970-686724 Parts

Plastic door cover

Inner door panel kit restores the refrigerator door interior, covering the cavity and providing mounting surfaces for bins and gaskets. Replacing a cracked or warped inner panel improves appearance and helps ensure door components fit correctly. What it does:

• Replaces a damaged, cracked, or warped inner door panel to restore the door's interior surface.
• Provides mounting surface for door bins, shelves and the door gasket so components sit securely.
• Helps cover and protect insulation and internal door wiring or components from damage.
• Common symptom fix: visible cracks, deep stains, loose door bins, or a warped liner that prevents proper gasket seating.

• Disconnect power to the appliance and remove food and loose items from the door before starting.
• Some disassembly of the door liner may be required; retain any fasteners, clips, and trim for reuse.
• Avoid damaging insulation, wiring, or the door gasket while removing and installing the panel.

Spider arm is not available separately.

This evaporator fan cover protects and directs airflow around the evaporator fan to help maintain proper cooling and reduce fan noise. Replacing a damaged cover restores airflow and helps prevent fan interference from ice or debris. What it does:

• Channels cold air from the evaporator across the compartments for more even cooling.
• Shields the evaporator fan from ice buildup, frost, and loose insulation that can block airflow.
• Prevents fan blade contact with debris or wiring that can cause scraping, rattling, or excessive noise.
• Common symptoms: poor or uneven cooling, loud/scraping fan noise, visible cracks or broken mounts on the cover.

• Disconnect power to the appliance before starting any repair.
• Remove the freezer/refrigerator access panel and any shelves; handle sharp sheet metal carefully.
• Inspect the fan blade and motor while the cover is off; clear any ice or debris and ensure the fan turns freely before reassembly.
• Ensure the replacement cover seats securely and any mounting tabs align to restore proper airflow direction.

This temperature control knob replaces a worn or broken fridge temperature dial so you can set the refrigerator temperature accurately. It restores a solid grip and clear pointer for reliable, easy adjustments. What it does:

• Fits onto the temperature control shaft to select colder or warmer settings
• Provides a clear pointer for precise temperature selection
• Replaces cracked, stripped, or missing knobs that make adjustments difficult
• Helps eliminate loose or slipping knob operation

• One temperature control knob

• Push-fit installation onto the control shaft; no special tools typically required
• Ensure power is off and remove food before working in the appliance for safety
• Inspect the control shaft for damage; replace the control if the shaft is stripped

A replacement white timer knob that restores tactile control for your appliance's timer and selector shaft. Simple cosmetic and functional replacement when the original knob is worn, cracked, or won't engage the timer. What it does:

• Replaces a damaged or missing timer/selector knob so you can set and adjust the appliance timer
• Provides a secure grip and clear pointer for accurate time selection
• Fixes symptoms such as a loose, cracked, or spinning knob that won't turn the timer
• Restores normal user control without replacing the entire control assembly

• Generally installs by pulling the old knob straight off the shaft and pressing the replacement onto the splined stem
• Match the knob splines to the control shaft before seating; do not force if alignment feels wrong
• Disconnect power (or unplug appliance) before servicing controls to avoid electric shock

For seal only use part number 131901400.

This is a timer that is used on washing machines. It controls the electrical components and the length of time of the washing machine's cycles. Be sure to unplug the appliance from the electrical outlet before beginning repairs. Some people performing the replacement or repair may wish to wear work gloves to protect their hands. The replacement process only takes about ten minutes to complete from start to finish.When the timer will not advance, it is likely that the washing machine cycles will not run at all or won't run consistently. The appliance may not advance through the various cycles like the washing, rinsing, and spinning cycles and may get stuck on one of the cycles. This timer is compatible with washing machines that are manufactured by Kenmore, Gibson, Westinghouse, and Frigidaire. It is sold individually and is sourced directly from the manufacturer and a genuine OEM part.

Fixed rollers with leveling screw for the right hand side. For left hand, order part 241889002.

