388Wvs Parts

This is a blade for a walk-behind lawnmower. A new walk-behind lawnmower blade may be needed if the original is cracked, broken, or damaged in any way. The lawnmower blade can become damaged if it hits a rock, a curb, a landscape block, or other hard objects. It is essential to use extreme care and caution while performing care and maintenance or replacing the lawnmower blade as it can cause serious injury. Wear gloves to protect hands during the replacement process.This lawnmower blade is a genuine OEM Husqvarna part. It is sold individually. This specific lawnmower blade is compatible with walk-behind lawnmowers that are manufactured by the Husqvarna brand and the Jonsered brand.

The drive control cable is a feature of self-propelled walk-behind mowers that engage the gears of the propulsion mechanism. This cable is necessary to allow users to determine when they want to engage the self-propulsion mechanism and when they either want to allow the machine to idle or they wish to push it when mowing in small, tight areas where the self-propelling mechanism is not useful. Occasionally, as with all such mechanisms, the cable may break and it will become necessary to replace the drive control cable. In order to replace the cable, first disconnect the spark plug boot and drain the gasoline, since it's necessary to raise and lower the engine. If it's necessary to place the mower on its side, remember to keep the air filter up so oil does not drain into it. Release the drive cable from the housing that it shares with the engine engagement cable. Remove the drive gear housing on the bottom and the top of the cutting deck. Use needle nose pliers to remove the drive cable. Reverse the process to attach and engage the new drive control cable. This replacement cable is a genuine OEM part, manufactured to be identical to the original cable specifications. This cable is compatible with Craftsman and Husqvarna engines.

The replacement handle bolt here can be used for lawn and garden equipment. The handle bolt is used with the handle knob to help secure the upper and lower handles of the machine together. If the bolt is damaged or missing, it will not be possible to secure the handles properly. The handle bolts are durable and made from metal, but they could become damaged due to corrosion or natural wear. In other cases, they could become lost. In either case, they will need to be replaced. The replacement is simple and will not require any tools, as the square part of the bolt will fit into the handle perfectly. The handle knob will then be used to keep it in place. The handle bolt is a genuine OEM Part for lawn mowers and snowblowers. It is compatible with some models from Husqvarna, Murray, Weed Eater, Poulan, Jonsered, Craftsman, and Ryobi. It should be noted that this product is sold individually, and the handle knob is not included.

A lawnmower, weed whacker, or trimmer is exposed to a lot of flying debris, and this puts many parts at risk of becoming clogged with grass and other materials. This cover is designed to prevent any debris from reaching the interior of the wheel or the axle. If a large amount of grass or clippings accumulate inside of the assembly, the machine will be almost impossible to move forward - whether self-propelled or manually operated. This cover prevents that from occurring and simply kicks it back in the direction it came. It does take a lot of wear and tear. Installing it is extremely easy and requires little more than a wrench. Even if the cover is aged, or broken, it will remove easily and take minutes to replace. Expect to replace this at least once over the average lifespan of a trimmer. This works with Husqvarna, Poulan, Craftsman, Ariens, Weed Eater, Jonsered, and Murray makes and models. It is a genuine OEM part sold individually.

This seal strip replaces a worn or damaged door gasket edge to restore a proper seal and help the appliance maintain temperature and operate quietly. It's a direct-fit service part used where a continuous seal is required. What it does:

• Provides a flexible barrier along the door/frame to reduce air leaks and heat/cold loss
• Helps prevent moisture buildup and improves energy efficiency when sealing is restored
• Reduces rattling and vibration caused by a compressed or torn seal edge
• Commonly replaced when the strip is torn, missing, or no longer adheres properly

• One seal strip

• Disconnect power to the appliance before servicing to avoid electrical or burn hazards
• Clean and dry the mounting surface; remove old adhesive or residue for best adhesion
• Align the strip carefully and press firmly; allow any adhesive to cure per manufacturer instructions

This engine control cable is responsible for controlling not only the engine speed but also the rotation of the blades. The engine control cable attaches to the control handles of the lawnmower. When the handle is pushed down, this will activate the engine control cable to power the engine and the blades. When the engine control cable is malfunctioning, the machine's engine and blade won't move no matter how hard the control handle is pressed. Replacing the engine control cable is a straightforward procedure that requires a nut driver and pliers. Wear gloves for protection. Husqvarna manufactures this brand-new engine control cable. It has Z-type bent ends and thick, durable rubberized exterior layer. There's a plastic clip, too. It is specifically made for Craftsman, Murray, Husqvarna, Weed Eater, Ariens, Poulan, and Poulan Pro lawnmower models. It approximately measures 61 inches and is sold individually.

This pinion gear is an essential part of the steering assembly as it translates the rotation of the steering shaft into vertical motion. The pinion gear travels along the drivetrain, which pushes the wheels either forward or backward, causing the mower to turn. Without a functioning pinion gear, the mower will no longer steer. A pinion gear's teeth can slowly wear away through repeated use, causing it to begin slipping. When this happens, the operator will no longer be able to turn their mower as effectively or possibly not at all. This can be dangerous for the operator and they should stop mowing immediately. With most push lawn mowers, the pinion gear is located inside the wheel well. To replace it, simply remove the wheel and mounting washer, pop off the retaining ring, and remove the pinion. Reassemble and test the forward motion of the wheel. This genuine replacement OEM part is compatible with a number of lawn mowers from Poulan, Jonsered, Husqvarna, and Weed Eater. It comes sourced from the original manufacturer and does not include any additional hardware.

