4036Er2004a Parts

Replacement rocker switch that restores manual control of the range-hood fan or light, providing straightforward on/off operation. Use this switch to replace worn, stuck, or non-responsive controls for safer, more reliable operation. What it does

• Replaces a failed or damaged rocker-style on/off control so the fan or light will operate when switched.
• Use when the hood fan or light won't turn on, the switch feels loose or sticks, or the control works intermittently.
• Fits into the original switch location and connects to existing wiring/quick-disconnect terminals.
• Restores simple user control without replacing the entire hood control assembly.

• One rocker switch.

• Always disconnect power at the breaker before servicing electrical components.
• Turn off power, label or photo the wiring for reference, then remove the old switch and attach the replacement to matching terminals.
• Secure the switch and restore power; test fan and light operation.

This switch assembly restores dependable control of your range hood or ventilation unit, helping resolve unresponsive or intermittent controls so the appliance turns on, off, and changes settings as expected.

• Provides the user interface to turn functions on/off and change settings
• Failure signs include no response on certain settings, intermittent operation, or a stuck/loose actuator
• Heat, moisture, and normal wear can degrade internal switch contacts over time
• Replacing the switch restores smooth, consistent operation

• Disconnect power at the breaker before servicing
• Access the control area and photograph wiring to document positions
• Move wires one at a time to the new switch; ensure tight, fully seated connections
• Reassemble and test all functions before finalizing

This replacement fan blade restores airflow in hood and ventilation blowers by moving air through the fan assembly. Use it to replace cracked, bent, or worn blades and help reduce vibration and noisy operation. What it does:

• Spins on the blower motor to generate airflow for ventilation and exhaust.
• Replaces blades that are cracked, bent, or visibly damaged and causing reduced airflow.
• Can reduce unusual noise and vibration caused by an imbalanced or broken blade.
• Helps restore proper vent performance when airflow is weak or inconsistent.

• Disconnect power to the appliance before starting any service.
• Remove the blower housing or access panel to reach the blade; follow OEM instructions.
• Keep fasteners and spacers in order during disassembly; reassemble with original hardware unless replacements are specified.
• If vibration or noise persists after replacing the blade, inspect motor bearings, mountings, and blower housing for damage.

The Motor Assembly is an OEM part for Broan range hoods. This part is the driving force behind the extraction and circulation capabilities of your range hood, efficiently removing smoke, grease, and odors from the kitchen air. 

Causes for replacement include noticeable decreases in suction power, abnormal sounds indicating mechanical wear, or failure to start, all of which can compromise your kitchen's air quality and comfort.

Symptoms of a bad Motor Assembly include:

• A noticeable reduction in exhaust efficiency, failing to clear smoke or odors effectively.
• Increased noise levels, such as grinding, humming, or buzzing, suggesting the motor is struggling.
• The range hood not operating at all, pointing to a potential motor failure.

Color: white.

The Damper is an OEM part for Broan range hoods. It is designed to regulate airflow, preventing backdrafts and ensuring efficient ventilation by allowing air to flow out while blocking external air from entering.

Causes of a bad damper can include accumulation of grease or debris, damage from cleaning or impact, or wear and tear over time. A malfunctioning damper can lead to poor ventilation and compromised kitchen air quality.

Symptoms of a bad Damper include:

• Reduced airflow or ventilation efficiency
• Unusual noises from the range hood
• Odors lingering in the kitchen
• Air drafts entering through the range hood

This OEM Broan part is designed for optimal performance, helping maintain a clean and well-ventilated kitchen environment.

This factory replacement cover fits select Broan ventilation units. It replaces a cracked, damaged, or missing cover to protect internal components, restore a clean finished appearance, and help maintain proper airflow and performance.

• Shields internal wiring, fan, or control components from debris and accidental contact
• Helps direct airflow through the housing for consistent operation
• Restores a secure fit if the original cover is cracked, warped, or broken
• Common symptoms include rattling/vibration, poor fit, exposed parts, or a loose/missing cover

• Disconnect power to the unit before servicing
• Support the cover and remove retaining screws or release tabs; note orientation for reassembly
• Transfer any clips, grommets, or seals from the old cover if applicable
• Reinstall securely without overtightening; verify clearance and operation before restoring power

This retainer is a small mounting clip used in Broan ventilation hoods to hold trim, lenses, or small assemblies securely in place. Replacing a worn or broken retainer restores stable mounting and reduces vibration or rattling. What it does:

• Secures trim pieces, light lenses, or small assemblies so they stay aligned and seated
• Prevents parts from shifting or vibrating during operation
• Helps stop rattling or loose components around the hood opening
• Keeps replaceable covers and lenses from falling out when installed correctly

