830781 Light Lens Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

Best Seller

Genuine Frigidaire part

Dryer Drum Belt

4.9 (681)

By: Frigidaire

Part Number: 134503600

The Dryer Drum Belt is an OEM replacement part designed for use with Frigidaire dryers. This critical component is responsible for turning the drum of your dryer, allowing your clothes to tumble freely and dry evenly.

Causes of a bad Dryer Drum Belt can include wear and tear from regular use, overloading the dryer, which puts extra strain on the belt, or exposure to excessive heat, which can cause the belt to become brittle and break.

Symptoms of a bad Dryer Drum Belt include:

The dryer motor running but the drum not turning
Unusual noises, such as thumping or squealing, coming from the dryer when it is running
The dryer not starting at all, in some cases

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models, ensuring a wide range of users can benefit from its reliable operation.

NOTE: Please note that this dryer drum belt is sold individually. Any additional parts or hardware will require additional purchases.

This part fixes the following symptoms

Will not tumble

Do-It-Yourself Stories from Customers like You After 7 years of quiet service the dryer drum started squeaking very loud! Douglas D. • Columbia , MO • March 08, 2016

I found a video on Youtube which described dryer drum squeaks as most likely caused by a worn rear drum bearing. I located the model number on the inside lip of the dryer door: Frigidaire Affinity LEQ6000ES2. I googled "frigidaire affinity dryer squeak". I got a link for my friends at AppliancePartsPros.com! I've used Appliance PartsPros 3 times before, so I figured I was in a "one-stop-solution" situation. I ordered a rear drum bearing kit as well as a dryer drum belt (after nearly 7 years... Read more

$14.95

Compare At:: $17.79
You Save:: $2.84

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Frigidaire part

Rear Drum Bearing Kit

4.9 (874)

By: Frigidaire

Part Number: 5303281153

The Rear Drum Bearing Kit is an OEM replacement part for Frigidaire dryers. It contains a set of parts responsible for supporting the rear end of the dryer drum, allowing it to rotate smoothly and efficiently during the drying cycle.

Symptoms of a faulty Rear Drum Bearing Kit include:

Excessive noise or grinding sounds coming from the rear of the dryer
Difficulty in rotating the drum or drum not turning at all
Visible signs of wear or damage on the existing bearings
Increased vibrations or shaking during the drying cycle

Causes of needing to replace the rear drum bearing kit can include normal wear and tear over time, exposure to excessive heat or lint buildup, or physical damage due to impact or overloading.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore dryer models.

NOTE: The metal plate holes are not threaded. Use the self-tapping screws provided in the kit to thread the plate.

This part fixes the following symptoms

Noisy
No heat or not enough heat
Marks left on clothes

Do-It-Yourself Stories from Customers like You After 7 years of quiet service the dryer drum started squeaking very loud! Douglas D. • Columbia , MO • March 08, 2016

$44.95

Compare At:: $53.49
You Save:: $8.54

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

40W Light Bulb

4.9 (493)

By: Whirlpool

Part Number: 8206232A

The 40W Light Bulb is an OEM replacement part for Whirlpool microwave ovens. It is a standard-size bulb designed to provide illumination inside the microwave cavity, allowing you to easily view and monitor the cooking or reheating process.

Symptoms of a faulty microwave light bulb include:

Dimming or flickering light during operation
Complete bulb failure or no illumination within the cavity
Discoloration or physical damage to the bulb itself

Causes of a bad microwave light bulb can include normal wear and tear over time, electrical surges or voltage fluctuations, or physical impact or vibration during use.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore microwave oven models.

Do-It-Yourself Stories from Customers like You Several keys on the touchpad unexpectedly stopped working (ie start cancel setup vent fan light cook reheat soften/melt & defrost quick defrost) George W. S. • Kennesaw , GA • October 08, 2016

After extremely poor support from WhirlpooI and researching numerous U-Tube videos, I fully troubleshot potential failed components and connections. All appeared to function properly, so I reassembled the unit and experienced the same problem as before. I then narrowed down the problem to either the Touchpad ($57+$8 shipping) or the control board ($295+shipping). If those did not work, then a new Microwave of better quality, reliability and support than original microwave, Unfortunately,... Read more

$8.37

Compare At:: $9.88
You Save:: $1.51

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Frigidaire part

Compressor Run Capacitor

4.8 (74)

By: Frigidaire

Part Number: 5304464438

The Compressor Run Capacitor is an OEM replacement part for Frigidaire refrigerators. This electrical component is essential for providing the necessary torque to start and maintain the operation of the compressor motor, which is responsible for cooling the refrigerator.

