9445Jt1 Parts

This starter rope is a genuine MTD part, sold individually. This starter rope can be used as a replacement part in a string trimmer. The purpose of a starter rope in a string trimmer is to give the operator a component to pull to engage the pull-start mechanism of the appliance, which loops around the pulley and facilitates the powering on of the small engine of the string trimmer.The starter rope in a string trimmer is a crucial component of the pull-start mechanism that might need to be replaced if the starter rope suffers damage from general wear and tear with long-term use or as the result of an accident. If the starter rope is sufficiently frayed, punctured, ripped, scraped, torn, or otherwise damaged to the point that it cannot function, the starter rope should be removed and replaced by this genuine OEM replacement part.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This starter rope is compatible with the following outdoor appliance brands: MTD, Craftsman, and Weed Eater.

This certified OEM replacement part is a carburetor kit for a gas-powered leaf blower engine. For gas to ignite in an engine, there has to be the right amount of air in the system. Without oxygen, the spark won't light and the gasoline will not ignite. A carburetor is responsible for maintaining the right balance of air and gasoline. Therefore, without a properly functioning carburetor, the engine will also not function properly. Carburetors begin to break down over time because of built up exhaust and gunk in the engine. As this grime builds up, the carburetor cannot get enough air and the balance is thrown off. While carburetors can sometimes be cleaned, if it has become overly clogged or damaged, it will need to be replaced. Signs of a faulty carburetor include shakiness and black smoke, backfiring, hard starts, or an engine that will not start at all. Replacing a leaf blower's carburetor requires the crankcase line, primer line, fuel line, air filter, and throttle linkage to all be disconnected using pliers and a screwdriver. This part is intended for Craftsman, Poulan, Weed Eater, and Husqvarna leaf blowers and is sourced from the original manufacturer. It ships individually.

This is a starter pulley that is used with various types of string trimmers from major manufacturers.The pulley keeps the starter rope in the right location so that the chainsaw comes on and offers cutting power. Through wear and tear or impact, the starter pulley can break or become damaged.If a user pulls the starter rope and the engine does not start, the starter pulley may not be working correctly. It will need to be replaced. Before the replacement is made, make sure the tool is turned off and the spark plug wire is disconnected. The starter pulley and rope can be reached by disassembling the trimmer. The recoil spring should be rewound before the rope is threaded back in.This starter pulley is an authentic OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual part. The component is made for use with string trimmers manufactured by Turf King, Craftsman, Paramount, Weed Eater, Poulan, and Poulan Pro.

The lower shaft replacement is used for lawn and garden equipment such as trimmers, gas trimmers, and pruners. The shaft is the part that will hold the spool used on these types of equipment. It also connects to the upper shaft.Some of the common problems with the lower drive shaft include worn drive shaft ends, worn bushing, breaks along the metal, or damage to the outer tube. Owners should replace the lower shaft before they use the machine. Continuing to use a trimmer with a broken lower shaft is dangerous and could result in injury or more damage to the machine. The replacement of the lower shaft is relatively simple and will require only a few tools.The replacement part works with certain models of trimmer and pruner from Husqvarna, Weed Eater, and Poulan. This is a genuine OEM replacement part sourced from the manufacturer. The kit is sold individually.

This is a shield kit that is used on string trimmers from two major manufacturers. It is responsible for securing the cutter head and preventing grass clipping from landing on the user of the trimmer. The shield kit comes with the shield itself, two screws, a line limiter, a bolt, and a wing nut. This is an important component but it can become broken, damaged, or lost and will need to be replaced before continued use.If a visual inspection of the shield shows cracks, holes, or other damage, it should be replaced. The wing nut will need to be removed from the shield guard before it can be removed. Place the new shield using the mounting bolt. The line limiter can be installed using the included screws. Make sure the guard is lined up on the shaft before tightening the wing nut to the bolt.This is a replacement shield kit that is an authentic OEM part sourced directly from the manufacturer. It is sold as an individual kit. The shield kit can be used with string trimmers created by Poulan, Husqvarna, and Weed Eater.

The carburetor takes in air and fuel from the engine and mix them together, sending them through a butterfly valve into the engine. Though the carburetor has filters in place, it can still become clogged or damaged over time. It may just wear out and stop working. Assess the carburetor by putting fuel directly into the carburetor and starting the engine. If the engine dies as soon as it starts, it's likely the carburetor needs to be replaced. This carburetor assembly manufactured by Poulan for use in select lawn and garden equipment engines can provide the ideal replacement part. Be sure to disconnect the spark plug before beginning any engine work and always wear gloves. Drain the fuel system when replacing this part for safety and ease of repair. This OEM replacement can be used in Weed Eater and Poulan gas trimmers with compatible model numbers. It will work with about a dozen trimmers and pruners from these two brands. This part is sold individually as a full assembly, including the primer bulb.

