Kenmore Refrigerator 795.78546800 (79578546800, 795 78546800) Parts

• Leaking

Removed the old line and replaced with the new. This is the sixth time I've replaced the line. Yes you read that right, the sixth time. Lines fail about every 6-8 months so I can change one out now in about 10-15 minutes. Bought the refrigerator in Feb '09 and the line first failed in March 2012. Since then I've had failures in as little as 4 months to as much as 9 months. Frustrating to say the least, but I'm a whiz at changing out the line :-) Read more

After my layman's diagnosis (hope) of a bad micro switch to the ice dispenser (would not activate and dispense ice through the chute) I purchased the both the ice and water dispenser micro switches (kill two birds with one stone). Albeit the video attached to these parts may be helpful to some it was not applicable to my refrigerator, as you could not access it from the front by removing the exterior dispenser plate. Don't try this on the LG, LFX25991ST series, refrigerator or you may break it... Read more

• Light not working
• Not dispensing water
• Ice maker not making ice

I watched the repair video and I replaced the switch. I ordered the switch on Friday and the part came the next day. Amazing. Read more

After several wrong size shelves was order from other companies. I came across Appliance Parts. The way your helped to find your needed part is in A category on its on compared to the other companies but to make a long story short. The PART arrived in A few short days and was the perfect fit. You definitely have a repeat customer here!!!!???? Read more

• Fridge too cold
• Fridge too warm

I replaced the evaporator sensor. Your company sent me the exact sensor I needed at a great price. No other company was able to help. No call was needed. Your website was great. Read more

Ordered new tube part AJR56656503 for Lg LFX25978ST/01 watched a lot of videos but none showed how to remove the door tube end from its connection so I just cut and spliced the new tube to the old under the cover for the door hinge area after feeding it from the back of frig to that area. It was easy till I tried to remove the line end from ice maker area. Read more

1. Googled "appliance replacement parts" - found two sites to consider 2. Researched parts needed via a exploded diagram - can't fix it if you can't name it. 3. AppliancePartsPros.com had the easiest diagram and after checking, the lowest price. 4. Parts showed up within a couple of days - an in-transit note was helpful. 5. The part screws in but watch out you don't break the tiny black pin holding the part on in addition to the screw. Needed JB Weld to fix that. Read more

Ordered gaskets. My daughter figured it out .15 min for installation.Refrig has a lot more years. Read more

Replaced defrost sensor in freezer compartment, if you are handy this is a do it yourself job. The cover in the freezer section just pops out not tools needed. You will need a few small zip ties and some cutters to remove the old zip ties. Take a picture were the old sensor was before removing and reinstall in the same place. I used a meter to check continuity of the defrost element and found the element to be ok. I was quoted $85 to have someone come to the house just to check the unit and... Read more

Once I was convinced that the water supply and filter wasn't the problem, I took the back protective panel and looked at the valve assembly. It looked corroded, especially on top where the ?pistons for the solenoids?would project into. I ordered the part and it was on my doorstep in TWO days...really fast. The part was slightly different from the one that I was replacing in that the part was "angled out." This was not a problem. All that did was tilt the fitting for the copper water line... Read more

Was able to diagnose problem at AppliancePartsPros.com by entering the model #. This is apparently a common problem with this Refrigerator Replaced Light Socket Assembly, Lamp Reflector, Lamp Case and Lamp Cover. Also replaced the main circuit board (not sure if this was necessary). The wiring on the Light Socket Assembly was different than the original, so it was a bit confusing how to assemble it, and no screws were provided to attach it to the Lamp Reflector - figuring this out took most... Read more

Ordered parts, removed top tray in freezer, popped the back inside freezer panel out removed and replaced fan, dampers and fan housing. Took about 15 minutes. Read more

I removed the defrost sensor assembly, installed a new one, it worked. Because of a shipping problem with FEDEX, Appliancepartspros resent the parts not once but twice. Needless to say, they are my go-to source for parts from now on. Read more

The old filter head was broken at the supply line side connector fell out. The clicking noise eventually caused the fridge to warm up and stop cooling. The clicking was the overload relay tripping. The Start solenoid on the compressor was an Embarco TSD part 513604044. APP does not have that part nor does any else found a similar one on ebay but I ordered the PTC assembly 6749C-0014E. I removed the overload relay and capacitor from the TSD used two pieces of wire and connectors to create the... Read more

Removed the freezer drawers, ice maker, and panel that the fan motor is attached to. Changed out the fan motor reinstalled everything and plugged it in, and presto. I had ordered the control board just in case but didn't need it. The fan motor wasn't the easier part to replace but it was the cheaper of the two. Because the old motor would run for just a short time I assumed that it wasn't sending a signal back to the control board telling it that it was running. I was right!! Read more