• Disconnect power to the appliance or turn the circuit breaker off before working on the hood
• Use common hand tools as needed; handle sharp sheet-metal edges with gloves
• Verify this retainer matches the damaged piece before installation

This name plate is the small identification label that mounts to the appliance to display model and serial information. It restores a legible ID label so you can easily identify the unit for service or parts ordering. What it does:

• Replaces a missing, worn or damaged identification label
• Provides visible model/serial and manufacturing information for repairs
• Restores the appliance's factory identification for resale or inspection

• Clean and dry the mounting surface before installing for best adhesion
• Peel backing or attach with the existing fasteners, aligning carefully to avoid wrinkles
• If the old label is stuck, remove it gently with a plastic scraper and an appropriate adhesive remover
• Always disconnect power to the appliance before performing any service that requires access to internal panels

The flywheel key is the component on outdoor equipment that keeps the flywheel connected to the crankshaft. Over time, this key may become damaged or broken, particularly if the engine experiences a forceful stop, like hitting a large stationary object. If the flywheel key breaks, the engine will not start. A slightly damaged flywheel key is noticeable through symptoms like misfiring, backfiring, or having no power. If any of these are occurring, the flywheel key should be replaced to prevent complete engine failure.A flywheel puller tool is required for this repair. Make sure the engine is cool before working on the flywheel. Wear safety gear, including gloves and eye protection. Disconnect the spark plug and remove the blower housing. Remove the flywheel mounting nut and set it aside. Take the recoil starter cup off the mower. Use the flywheel puller to remove the flywheel and access the flywheel key. Remove the broken flywheel and replace it with the new flywheel. Reverse the steps to put the mower back together.This flywheel key is made of an aluminum alloy and is sold as an individual part. It is designed for use in lawnmowers, lawn tractors, and other small engines manufactured by Briggs and Stratton, Toro, Lawn-Boy, Simplicity, MTD, and others.

The largest factor hampering the engine efficiency of lawn mowers is the air in the air/fuel mix. This Briggs & Stratton pre-cleaner filter is a flat device that sits inside the air filter housing and purifies the air of contaminants and particulates before it even reaches the air filter. This improves the lifespan of the air filter and improves the efficiency of the engine. The pre-cleaner, because it is highly effective at removing dust and other contaminants from the air, will eventually become full of particulate. At that point, the user may notice difficulty in getting the mower to perform. To replace the pre-cleaner, remove the outer air filter cover snd locate the old pre-cleaner just inside. Remove the old filter and replace it with the new one. Attach the top cover. This is an OEM certified replacement part that was built to the exacting standard of the original equipment of the tractor. Although it was manufactured intentionally for the Toro lawn tractor, the filter is also compatible with several other brands, including Simplicity and Briggs & Stratton.

This oil seal is a genuine OEM replacement part designed for use on a wide variety of small gas-powered appliance engines. Although small, an oil seal is an important part of the oil cylinder assembly as it prevents oil from leaking into other parts of the engine. If oil begins to leak into the engine, it can corrode other parts or even pose a fire hazard. Therefore, it's important that the oil cylinder is tightly sealed to prevent any damage to the engine. Seals can wear out over time, especially if exposed to heat. Heat will cause the seal to shrink, effectively unsealing the oil cylinder. Before making this repair, be sure to drain the oil cylinder of any oil and be prepared for an involved replacement process. This part is compatible with Toro, Murray, and Briggs & Stratton appliances and is sourced from the original manufacturer. It ship individually of other hardware.

Oil filter for most Intek and Vanguard engines and selected L-head twin cylinder engines. It is recommended to replace the oil filter at least once per season.

This is the rocker cover gasket, which seals the cylinder head on small engines so that the engine doesn’t develop leaks. Periodically, a gasket may deteriorate with heavy use. To maintain good engine performance, the rocker cover gasket needs to be replaced with an OEM certified replacement. This type of gasket is most often found on lawn tractors. Replacing the original gasket with the new one is a simple and straightforward process. There are four bolts holding the valve cover in place. Simply remove them and the old gasket, which will likely have to be scraped to get it completely off the cylinder head. Place the new gasket exactly over the metal frame of the cylinder head—it should fit perfectly. Hold it in place with a small amount of RTV, a silicon sealer that is impermeable to oil and gasoline. Replace and tighten the four valve cover bolts. This part is made by Genuine Midwest Engine. This part is used in Briggs & Stratton engines and also used by Toro and Vanguard. This is an OEM part. It's also sold individually.