This carburetor is an original OEM part sourced directly from the manufacturer, Husqvarna. It is sold individually. A carburetor is designed for use with pieces of outdoor lawn and garden power equipment with small engines such as trimmers and string trimmers. It is compatible with products by brands such as Craftsman, Weed Eater, and Poulan.Having an OEM carburetor is crucial if the time comes to rebuild or replace the machine's carburetor. The purpose of the carburetor is to mix air and fuel in the proper air-to-fuel ratio for internal combustion engines. The replacement or repair process is necessary when the carburetor fails to perform as expected. Any number of symptoms could indicate a faulty carburetor, ranging from poor engine performance to black smoke from the exhaust. Other indicators of a bad carburetor include backfiring, overheating, and hard-starting. When using the carburetor kit to repair or replace the machine's carburetor, be sure to complete the work in a well-ventilated area. It is essential that anyone involved in the rebuild knows to drain any leftover fuel from the tank and fuel lines prior to beginning the rebuild process. It's also important that the repair person or repair team wears proper safety equipment throughout the installation process, such as work gloves to protect the hands.

This replacement part is a drive shaft intended for use in lawn mowers or edgers. This is a genuine replacement part made by Husqvarna. Drive shaft assemblies are an important part of line trimmers. This part is responsible for rotating the cutting head on the appliance so that the user is able cut a clean line while trimming grass. A new drive shaft might be needed if the user notices that the cutting head is no longer rotating, or is unable to start. If the cutting head stops spinning in the middle of using the appliance, the drive shaft might need replacing. Be sure the appliance is completely powered down and cooled off before attempting to replace this part.This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with line trimmers or edgers made by Husqvarna.

This part is a handlebar clamp that is used on line trimmers and edgers. The purpose of the handlebar clamp is to essentially clamp the handlebar to the tube shaft. This component can be adjusted up or down along the length of the tube.A new handlebar clamp will be needed if the original is cracked, broken, missing, or damaged in any way. This component may become damaged over time due to normal wear and tear over a period of time. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment. Never perform care and maintenance on outdoor power equipment that is powered on.This handlebar clamp is a genuine Husqvarna part. It is sold individually. This particular handlebar clamp is compatible with line trimmers and edgers that are manufactured by Husqvarna, Poulan, and Weed Eater.

This part is a replacement washer. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken or misplaced washer in a variety of outdoor power equipment, although it is primarily intended for use with line trimmers. Washers provide a better bearing surface for a screw or bolt. Over time, washers can easily become corroded, broken, or misplaced, requiring replacement. It's important when working on or near any engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this washer, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this washer is suitable for use on several models of line trimmers and other outdoor power equipment manufactured by Husqvarna, Poulan, and other brands. This is a genuine part made of high-quality, durable metal and is sold individually.

This replacement part is a spool assembly. This is a genuine replacement part made by Husqvarna. This part is typically used with line cutters or edgers. The spool and line work to help the user create a straight line and stay consistent and steady when completing a job. A new spool assembly might be needed if the current one is missing or damaged in any way. This can mean that the spool itself has become dented, cracked, or bent. This can cause issues in dispensing the line and cause the part to need replacing. This should be a simple repair or replacement and only require common household tools. This spool assembly is a genuine OEM replacement part to ensure proper fit and long-lasting use. This part is sold individually and is sourced directly from the manufacturer.

This glide plate is compatible with a variety of Craftsman string trimmers for lawn and gardens. It attaches to the cutting head of the machine to ensure the cutting line is secure as it goes into the cutting head. This glide plate is made of durable plastic but regular use can cause wear and tear and the plate may become damaged. If the glide plate is knocked into other items, this can also damage it and prevent it from doing its job. If the glide plate needs to be replaced because it is damaged, cracked, or broken, the process is simple. First, make sure the string trimmer is turned off and place it on a level surface where work can be done. Reach down to the bottom where the part is located and slide it off of the machine. Once it has been removed, the new component can be installed in the opposite way. After installation, the trimmer can be used again.This is a genuine OEM replacement glide plate that is sold on an individual basis. The part is designed for use with several string trimmers by Craftsman.