Symptoms of a failing compressor run capacitor include:

The refrigerator not running or cooling properly
The compressor failing to start or running intermittently
Humming or buzzing noises coming from the compressor area

Causes of needing to replace the compressor run capacitor can include normal wear over time, exposure to high temperatures or electrical surges, or physical damage to the capacitor itself.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore refrigerator models.

This part fixes the following symptoms

Won't start
Too warm
Fridge too warm
Freezer section too warm

Do-It-Yourself Stories from Customers like You My Frigidaire frost free commercial freezer was screeching louder than the wheels on my radio flyer red wagon when it was overloaded with 5 cent return for deposit coca cola bottles back in the 1960's Daniel G. • El Paso , TX • January 24, 2021

In short - I replaced the evaporator fan motor and the evaporator fan blade. The Appliance Parts Pros website was extremely helpful to me. Here's how. 1. The site helped me identify that even though my Freezer says it's a Frigidaire, it's actually an Electrolux. 2. The site identified the potential screech causing parts. (I didn't take a chance, I bought all three) It was a worthwhile investment. My freezer is 20 years old so it deserved some help. 3. The site provided guidance videos (not... Read more

$36.95

Compare At:: $44.34
You Save:: $7.39

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Charcoal Filter

4.9 (262)

By: Whirlpool

Part Number: 8206230A

This Charcoal Filter is an OEM replacement part for Whirlpool microwaves. The charcoal filter is responsible for improving the air quality in the kitchen by removing impurities and odors from the air. It is used to remove smoke, grease, and cooking odors as it is drawn up through the vent fan. By trapping these particles, the filter helps maintain cleaner air in the kitchen and prevents odors from recirculating and affecting the taste and smell of your food.

Causes of a bad Charcoal Filter include saturation from absorbing smoke and odors over time, accumulation of grease and particles that clog the filter, leading to decreased effectiveness, and physical damage that compromises its ability to filter air properly.

Symptoms of a bad Charcoal Filter include:

Persistent odors in the kitchen after cooking.
Smoke not being effectively vented out during microwave use.
Reduced airflow from the microwave's venting system.

Replacing the charcoal filter at regular intervals or when these symptoms are noticed ensures that your microwave continues to operate efficiently and keeps your kitchen air clean. This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

Description- Color: metallic. Measures about 5 inches wide by 5 inches deep.

This part fixes the following symptoms

Exhaust fan not working

Do-It-Yourself Stories from Customers like You Low airflow through vent; filter service indicated on display Brent E. • Mountain View , CA • March 20, 2014

Replacing this filter was very easy: two screws hold in the grill cover at the top of the microwave, and then the filter just slides in and out of its holder. There was quite a bit of grease in the area, probably pulled there by the vent from the stove top. I cleaned the grease up and also hand-washed the wire-mesh filter on the bottom of the microwave with soap and warm water. Airflow when running the vent is now noticeably better. Read more

$15.66

Compare At:: $18.64
You Save:: $2.98

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Frigidaire part

Drum Bearing

4.9 (80)

By: Frigidaire

Part Number: 131825900

The Dryer Drum Bearing is an OEM part for Frigidaire dryers. It supports the dryer drum, ensuring smooth rotation during the drying cycle. This part attaches to the inside of the rear panel of the cabinet, offering support to the dryer drum.

You should replace the drum bearing if it becomes worn out or damaged. Causes of a bad drum bearing can include normal wear and tear, overloading the dryer, or lack of lubrication.

