler gasket is scraped, dented, cracked, warped, or eroded to the point that the seal is broken, the muffler gasket should be removed and replaced by this genuine OEM replacement part.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This muffler gasket is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Troy-Bilt, Yard Machines, Huskee, Yard Man, and MasterCut.

The fuel drain plug gasket creates a solid, leak-proof seal in the fuel drain. The gasket goes into the connection between the drain and the fuel tank. In the event that this gasket fails, there could be fuel leakage from the equipment that could be costly or even dangerous. Make sure to inspect and replace all gaskets regularly to ensure that the engine is working efficiently. This gasket is made of durable rubber material and is simple to install. drain the fuel to provide access to the drain plug and the fuel line without spilling fuel everywhere. Always wear gloves and make sure to disconnect the spark plug or disable the engine before working on any outdoor power equipment. This OEM replacement fuel drain plug is compatible with several tillers, snowblowers, lawnmowers, tractors, and other outdoor power equipment made by Craftsman, Cub Cadet, Troy-Bilt, Yard Machines, MTD, Huskee, Yard-Man, and MasterCut. Sold individually.

This replacement part is an oil seal. This part is a genuine replacement part made by MTD. Oil seals are commonly found in machines with small engines and are responsible for making sure that oil does not leak from the appliance during or after use. A new oil seal might be needed if the current one is missing or damaged in any way. This can include being cracked, stripped, or dented. Any type of damage may cause oil to leak from the tank which can lead to additional problems within the machine itself. Be sure to wear work gloves during this repair as oil can be difficult to remove from the hands. Refer to the correct owner's manual before replacing this part. This oil seal is a genuine OEM replacement part. This part is also sold individually and is sourced directly from the manufacturer to ensure proper fit and long-lasting use.

This is a valve cover gasket that is used in a number of small gasoline engines for a variety of lawn, landscaping, and outdoor power tools including log splitters, chippers, leaf blowers, power vacuums, tillers, and snow blowers. The valve cover gasket provides a seal between the engine's cylinder head and the camshaft to prevent oil leaks. The gasket also seals the spark plug port. This seal prevents the engine oil from entering the combustion chamber. Over time, these gaskets are subjected to heat extremes and the constant vibration of the small engine that runs at about 3,600 revolutions per minute. It is not uncommon for a valve cover gasket to begin to leak after several years of service. The first sign of this is usually white smoke emitted from the engine's exhaust, which is a sign of oil burning in the fuel mix. Eventually, the engine will lose power, as well. When replacing this part, make sure to use a gasket such as this one, which is a genuine OEM replacement part, manufactured to be identical to the specifications of the original gasket. This gasket is compatible with small engines made by Bolens, Huskee, MTD, Troy-Bilt, Yard Man, and Cub Cadet.

The carburetor is responsible for combining fuel and air within the engine to make internal combustion happen. A carburetor gasket acts as a boundary between where the air is and isn’t meant to be within an engine. If the carburetor gasket is blown, the air to fuel ratio will be off, and the motor will not combust properly. A bad gasket will cause the motor to stall out at idle or vibrate badly. The throttle will not behave properly either. Using a screwdriver, install this genuine OEM part by taking apart the carburetor, removing the old gasket, and putting the new one in place. Be sure to clean all the parts when taking apart the carburetor. This part is sourced directly from the manufacturer, and it is shipped individually. It is compatible with Craftsman, Cub Cadet, MTD, Huskee, and many more brands of snowblowers, lawnmowers, tillers, chainsaws, chippers, and many other tools with small motors.

This carburetor insulator is a genuine MTD replacement part for appliances with small engines, such as lawn mowers, lawn tractors, lawn trimmers, snowblowers, chipper shredders, tillers, and leaf blowers. The function of a carburetor insulator in a small engine appliance is to maintain a lower temperature for a running engine and to keep that heat away from the carburetor, the purpose of which is to mix the air and fuel in order to start the engine. A functioning carburetor insulator will prevent the engine from overheating.A broken or non-functioning carburetor insulator will likely not prevent the engine from operating, but it might slow down its power or reduce its fuel economy due to compensation from overheating. An engine with a damaged carburetor insulator might take in more fuel than usual or allow in unmetered air. An unmetered air leak can cause damage to the engine in the short-term so if there appears to be visible damage to the carburetor insulator, it should be replaced as soon as possible.This carburetor insulator is compatible with the following brands: MTD, Cub Cadet, Yard Machines, and Craftsman.

This is a high-quality connecting rod assembly that is used in many types of lawn and garden equipment from several manufacturers. It has a metal rod that connects to the crankshaft and piston. The purpose of the connecting rod is to allow pressure and combustion to rotate the engine's output. If this part is damaged or broken, the garden equipment may not work or may not have the desired level of performance. If this happens, the connecting rod assembly should be replaced.A basic set of tools and work gloves will be needed to replace the connecting rod assembly. First, turn off the tool with the damaged rod and put it on a level and sturdy surface. The spark plug wire should be disconnected to prevent the engine from turning on. Access the rod and replace it with the new part before use.The connecting rod assembly is sold as an individual part. It is an authentic OEM replacement component that is sourced directly from the manufacturer. The part is made to be compatible with lawnmowers, wood chippers, snowblowers, log splitters, tillers, and leaf blowers manufactured by MasterCut, Craftsman, Yard-Man, Cub Cadet, Huskee, Troy-Bilt, MTD, and Yard Machines.

It's best to have spare O-ring gaskets on hand to rebuild a carburetor when the need arises. Use this manufacturer-approved replacement part to complete the process. When outdoor power equipment shuts off just after starting or won't start altogether, there may be a problem with the carburetor. It could be a leak that causes compression problems keeping the machine's engine from starting. Gasoline may drip from the float bowl because of an O-ring that won't seal or seat evenly all around, or one that has become brittle over time. This is a genuine OEM part compatible with specific lawnmowers, snowblowers, wood chippers, log splitters, tillers, and other garden maintenance machines from Craftsman, MTD, Cub Cadet, MasterCut, Troy-Bilt, and Yard Machines. It is sold individually.