Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Washer making loud metal grinding noise during spin? The transmission converts motor power into drum agitation. Moderate difficulty repair with video guide.
I knew from the loud sound during the spin cycle that the bearings were going out, I ordered a gearcase part number W11455453 (AP6993918) which has the bearings, tub seal, and shaft altogether which makes the repair much easier to complete. I will say you should also order the spanner wrench it makes taking the spanner nut off and putting back on much easier also, part number TB123B (AP6832671). With this model washer, you don't have to take the tub out you just need to take the washer plate... Read more
Suspension bearing kit supports the tub assembly in top-load washers. Replace if bearings are worn, cracked, or causing excessive tub movement or noise.
After looking up the model number of my washing machine on AppliancePartsPros.com I ordered the suspension rod kit, two sets of tub centering springs (one spring per corner), a Ring-Tub (mine was breaking apart due to banging around) and a spare suspension bearing kit in case I need it later. I spoke to a very helpful customer service rep on the phone just before placing my order. They have customer service representatives answering the phone late at night. I was surprised. All of my parts were... Read more
Fix a washer that won't agitate or makes loud noises. This mounting screw secures the wash plate to the drum. Easy 2-minute DIY repair with a socket wrench.
Replaced it with a new wash plate. Read more
Fix F5 error codes with this washer lid latch assembly. Secures lid during wash cycles and engages door switch. DIY-friendly replacement part.
Replaced the door latch/lock assembly. Read more
Fix a washer that won't fill, fills slowly, or overfills with this water inlet valve. Controls hot and cold water flow into the tub. 20-30 minute repair.
I had an authorized Whirlpool service tech come to look at problem diagnosed problem as water inlet valve leaking ordered the part. After 11 days I was told part was on backorder from Whirlpool. I ordered the part from you and received the next day and I installed it in approximately 20 minutes. Read more
Fix grinding noise, clicking sounds, or spin failure in your washer. This brake and clutch assembly typically takes 2-3 hours to replace.
We watched the videos posted on AppliancePartsPros.com website several times before starting the work. Once we were confident of the process, we jumped in with the complete disassembly of the washing machine's drum rotating assembly...everything that touched the drum or made it rotate. My son and I disassembled and inspected each part for wear/damage and ordered replacement parts based on condition. The parts came in within 3 days of ordering. My son and I took 3 hours to reassemble and... Read more
Replace your cracked, broken, or warped washer lid assembly. Covers the wash tub and hinges open for loading. Hinges sold separately. DIY installation.
Replaced lid. Read more
This washer drain pump moves water out of the washer during drain and spin. Replacing a worn or failed pump restores proper draining so cycles finish on time and the basket can reach full spin speed.
What it does
What’s included One drain pump assembly.
Install notes
This OEM drain pump is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Ordered the correct part/ Pump from this Awesome website and replaced the drain pump. Good to go!! Read more
Fix washer clicking noise, no agitation, or no spin. This clutch engages transmission for wash basket rotation. Moderate DIY repair, 1-2 hours.
Unplugged power cord, shut off hot and cold water valves, and disconnected hot and cold water lines. I taped the lid closed and laid washer down on its front panel to access motor parts underneath. Removed center screw (allen wrench) and then removed large, round, plastic rotor (had to use some force with fingers behind it to get it off). I could see that the gear teeth inside the rotor had been partially stripped off ruining the rotor (and causing the noise). I then removed the clutch... Read more
Fixes grinding noise during wash cycles or improper agitator movement. This washer secures the agitator shaft to the transmission. Moderate difficulty.
Connects washer lid to machine body for smooth opening and closing. Replace if hinge is rusted, corroded, cracked, or broken off the lid assembly.
Removed the screws, lifted the old lid out of the hinges. Replaced the hinges, set new lid in the hinges and replaced screws. Read more
Replacement lid hinge for top-load washers. Installs on the washer top to support the lid opening and closing. Needed when hinge is cracked, rusted, or broken.
Filters debris from water entering your washer and seals the hose connection. Replace if water fills slowly or screens are clogged. Confirm fit by model.
As a Mechanic, I did the common sense approach: INITIAL OBSERVATIONS & CHECKS: - Unplug Machine & check inlet water hose connections for leaks and signs of hose failure; - Remove back panel & inspect for water presence at all hose connections, pump, bottom of basket (bottom center of basket where the main motor, shaft bearing, and tub seal is located), dispensers, bottom of wash basket, water injector area, look everywhere where there is a hose connection and where water flows... - Inspect... Read more
Flexible tube that drains used water from your washer tub to the standpipe. Replace if cracked, leaking at connections, or torn along the length.
After not finding the needed parts to extend the hose at home depot, i turned to online help. I was able to find the right parts quickly on your site and was able to even watch a few videos on how to do the repair. I was beyond amazed that the parts arrived the next day, even though a Saturday and even with standard shipping. I was fortunate enough that my repair did not need any real explanation and the job was done in less than 10 minutes. Felt really good to be able to solve the problem,... Read more
Suspension rod kit connects washer drum to chassis for vibration control. Replace if rods are worn, broken, or detached causing instability during spin.
Washer won't drain or shows DRN code? This drain pump removes water from the tub each cycle. DIY-friendly repair with video guide included.
Its under warranty so I called Sears repair. The Technician determined the pump was bad order. After a month of waiting for Sears to order the part and the back and forth on the phone, I looked for the part myself. You guys sent the part and in 2 Days my washer is working again. No word yet, from Sears part order.. Read more