Symptoms of a bad drum bearing include:

Loud squeaking or grinding noises during operation
The drum not turning smoothly or becoming misaligned
Increased friction causing overheating or burning smells
The dryer not tumbling clothes properly

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This part fixes the following symptoms

Marks left on clothes
Noisy

Do-It-Yourself Stories from Customers like You Dryer would not turn on Kathie R. • Burlington , WI • January 15, 2016

The dryer is a Kenmore Laundry Center, model 417-99570150. Bought in 1998, so it is an older model. Not wanting to buy the newer ones that are out now. We opted to fix the Kenmore. Just believe the older models are worth fixing, if at all possible. Frist we had to figure out what parts we would need and if the cost would be worth our time. I went on YouTube: and type in Kenmore dryer not turning on. Watched several videos to narrow down the possible problem. Next step was to... Read more

$9.95

Compare At:: $11.94
You Save:: $1.99

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Frigidaire part

Freezer Door Key

4.9 (86)

By: Frigidaire

Part Number: 297147700

The Freezer Door Key is an OEM replacement part for Frigidaire refrigerators. This small but essential component is designed to securely lock the freezer door, preventing accidental openings or unauthorized access.

Symptoms of needing to replace the freezer door key include:

Difficulty in locking or unlocking the freezer door
The key not fitting properly or becoming stuck in the lock
Visible wear, damage, or breakage of the key itself

Causes of a faulty freezer door key can include normal wear and tear over time, physical damage due to impact or mishandling, or issues with the locking mechanism itself.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore refrigerator models.

Do-It-Yourself Stories from Customers like You The seal around the door was not sealing Ron W. • Bakersfield , CA • September 22, 2014

Ordered a new seal, and replaced it with a new one freezer works great now. Read more

$10.95

Compare At:: $13.14
You Save:: $2.19

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Microwave Door Interlock Switch

4.8 (45)

By: Whirlpool

Part Number: W10269458

The Microwave Door Interlock Switch is an OEM part for Whirlpool microwaves. This safety device ensures that the microwave only operates when the door is securely closed. The interlock switch prevents the microwave from running with the door open, protecting users from exposure to microwave energy.

You should replace the door interlock switch if it becomes faulty or damaged. Causes of a bad switch can include wear and tear from frequent use, electrical malfunctions, or physical damage from slamming the microwave door.

Symptoms of a bad microwave door interlock switch include:

Microwave not starting or running intermittently
Microwave running with the door open
Error messages or safety warnings
The interior light not turning on or off properly

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Light flickering when open door & stays on when door opened Jo B. • Vandalia , OH • March 01, 2020

After checking other reviews, we decided it was best to replace the interlocks, cam and all three switches. You're going to need a phillips screwdriver, star driver, small screwdriver and needle nose pliers. You need to remove the ONE Phillips screw above the control panel inside the vent. The contol panel is on hinges that you can slide up and towards you. Using caution remove the wires noting how they're connected. Pinch the top of the white connectors and wiggle them free. We couldn't get... Read more

$30.95

Compare At:: $37.14
You Save:: $6.19

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Frigidaire part

Dryer Gas Valve Coil Kit

4.9 (159)

By: Frigidaire

Part Number: 5303931775

The Dryer Gas Valve Coil Kit is an OEM part for Frigidaire dryers. This kit includes solenoid coils necessary for the opening and closing of the gas valve during the drying cycle. These coils are vital for controlling the flow of gas into the burner, enabling the ignition and maintaining the flame required to dry clothes effectively.

Symptoms of a bad Dryer Gas Valve Coil Kit include:

No heat or insufficient heat in the dryer.
The dryer stops heating partway through the cycle.
A "clicking" noise when the dryer attempts to ignite the gas flame but fails.
Gas smell from the dryer, indicating incomplete combustion.

Causes of a bad coil kit can include electrical failure within the coils, mechanical wear from repeated use, or overheating that damages the coil's integrity.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This part fixes the following symptoms

No heat or not enough heat
Takes too long to dry

Do-It-Yourself Stories from Customers like You Our dryer didn't heat Larry L. • Poway , CA • November 10, 2014

Being a complete DIY I hate to call some unknown person into my home knowing that just to get them there will cost me more than I will spend for parts that I don't need.After all, they are trying to make a living and by selling me parts that I don't need will increase their profits. I've dealt with APP before and was impressed by their site because I could find both mechanical and electrical drawings for almost everything I have. I looked up my dryer, decided what was probably the problem,... Read more

$23.95

Compare At:: $34.51
You Save:: $10.56

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Frigidaire part

Door Catch

4.9 (71)

By: Frigidaire

Part Number: 131658800

The Door Catch is an OEM part for Frigidaire dryers. It secures the door closed during cycles. This allows the machine to safely run without the risk of the door opening, which could pause the drying process or pose a safety hazard. Constructed from durable materials, this door catch is designed to endure the frequent opening and closing of the dryer door, offering reliability and longevity.

