Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Ice maker not filling or dispenser not working? This water inlet valve kit fixes slow fill, no ice, and leaking issues. 20-30 minute DIY repair.
Replaced both primary and secondary water valves to make sure I fixed the problem. Both valves have to open when you function the water dispenser and when the ice maker tray needs refilling. YouTube video was a great help and let me know that I had to lengthen one hose. The video showed me the exact parts I needed to lengthen the hose. YouTube video also let me know that I had needed to transfer the internal springs in the hoses when I cut the old connections off. Never would have known... Read more
Freezer icing up or fridge warm while freezer works? The defrost timer controls defrost cycles. DIY-friendly fix in about 1 hour, saves $150+ on service.
I had had the same problem 4 or 5 years ago and spent close to $200 to repair it. I did have the slip from that repair with part #'s so I went ahead and ordered a defrost timer and thermostat. You-tube had plenty of videos on replacing those parts and even before they arrived I was able to add a switch and bypass the broken thermostat and start a cycle manually with the timer. (which it seems was was still functional). Between that and cycling some ice packs up from the still working... Read more
Fix a refrigerator that won't cool or clicks repeatedly. This compressor start relay powers the start winding to help your compressor run. DIY repair.
After running some tests I determined that the problem was a bad defrost timer. The timer would occasionally fail to trigger the compressor to restart at the end of the defrost cycle. Since I had the unit taken apart, I replaced the termination t-stat and the compressor start relay at the same time. Parts came quick 1.5 days, job completed and the unit is up and running. Read more
1/4 inch compression nut for securing plastic water lines in refrigerators and ice makers. Replace worn, cracked, or missing nuts to prevent leaks.
Ordered part from AppliancePartsPros.com and received it 2 days later. Put the part in, fit like a glove, water and ice cube maker working flawlessly again with no leaks. Thanks. Read more
Replacement mounting screw for securing range panels, brackets, and internal components. Replace missing, stripped, or rusted screws to restore fit.
Ordered Bake Element, Y04100019 (Whirlpool AP4283614) to replace a broken bake element on my 30-year old Jenn-Air Model S125 Downdraft Slide-in electric range. Received the element very quickly but it had been damaged in shipping. Called AppliancePartsPros to report this and they quickly shipped another element - very easy process. To install the element, I turned off the power to the range, put on rubber gloves (just in case) and removed the two sheet metal crews at the rear of the oven -... Read more
Plastic water supply tubing connects your water source to the ice maker or dispenser. Replace if cracked, leaking, or damaged. 1/4" diameter, 8 feet long.
Replaced the broken parts. The water leak was caused by the drain valve not directed into drain pan Read more
Refrigerator not cooling or freezer warm? A failed evaporator fan motor stops cold air circulation. DIY repair in under 30 minutes with basic tools.
Used Google to troubleshoot the issue. Inside the freezer I took the back off. Noticed two things. The evaporator motor was not turning and the top half of the coils were frozen over. Obvious fan not spinning issue. I felt the motor and it was hot. Spun the fan it it started spinning. Put it all back together. Ran OK for 5-6 more days then same issue. I ordered the new motor and then and spun the fan again. It lasted for 2 days. Had to spin the fan to get it going 2 more times until... Read more
Fix a water dispenser that won't stop flowing or won't dispense at all. This limit switch monitors dispenser operation. Simple 5-10 minute repair.
I replaced the switch which was bad and also replaced the water inlet valve. Read more
Fix water leaks in your refrigerator's ice maker or water line. This tube insert reinforces plastic tubing for leak-resistant compression fittings.
Replaced the water tube that went from the plastic tubing to the ice cube tray. Found that even though it was the same exact length as the original, there was only an extremely small gap from the end of the tube to a splash board. This may have been the root cause of my problems. Read more
Speed clip slides over panel edges to create captive threads for mounting screws. Replace worn, missing, or broken clips to restore secure attachment.
Replacement deli drawer pan for refrigerator fresh food section. Restores smooth sliding access for meats and cheeses when original is cracked or missing.
Ordered parts from Appliance Parts Pros. The parts came within 2 days, but the vegetable drawer arrived cracked. I contacted customer support via chat, and they overnighted me a new drawer.. Excellent service! Read more
Stops refrigerator fan rattling and buzzing noise. This rubber grommet cushions the fan motor to reduce vibration. Simple DIY fix, takes under 30 minutes.
Ordered the parts from you guys, evaporator fan motor, fan blade, and new grommets. unscrewed the inside back panel of the freezer, removed the old fan, installed the new one. Read more
Secures refrigerator door hinges for proper alignment and sealing. Replace if loose, stripped, or missing during repairs. Confirm fit with your model.
As soon as the parts arrived, installed them seamlessly. Thank you. Read more
Secures panels, brackets, hinge covers, and internal components inside your refrigerator. Replace missing or stripped screws for rattle-free assembly.
Replace Read more
White plastic bushing that sleeves the hinge pin where your refrigerator door pivots. Replace when cracked, worn, or missing to restore smooth door swing.
Purchased new hinge bushing, door closer, and hinge pin. Read more
Hex washer head screw secures panels, brackets, and components in your refrigerator. Replace worn, stripped, or missing screws for proper alignment.
A friends family had left her refrigerator out on a porch while they were remodeling the house she was supposed to move into. A wind storm blew the refrigerator off the porch and tore the door off. It wasn't dented at all, but when her son pu the door back on, it wouldn't seal. She asked for some help fixing it. I ordered replacement parts for the upper and lower hinge. The parts arrived quickly. I unscrewed the top hinge which was slightly bent. Set the door on its side and replaced the bent... Read more