This top-front bracket secures the appliance's top or front panel in place to keep panels aligned and stable. Replacing a damaged bracket restores proper panel fit and reduces rattling or loose trim. What it does:

• Mounts and supports the top/front panel to the appliance frame
• Prevents panel movement that can cause noise or misalignment
• Helps maintain correct door or control-panel fit where applicable
• Used when bracket is bent, cracked, or missing mounting holes

• One top-front bracket

• Disconnect power (and water, if applicable) before starting any repair
• Remove necessary trim or panels to access the bracket; retain original fasteners unless new hardware is supplied
• Align bracket and reinstall screws securely; avoid overtightening to prevent strip-out
• If other mounting hardware is damaged, replace it to ensure a secure fit

This inlet hose connects the household water supply to the refrigerator's water system so ice makers and dispensers receive a steady water feed. Durable, flexible tubing replaces worn or leaking supply lines to restore proper water flow. What it does:

• Channels incoming water from the home supply to the refrigerator's water valve and ice maker
• Replaces cracked, split, or leaking supply tubing that can cause reduced water flow or puddling
• Helps prevent leaks that can lead to water damage when original tubing fails
• Works with the fridge's internal water system to support ice and dispenser functions

• One inlet hose (single water supply line)

• Turn off the home water supply and unplug the appliance before servicing
• Inspect fittings for signs of corrosion; use the proper connector tools to avoid damage
• Tighten connections to a leak-free fit but avoid over-tightening plastic fittings

This is a handle knob for many brands of lawnmowers, snowblowers, or trimmers. It attaches to the upper or lower handle on adjustment levers. This genuine OEM handle knob is a frequently lost or broken component as it is on the exterior of the machine, used frequently, and often struck during use. It will need to be replaced if it becomes wobbly or refuses to remain firmly in place. The only tools required to install the authentic replacement part will be a rubber mallet and a 1/16 punch. It is threaded to easily install once the cap has been removed with the punch. Made of durable materials, it ships individually but may require the use of a handle bolt depending upon the machine it is being used to repair. It works on rotary lawnmowers as well as manually and self-propelled models from brands like Husqvarna, Poulan, Weed Eater, Ryobi, Murray, and Craftsman, among others.

This pawl drive is a genuine Husqvarna part, sold individually. This pawl drive can be used as a replacement part in lawn mowers and chainsaws. This pawl drive is made out of durable metal. A pawl drive might have to be replaced within the standard lifespan of a lawn mower or a chainsaw. A pawl drive could suffer damage as a result of general long-term usage or from a direct collision with a falling object or a hard surface; this damage could come in the form of puncturing, erosion to the metal material, or warping the part beyond repair. If this is the case, the pawl drive should be immediately removed and replaced with this genuine OEM replacement part. Remember to wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer, and it is sold individually. This Pawl drive is compatible with the following outdoor appliance brands: Husqvarna, Poulan, Craftsman, Weed Eater, and Ariens.

This is a grass catcher bag that is for use with select lawn mower models. The grass bag is used to catch the grass clippings that blow from under the blower deck. It makes it far easier to take care of the lawn, as all of the clippings will be in the bag and won't need to be raked up after mowing. If the bag is damaged, it should be replaced.The grass bag is durable and can stand up to a substantial amount of use. However, there is always the chance that it could become punctured from material that is blown into the bag. Over time, the bag could also start to wear down, which would require a replacement, as well. The replacement is fast and easy and will not require any tools.The grass catcher bag will work with certain mower models from Husqvarna and Poulan. The bag is sold individually. It is a genuine OEM replacement part that has been sourced from the manufacturer.

This part is a discharge guard designed to fit on lawn mowers built by Craftsman. The discharge guard fits on the right side of the cutting deck and guides the ejected grass clippings out the right side of the mower. Because they protrude several inches away from the mower, it is common for discharge guards such as these to be banged against fences, trees, curbs, and other fixed objects. While the guard is constructed of resilient plastic, it can be cut or the slots used to fix it to the mower may be torn, causing the grass to be incorrectly discharged. Replacement of the discharge guard is a simple matter since no hardware is involved. Simply lift off the old guard, removing it from the slots in the attachment housing. The new guard should settle onto the slots and provide an immediate perfect seal. Should replacing the side discharge guard become necessary, it is essential to use an OEM certified replacement that is, like this one, identical to the manufacturer's original part. This discharge guard is compatible with mowers offered by Weed Eater, Ariens, Craftsman, Poulan, and Husqvarna.

A 10-24 lock nut used to secure threaded fasteners and prevent loosening from vibration. Simple, durable replacement that restores proper fastening where the original nut has worn or failed. What it does:

• Secures shafts, studs, or bolts with 10-24 threads and resists loosening under normal appliance vibration.
• Restores proper tension where a stripped or loose nut causes rattling or parts shifting.
• Helps maintain alignment of panels, brackets, or components that rely on a locked fastener.
• Small hardware solution for common fastening failures—no special part modifications required.

• Disconnect appliance power and water before beginning repairs.
• Use the correct 10-24 threaded fastener and a properly sized wrench or socket to avoid rounding the nut.
• Tighten to a snug fit—do not overtighten or force onto damaged threads.
• Inspect mating threads and replace the bolt/stud if threads are stripped or damaged.

This is a replacement pan-head, locking screw used to secure the top bracket on compatible Frigidaire appliances. It provides a reliable fastener that helps keep the top bracket and panels held firmly in place. What it does:

• Secures the top bracket to the cabinet or chassis to prevent bracket movement or rattling
• Restores proper alignment of top panels and trim that may be loose or sagging
• Uses a locking feature to resist loosening from vibration
• Pan head design provides a low-profile, finished appearance once installed

• One screw as shown

• Use the matching #8-32 driver or bit and tighten until snug; avoid over-torquing to prevent stripping
• Turn off power and remove panels as needed before accessing the bracket area
• Replace only with the same size and thread type to ensure secure fit
• Replace all related screws for even support