Causes of a bad door catch include mechanical wear from regular use, accidental damage, or misalignment of the door.

Symptoms of a bad Door Catch include:

The dryer door won't stay shut during cycles
Difficulty closing the dryer door securely
The need to apply extra force to close the door
The dryer stops running due to the door opening mid-cycle

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This part fixes the following symptoms

Door won't close
Won't start

Do-It-Yourself Stories from Customers like You Drum stopped turning loud 60 hz hum from motor James S. • Winchester , TN • November 03, 2018

The very easy diagnosis was motor seizure. Because the machine is about a decade old, I decided to renovate most of the guts. My DIY project included replacing the motor, blower, drum bearing, belt, and door hinge. The end result is a functional dryer with no left-over parts. Lack of parts and hardware challenged the effort. For example, the blower assembly did not have the slide capture for the motor. I had to use the old one which is showing its age. With the exception of the drum... Read more

$50.78

Compare At:: $59.92
You Save:: $9.14

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Bottom Interlock Support

4.9 (21)

By: Whirlpool

Part Number: WPW10156813

The Bottom Interlock Support is an OEM part for Whirlpool microwaves. This component plays a crucial role in ensuring the microwave door latches securely, maintaining a proper seal for safe and efficient operation.

Over time, the bottom interlock support can wear out or become damaged due to regular use, physical impact, or issues with the door mechanism. A faulty interlock support can compromise the microwave’s safety features and proper functioning.

Symptoms of a bad bottom interlock support include:

The microwave door not closing properly or securely
The microwave not starting or stopping unexpectedly
Error messages related to door latch or interlock issues
Visible damage or wear on the interlock support

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Light flickering when open door & stays on when door opened Jo B. • Vandalia , OH • March 01, 2020

$10.95

Compare At:: $12.92
You Save:: $1.97

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Microwave Top Interlock Support

4.8 (26)

By: Whirlpool

Part Number: WP8206419

The Microwave Top Interlock Support is an OEM part for Whirlpool microwave ovens. It is an essential safety component that helps ensure the microwave door is securely closed and locked before the microwave can operate.

Causes of a faulty Top Interlock Support include physical damage from impact or wear over time, as well as failure of the internal mechanisms that detect the door's position.

Symptoms of a bad Microwave Top Interlock Support include:

Microwave does not start or operate when the door is closed
Door appears closed but microwave will not run
Microwave starts with the door open, posing a safety hazard
Error codes related to the door interlock system

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Light flickering when open door & stays on when door opened Jo B. • Vandalia , OH • March 01, 2020

$18.95

Compare At:: $22.55
You Save:: $3.60

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Grill Vent

5.0 (118)

By: Whirlpool

Part Number: W10259625

The Grill Vent is an OEM part for Whirlpool microwaves. This part allows for the release of excess heat and steam during cooking. This vent helps to maintain optimal operating temperatures and prevents overheating, ensuring that your microwave operates efficiently and safely.

Over time, the grill vent can become clogged with grease and food particles, reducing its effectiveness and potentially causing the microwave to overheat. In addition, physical damage, such as warping or cracking, can occur from exposure to high temperatures or accidental impact.