This rubber lid bumper cushions the washer lid to prevent hard contact and reduce noise and wear. It replaces a worn or missing bumper to help the lid close more softly and sit level. What it does:

• Acts as a soft contact point between the lid and cabinet to absorb impact
• Reduces lid slamming, rattling, and vibration during operation
• Helps keep the lid aligned and prevents cosmetic damage to the rim
• Commonly replaced when the bumper is cracked, flattened, or missing

• One rubber lid bumper

• Install by removing the old bumper and pushing the new bumper into the mounting hole or recess; hand tools may be helpful
• Ensure the appliance is powered off and disconnected before servicing
• Inspect surrounding mounting area for damage and replace any broken retainers as needed
• If the bumper is hard to seat, warm it briefly with a hair dryer to improve flexibility

This rubber grommet cushions and protects components by isolating vibration and preventing wear where parts pass through openings. It restores proper fit and reduces noise or rubbing caused by a worn or missing grommet. What it does:

• Cushions panels, housings, or shafts to reduce vibration and noise
• Protects wiring, hoses, or metal edges from abrasion where they pass through openings
• Keeps assemblies aligned by filling mounting gaps and securing components
• Common symptom: increased rattling, vibration, or chafing around the affected area

• One rubber grommet

• Disconnect power to the appliance before beginning any repair
• Remove panels or components as needed to access the grommet; hand tools may be sufficient
• Inspect surrounding parts and replace any damaged items
• Use the OEM-style grommet to ensure proper fit and function

This pressure hose and adapter assembly routes water under pressure to the appliance's dispenser/icemaker, restoring proper water flow for ice and dispense functions. It's a direct-fit replacement that reconnects the water line safely. What it does:

• Carries water from the supply valve to the icemaker or dispenser
• Restores proper water flow when original hose is cracked, split, or leaking
• Helps stop visible leaks and pressure loss in the supply line
• Matches OEM routing and connection points for a secure fit

• Disconnect power and shut off the water supply before beginning work
• Inspect fittings and seals; replace if damaged or corroded to prevent leaks
• Use appropriate wrenches; avoid overtightening plastic fittings

This molded cabinet liner insulation reduces heat transfer around the refrigerator cavity to help maintain steady temperatures and improve cooling efficiency. Designed to replace worn or damaged insulation that can allow frost buildup or increased run time. What it does

• Fills the airspace between the outer cabinet and inner liner to slow heat gain
• Helps the cooling system maintain consistent internal temperatures
• Can reduce frost accumulation caused by damaged or missing insulation
• Restores the original thermal barrier after repair or after removing interior components

• One pre-formed cabinet liner insulation piece

• Disconnect power to the appliance before starting any repair
• Remove shelves, panels, and fasteners as needed to access the insulation cavity
• Handle gently to avoid compressing or tearing the material; fit into existing channels or adhesive points
• If adhesive is required, use manufacturer-recommended high-temperature adhesive or fasteners

This top-front bracket secures the appliance's top or front panel in place to keep panels aligned and stable. Replacing a damaged bracket restores proper panel fit and reduces rattling or loose trim. What it does:

• Mounts and supports the top/front panel to the appliance frame
• Prevents panel movement that can cause noise or misalignment
• Helps maintain correct door or control-panel fit where applicable
• Used when bracket is bent, cracked, or missing mounting holes

• One top-front bracket

• Disconnect power (and water, if applicable) before starting any repair
• Remove necessary trim or panels to access the bracket; retain original fasteners unless new hardware is supplied
• Align bracket and reinstall screws securely; avoid overtightening to prevent strip-out
• If other mounting hardware is damaged, replace it to ensure a secure fit

This spring assembly restores proper tension to the mechanism it attaches to, helping the component open, close, or return smoothly and reliably. It replaces a worn or broken spring to eliminate binding, sagging, or uneven movement. What it does:

• Provides restoring tension for the linked mechanism so moving parts return to the correct position
• Replaces broken, stretched, or corroded springs that cause sagging, sticking, or uneven operation
• Helps restore smooth opening, closing, or return action and reduces noise from loose components
• Prevents further wear on connected parts by keeping the mechanism correctly tensioned

• Disconnect power (or unplug appliance) before starting any repair to avoid shock or injury
• Springs are under tension; use appropriate tools and caution to avoid slipping or sudden release
• Follow OEM instructions or service manual for proper routing and secure attachment points