Symptoms of a bad Grill Vent include:

Reduced effectiveness in venting steam and heat
The microwave becoming excessively hot to the touch
Unpleasant odors due to trapped grease and food particles
Visible damage or deformation of the vent grill

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Do-It-Yourself Stories from Customers like You Broken plastic vent grill on top of microwave Joe M. • Fort Collins , CO • March 20, 2015

Removed old broken grill, uses only 2 screws on top and 3 tabs on bottom to be installed. Was careful not over tighten top screws as the plastic tabs on top that have the holes for the 2 screws can be broken if fastened too tightly. Took about 5 minutes to complete. Read more

$48.95

Compare At:: $59.21
You Save:: $10.26

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Microwave Top Mounting Screw

4.8 (16)

By: Whirlpool

Part Number: WP8169704

This OEM microwave top mounting screw is for mounting microwave ovens to upper cabinets. Replace if you've lost one of the original mounting screws or they've become damaged. This gold screw made of heavy-duty metal can be installed with a screwdriver and socket set. Measuring approximately 3 inches in length, this top mounting screw is sold individually.

The mounting bracket assembly requires two mounting screws. Make sure to order the number needed for your microwave oven. Remember to unplug your microwave before installing the mounting bracket assembly. Tighten the mounting screw with the screwdriver, being careful not to overtighten it. This can strip the threads on the screw.

Choose this OEM replacement part to ensure a secure and safe installation. It's designed to fit microwaves from top brands such as Whirlpool, Roper, Estate, Inglis, Maytag, Amana, and KitchenAid.

Do-It-Yourself Stories from Customers like You Bought used microwave and needed mounting parts Robert M. • New Lebanon , OH • April 25, 2016

Installed mounting bracket. Redrilled top screw holes. No template for hole locates but plenty of options to make sure you get a stud. Very easy to install. Read more

$8.36

Compare At:: $9.86
You Save:: $1.50

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Frigidaire part

Refrigerator Door Gasket Clips

4.8 (12)

By: Frigidaire

Part Number: 5304406520

The Refrigerator Door Gasket Clips are OEM parts for Frigidaire refrigerators. These clips secure the door gasket in place, ensuring a tight seal to maintain the internal temperature and prevent cold air from escaping. This pack contains 40 clips, which secure the interior trim pieces and hold the gasket and liner to the freezer lid.

Over time, the gasket clips can become damaged or worn out due to frequent opening and closing of the refrigerator door, exposure to moisture, or accidental impacts. If the clips fail, the door gasket may not stay in place, compromising the refrigerator's efficiency.

Symptoms of bad refrigerator door gasket clips include:

The door gasket not staying securely in place
Visible damage or wear on the clips
Cold air escaping from around the door
Increased energy consumption due to poor sealing

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

Do-It-Yourself Stories from Customers like You The seal around the door was not sealing Ron W. • Bakersfield , CA • September 22, 2014

Ordered a new seal, and replaced it with a new one freezer works great now. Read more

$72.41

Compare At:: $74.13
You Save:: $1.72

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Frigidaire part

Heat Sensor

4.8 (34)

By: Frigidaire

Part Number: 5303281135

The Dryer Heat Sensor is an OEM part for Frigidaire dryers. This sensor monitors the temperature inside the dryer drum to ensure clothes are dried effectively and safely by regulating the heat levels during the drying cycle.

Causes of a bad heat sensor can include wear and tear from frequent use, buildup of lint or debris, or electrical issues. A malfunctioning sensor can result in incorrect temperature readings, leading to under-drying or overheating of clothes.

Symptoms of a bad Dryer Heat Sensor include:

Clothes not drying properly or taking too long to dry
Dryer overheating or shutting off unexpectedly
Inconsistent drying cycles
Error codes related to temperature control

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This part fixes the following symptoms

No heat or not enough heat

Do-It-Yourself Stories from Customers like You Our dryer didn't heat Larry L. • Poway , CA • November 10, 2014

$38.95

Compare At:: $55.90
You Save:: $16.95

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Appliance

Appliance

Lawn & Garden

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Need help finding dishwasher parts?

830781 Light Lens Parts

Dryer Drum Belt

Rear Drum Bearing Kit

40W Light Bulb

Compressor Run Capacitor

Charcoal Filter

Drum Bearing

Freezer Door Key

Microwave Door Interlock Switch

Dryer Gas Valve Coil Kit

Door Catch

Bottom Interlock Support

Microwave Top Interlock Support

Grill Vent

Microwave Top Mounting Screw

Refrigerator Door Gasket Clips

Heat Sensor